(I left the list off last time sorry) No, the resliver should only be happening if there was a spare available. Is the whole thing scrubbing? It looks like it. Can you stop it with a
zpool scrub s <pool> So... Word of warning, I am no expert at this stuff. Think about what I am suggesting before you do it :). Although stopping a scrub is pretty innocuous. -Scott On 9/29/10 9:22 AM, "LIC mesh" <licm...@gmail.com> wrote: > You almost have it - each iSCSI target is made up of 4 of the raidz vdevs - 4 > * 6 = 24 disks. > > 16 targets total. > > We have one LUN with status of "UNAVAIL" but didn't know if removing it > outright would help - it's actually available and well as far as the target is > concerned, so we thought it went UNAVAIL as a result of iSCSI timeouts - we've > since fixed the switches buffers, etc. > > See: > http://pastebin.com/pan9DBBS > > > > On Wed, Sep 29, 2010 at 12:17 PM, Scott Meilicke > <scott.meili...@craneaerospace.com> wrote: >> OK, let me see if I have this right: >> >> 8 shelves, 1T disks, 24 disks per shelf = 192 disks >> 8 shelves, 2T disks, 24 disks per shelf = 192 disks >> Each raidz is six disks. >> 64 raidz vdevs >> Each iSCSI target is made up of 8 of these raidz vdevs (8 x 6 disks = 48 >> disks) >> Then the head takes these eight targets, and makes a raidz2. So the raidz2 >> depends upon all 384 disks. So when a failure occurs, the resliver is >> accessing all 384 disks. >> >> If I have this right, which I am in serious doubt :), then that will either >> take an enormous amount of time to complete, or never. It looks like never. >> >> Recovery: >> >> From the head, can you see which vdev has failed? If so, can you remove it to >> stop the resliver? >> >> >> >> On 9/29/10 8:57 AM, "LIC mesh" <licm...@gmail.com <http://licm...@gmail.com> >> > wrote: >> >>> This is an iSCSI/COMSTAR array. >>> >>> The head was running 2009.06 stable with version 14 ZFS, but we updated that >>> to build 134 (kept the old OS drives) - did not, however, update the zpool - >>> it's still version 14. >>> >>> The targets are all running 2009.06 stable, exporting 4 raidz1 LUNs each of >>> 6 drives - 8 shelves have 1TB drives, the other 8 have 2TB drives. >>> >>> The head sees the filesystem as comprised of 8 vdevs of 8 iSCSI LUNs each, >>> with SSD ZIL and SSD L2ARC. >>> >>> >>> >>> On Wed, Sep 29, 2010 at 11:49 AM, Scott Meilicke >>> <scott.meili...@craneaerospace.com >>> <http://scott.meili...@craneaerospace.com> > wrote: >>>> What version of OS? >>>> Are snapshots running (turn them off). >>>> >>>> So are there eight disks? >>>> >>>> >>>> >>>> On 9/29/10 8:46 AM, "LIC mesh" <licm...@gmail.com >>>> <http://licm...@gmail.com> <http://licm...@gmail.com> > wrote: >>>> >>>>> It's always running less than an hour. >>>>> >>>>> It usually starts at around 300,000h estimate(at 1m in), goes up to an >>>>> estimate in the millions(about 30mins in) and restarts. >>>>> >>>>> Never gets past 0.00% completion, and K resilvered on any LUN. >>>>> >>>>> 64 LUNs, 32x5.44T, 32x10.88T in 8 vdevs. >>>>> >>>>> >>>>> >>>>> >>>>> On Wed, Sep 29, 2010 at 11:40 AM, Scott Meilicke >>>>> <scott.meili...@craneaerospace.com >>>>> <http://scott.meili...@craneaerospace.com> >>>>> <http://scott.meili...@craneaerospace.com> > wrote: >>>>>> Has it been running long? Initially the numbers are way off. After a >>>>>> while it settles down into something reasonable. >>>>>> >>>>>> How many disks, and what size, are in your raidz2? >>>>>> >>>>>> -Scott >>>>>> >>>>>> >>>>>> On 9/29/10 8:36 AM, "LIC mesh" <licm...@gmail.com >>>>>> <http://licm...@gmail.com> <http://licm...@gmail.com> >>>>>> <http://licm...@gmail.com> > wrote: >>>>>> >>>>>>> Is there any way to stop a resilver? >>>>>>> >>>>>>> We gotta stop this thing - at minimum, completion time is 300,000 hours, >>>>>>> and maximum is in the millions. >>>>>>> >>>>>>> Raidz2 array, so it has the redundancy, we just need to get data off. >>>> >> >> We value your opinion! <http://www.craneae.com/surveys/satisfaction.htm> >> How may we serve you better?Please click the survey link to tell us how we >> are doing: <http://www.craneae.com/surveys/satisfaction.htm> >> http://www.craneae.com/surveys/satisfaction.htm >> <http://www.craneae.com/surveys/satisfaction.htm> >> >> Your feedback is of the utmost importance to us. Thank you for your time. >> >> Crane Aerospace & Electronics Confidentiality Statement: >> The information contained in this email message may be privileged and is >> confidential information intended only for the use of the recipient, or any >> employee or agent responsible to deliver it to the intended recipient. Any >> unauthorized use, distribution or copying of this information is strictly >> prohibited and may be unlawful. If you have received this communication in >> error, please notify the sender immediately and destroy the original message >> and all attachments from your electronic files. > > -- Scott Meilicke | Enterprise Systems Administrator | Crane Aerospace & Electronics | +1 425-743-8153 | M: +1 206-406-2670 -------------------------------------------------------------------------------- We value your opinion! How may we serve you better? Please click the survey link to tell us how we are doing: http://www.craneae.com/ContactUs/VoiceofCustomer.aspx Your feedback is of the utmost importance to us. Thank you for your time. -------------------------------------------------------------------------------- Crane Aerospace & Electronics Confidentiality Statement: The information contained in this email message may be privileged and is confidential information intended only for the use of the recipient, or any employee or agent responsible to deliver it to the intended recipient. Any unauthorized use, distribution or copying of this information is strictly prohibited and may be unlawful. If you have received this communication in error, please notify the sender immediately and destroy the original message and all attachments from your electronic files. --------------------------------------------------------------------------------
_______________________________________________ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
