On Sep 27, 2009, at 2:34 AM, Chris Murray wrote:
Posting this question again as I originally tagged it onto the end
of a series of longwinded posts of mine where I was having problems
replacing a drive. After dodgy cabling and a few power cuts, I
finally got the new drive resilvered.
Before this final replace, I had 3 x 1TB & 1 x 750GB drives in
RAIDZ1 zpool.
After the replace, all four are 1TB, but I can still only see a
total of 2.73TB in zpool list.
I have tried:
1. Reboot.
2. zpool export, then a zpool import.
3. zpool export, reboot, zpool import.
However, I can still only see 2.73TB total. Any ideas what it could
be?
zpool set autoexpand=on poolname
-- richard
All four disks show as 931.51GB in format. Where should I start
troubleshooting to see why ZFS isn't using all of this space?
I'm currently on SXCE119. I tried a mock-scenario in VMware using
the 2009.06 live cd, which worked correctly after an export and
import. Can't do this on my setup, however, as I have upgraded my
zpool to the latest version, and it can't be read using the CD now.
Thanks,
Chris
--
This message posted from opensolaris.org
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
