I'm new to this group, so hello everyone! I am having some issues with my
Nexenta system I set up about two months ago as a zfs/zraid server. I have two
new Maxtor 500GB Sata drives and an Adaptec controller which I believe has a
Silicon Image chipset. Also I have a Seasonic 80+ power supply, so the power
should be as clean as you can get. I had an issue with Nexenta where I had to
reinstall, and since then everytime I reboot I have to type
zpool export amber
zpool import amber
to get my zfs volume mounted. A week ago I noticed a couple of CKSUM errors
when I did a zpool status, so I did a zpool scrub. This is the output after:
# zpool status
pool: amber
state: ONLINE
status: One or more devices has experienced an unrecoverable error. An
attempt was made to correct the error. Applications are unaffected.
action: Determine if the device needs to be replaced, and clear the errors
using 'zpool clear' or replace the device with 'zpool replace'.
see: http://www.sun.com/msg/ZFS-8000-9P
scrub: scrub completed with 0 errors on Mon Nov 13 04:49:35 2006
config:
NAME STATE READ WRITE CKSUM
amber ONLINE 0 0 0
raidz1 ONLINE 0 0 0
c4d0 ONLINE 0 0 51
c5d0 ONLINE 0 0 41
errors: No known data errors
I have md5sums on a lot of the files and it looks like maybe 5% of my files are
corrupted. Does anyone have any ideas? I was under the impression that zfs was
pretty reliable but I guess with any software it needs time to get the bugs
ironed out.
Michael
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
