Steve,I had about 6 TX profiles. The major components of the old profiles are
found in Setup Transmit, and EQ. I opened these two windows for each profile,
then printed the screen (Control + Print Screen). Then I pasted the screen
print into Paint, and saved with the name of the profile. To recreate these in
2.3, I just opened the screen print pictures and made the new profiles look
like the old ones. Ten minutes for all? Since you have so many profiles,
you'd like 2.3. Perhaps my favorite inclusion into the new profile is that
the Mic choice in Mixer is now saved. Jim KJ2P
> Date: Wed, 7 Mar 2012 23:53:41 -0800
> From: f...@sgsterling.com
> To: flexradio@flex-radio.biz
> Subject: [Flexradio] New Version 2.3.5 A No Go-- For Now
>
> Tried the new 2.3.5 version, but without a transfer utility to move
> transmit profiles, I'll need to stay with 2.2.3.
>
> Too much work went into setting transmit profiles on the station desk
> mic (separate ragchew and DX profiles for myself and wife, my Heil
> Pro-set Plus headset with ragchew and DX profiles, my wife's Ten-Tec 777
> headset with ragchew and DX profiles-- ya all get the picture. I think
> we have 12 regularly used profiles, each with their own equalizer and
> audio chain settings. Many hours of work.
>
> No worries-- I was months on the old 1.8x version while I learned
> PowerSDR. There are some very nice goodies in 2.3.5 that I look forward
> to, but none that will induce me to corral my wife and spend another
> 8-10 hours trying to redo 12 transmit profiles.
>
> Steve WA7DUH
>
>
> On 3/4/2012 5:32 PM, Ray, K9DUR wrote:
> > New setup data for SDRDataTransfer is now available. This version supports
> > PowerSDR v2.3.5 to be released on Monday, March 5th.
> >
> > PowerSDR v2.3.5 introduces major changes to the structure of the TXProfile
> > and the TXProfileDef tables. As a result, these 2 tables may or may not be
> > transferred depending on the version of PowerSDR and the date of the
> > SDRDataTransfer setup data installed according to the following rules:
> >
> > 1.) If the SDRDataTransfer setup data is dated prior to March 5, 2012, then
> > the TXProfile& the TXProfileDef tables can only be transferred between
> > PowerSDR v2.2.3 or earlier versions.
> >
> > 2.) If the SDRDataTransfer setup data is dated on or after March 5, 2012,
> > then the TXProfile& the TXProfileDef tables can only be transferred between
> > PowerSDR v2.3.5 or later versions.
> >
> > 3.) Under no circumstances can the TXProfile table or the TXProfileDef
> > table be transferred between PowerSDR v2.2.3 (or earlier) and PowerSDR
> > v2.3.5 (or later).
> >
> > I will be working on SDRDataTransfer v5.0.0 which will address this issue.
> > However, to accomplish transferring TX profile data safely between PowerSDR
> > v2.3.5& earlier versions will require some fundamental changes to
> > SDRDataTransfer.
> >
> > 73, Ray, K9DUR
> > http://k9dur.info
> >
> >
> >
> > _______________________________________________
> > FlexRadio Systems Mailing List
> > FlexRadio@flex-radio.biz
> > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> > Knowledge Base: http://kc.flexradio.com/ Homepage:
> > http://www.flexradio.com/
>
>
> _______________________________________________
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
