Hi Jonas,

At first sight it looks like your "unopenable" disks were relabeled with SMI label (hence the cyl count on format's output). Not sure if it is completely safe data wise but you could try to relabel your disks with EFI label (use format -e to access label choice).

F.


On 10/18/09 20:47, Jonas Nordin wrote:
hi,

After a shutdown my zpool wont go online again, zpool status showed that only 
one of five hard drives is online. I tried to export the pool and get it back 
in hope of a fix but with no change.
I have replaced the sata cables and even replaced the motherboard but it's 
always showes the same status of the zpool.

#zpool import will show

  pool: tank
    id: 6529188950165676222
 state: UNAVAIL
status: One or more devices are missing from the system.
action: The pool cannot be imported. Attach the missing
        devices and try again.
   see: http://www.sun.com/msg/ZFS-8000-3C
config:

        tank        UNAVAIL  insufficient replicas
          raidz1    UNAVAIL  insufficient replicas
            c7t1d0  UNAVAIL  cannot open
            c6t1d0  ONLINE
            c6t0d0  UNAVAIL  cannot open
            c5t1d0  UNAVAIL  cannot open
            c7t0d0  UNAVAIL  cannot open

#format shows

c5t1d0: configured with capacity of 698.60GB
c6t0d0: configured with capacity of 698.60GB
c7t0d0: configured with capacity of 698.60GB
c7t1d0: configured with capacity of 698.60GB


AVAILABLE DISK SELECTIONS:
       0. c5t0d0 DEFAULT cyl 30512 alt 2 hd 255 sec 63
          /p...@0,0/pci1043,8...@5/d...@0,0
       1. c5t1d0 ATA-WDCWD7500AAKS-0-4G30 cyl 45598 alt 2 hd 255 sec 126
          /p...@0,0/pci1043,8...@5/d...@1,0
       2. c6t0d0 ATA-WDCWD7500AAKS-0-4G30 cyl 45598 alt 2 hd 255 sec 126
          /p...@0,0/pci1043,8...@5,1/d...@0,0
       3. c6t1d0 ATA-WDC WD7500AAKS-0-4G30-698.64GB
          /p...@0,0/pci1043,8...@5,1/d...@1,0
       4. c7t0d0 ATA-WDCWD7500AAKS-0-4G30 cyl 45598 alt 2 hd 255 sec 126
          /p...@0,0/pci1043,8...@5,2/d...@0,0
       5. c7t1d0 ATA-WDCWD7500AAKS-0-4G30 cyl 45598 alt 2 hd 255 sec 126
          /p...@0,0/pci1043,8...@5,2/d...@1,0

I find the format a bit strange since it lists the capacity of the four missing 
zpool drives but not the hard drive that is online.

Any take on how I can fix this or am I screwed?

Jonas

--
Francois Napoleoni / Sun Support Engineer
mail  : francois.napole...@sun.com
phone : +33 (0)1 3403 1707
fax   : +33 (0)1 3403 1114
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss

Reply via email to