If you used the above, don't forget to tell Zenoss what the
"somepassword" is. Generally it's "public", and Zenoss defaults to that,
but I believe you can set that under the Snmp Community for the add
device, and as a zProperity I believe for a group.
--
James Pulver
Information Technology Area Supervisor
LEPP Computer Group
Cornell University
firmanmp wrote:
bothunbr wrote:
Firman,
To setup snmp on the SLES 10 client:
1. open yast select software managment and install net-snmp if it is not
allready installed.
2. edit the /etc/snmp/snmpd.conf file and add the following line.
rocommunity somepassword 192.168.1.1
192.168.1.1 = the ip of your zenoss server
3. run /etc/init.d/snmpd restart
You should them be able to model the device in zenoss.
Dear bothunbr,
Thanks alot for your suggest but it doesn't work .... and the respons is still
Time Level Module Message
2008-02-11 13:30:27 INFO zen.DeviceLoader no snmp found for ip =
172.25.33.35
Anything wrong with my snmp setting ?
Best Regards
Firman M P
Lufthansa Systems Indonesia
-------------------- m2f --------------------
Read this topic online here:
http://community.zenoss.com/forums/viewtopic.php?p=16232#16232
-------------------- m2f --------------------
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
