I am opening a new thread since I found somebody else reported a similar failure in May and I didn't see a resolution hopefully this post will be easier to find for people with similar problems. Original thread was http://opensolaris.org/jive/thread.jspa?threadID=140861
System: snv_151a 64 bit on Intel. Error: panic[cpu0] assertion failed: zvol_get_stats(os, nv) == 0, file: ../../common/fs/zfs/zfs_ioctl.c, line: 1815 Failure first seen on Solaris 10, update 8 History: I recently received two 320G drives and realized from reading this list it would have been better if I would have done the install on the small drives but I didn't have them at the time. I added the two 320G drives and created tank mirror. I moved some data from other sources to the tank and then decided to go ahead and do a new install. In preparation for that I moved all the data I wanted to save onto the rpool mirror and then installed Solaris 10 update 8 again on the 320G drives. When my system rebooted after the installation, I saw for some reason it used my tank pool as root. I realize now since it was originally a root pool and had boot blocks this didn't help. Anyway I shut down, changed the boot order and then booted into my system. It paniced when trying to access the tank and instantly rebooted. I had to go through this several times until I caught a glimpse of one of the first messages: assertion failed: zvol_get_stats(os, nv) Here is what my system looks like when I boot into failsafe mode. # zpool import pool: rpool id: 16453600103421700325 state: ONLINE action: The pool can be imported using its name or numeric identifier. config: rpool ONLINE mirror ONLINE c0t2d0s0 ONLINE c0t3d0s0 ONLINE pool: tank id: 12861119534757646169 state: ONLINE action: The pool can be imported using its name or numeric identifier. config: tank ONLINE mirror ONLINE c0t0d0s0 ONLINE c0t1d0s0 ONLINE # zpool import tank cannot import 'tank': pool may be in use from other system use '-f' to import anyway Here is a photo of my screen (hah hah old fashioned "screen shot") when Sol 11 starts now that I tried importing my pool it fails constantly. # zpool import -f tank http://imageshack.us/photo/my-images/13/zfsimportfail.jpg/ I installed Solaris 11 Express USB via Hiroshi-san's Windows tool. Unfortunately it also panics trying to import the pool although zpool import shows the pool online with no errors just like in the above doc. and here is an eerily identical photo capture made by somebody with a similar/identical error. http://prestonconnors.com/zvol_get_stats.jpg At first I thought it was a copy of my screenshot but I see his terminal is white and mine is black. Looks like the problem has been around since 2009 although my problem is with a newly created mirror pool that had plenty of space available (200G in use out of about 500G) and no snapshots were taken. Similar discussion with discouraging lack of follow up: http://opensolaris.org/jive/message.jspa?messageID=376366 Looks like the defect, it's closed and I see no resolution. https://defect.opensolaris.org/bz/show_bug.cgi?id=5682 I have about 200G of data on the tank pool, about 100G or so I don't have anywhere else. I created this pool specifically to make a "safe place" to store data that I had accumulated over several years and didn't have organized yet. I can't believe such a serious bug has been around for two years and hasn't been fixed. Can somebody please help me get this data back? Thank you. Jim -- This message posted from opensolaris.org _______________________________________________ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
