hi,
After a shutdown my zpool wont go online again, zpool status showed that only
one of five hard drives is online. I tried to export the pool and get it back
in hope of a fix but with no change.
I have replaced the sata cables and even replaced the motherboard but it's
always showes the same status of the zpool.
#zpool import will show
pool: tank
id: 6529188950165676222
state: UNAVAIL
status: One or more devices are missing from the system.
action: The pool cannot be imported. Attach the missing
devices and try again.
see: http://www.sun.com/msg/ZFS-8000-3C
config:
tank UNAVAIL insufficient replicas
raidz1 UNAVAIL insufficient replicas
c7t1d0 UNAVAIL cannot open
c6t1d0 ONLINE
c6t0d0 UNAVAIL cannot open
c5t1d0 UNAVAIL cannot open
c7t0d0 UNAVAIL cannot open
#format shows
c5t1d0: configured with capacity of 698.60GB
c6t0d0: configured with capacity of 698.60GB
c7t0d0: configured with capacity of 698.60GB
c7t1d0: configured with capacity of 698.60GB
AVAILABLE DISK SELECTIONS:
0. c5t0d0 DEFAULT cyl 30512 alt 2 hd 255 sec 63
/p...@0,0/pci1043,8...@5/d...@0,0
1. c5t1d0 ATA-WDCWD7500AAKS-0-4G30 cyl 45598 alt 2 hd 255 sec 126
/p...@0,0/pci1043,8...@5/d...@1,0
2. c6t0d0 ATA-WDCWD7500AAKS-0-4G30 cyl 45598 alt 2 hd 255 sec 126
/p...@0,0/pci1043,8...@5,1/d...@0,0
3. c6t1d0 ATA-WDC WD7500AAKS-0-4G30-698.64GB
/p...@0,0/pci1043,8...@5,1/d...@1,0
4. c7t0d0 ATA-WDCWD7500AAKS-0-4G30 cyl 45598 alt 2 hd 255 sec 126
/p...@0,0/pci1043,8...@5,2/d...@0,0
5. c7t1d0 ATA-WDCWD7500AAKS-0-4G30 cyl 45598 alt 2 hd 255 sec 126
/p...@0,0/pci1043,8...@5,2/d...@1,0
I find the format a bit strange since it lists the capacity of the four missing
zpool drives but not the hard drive that is online.
Any take on how I can fix this or am I screwed?
Jonas
--
This message posted from opensolaris.org
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
