> BOOTING AND ACCESSING 6 SATA DRIVES USING AHCI > > I have installed b48 running 64 bit succesfully on > this machine using dual core Intel Woodcrest > processors. The hardware supports up to 6 SATA II > drives. I have installed 6 Western Digital Raptor > drives. Using Parallell ATA mode I can only see 4 > drives. Using ZFS the sustained throughput is a > disapointing 40MB/s per drive. I was expecting > between 60 and 80. > > If I configure the BIOS to using AHCI mode the AHCI > Bios can see all six drives. Grub appears and > displays the nevada boot menu. However the machine > resets when I try and boot Solaris. > > Can I simply tell solaris to use an AHCI SATA device > for the root filesystem? > > If so what command line should I use?
ZFS discussion group would be a better place of this question. I am cc'ing discussion group This message posted from opensolaris.org _______________________________________________ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss