On Tue, Aug 21, 2007 at 03:09:47PM -0700, Eric Schrock wrote:
> There are no ZFS-recognizable labels on this device. Did you explicitly
> create it on slice 2? From the looks of things, it seems like your disk
> label is corrupt...
Not at all (to my recollection, I specified the devices as
"c2t21000004D9600099d[0123etc.]" to the zpool create command).
With this OS version, format is giving lines such as:
9. c2t21000004D9600099d0 <DEFAULT cyl 48638 alt 2 hd 255 sec 63>
/[EMAIL PROTECTED],0/pci10de,[EMAIL PROTECTED]/pci1077,[EMAIL
PROTECTED]/[EMAIL PROTECTED],0/[EMAIL PROTECTED],0
whereas, again to my recollection, previously the drive manufacturer
was actually listed.
This pool was raidz2, if I should have format do something in
particular with one of the member disks, there should be some
redundancy there.
I did not touch or try to use these member disks during the OS upgrade
and install, but is it likely the new or old installer would have done
so, anyway?
Jeff
>
> - Eric
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
