Yes, here it is in the logs: UPS status: 230.6 190.0 221.3 000 49.9 2.29 37.1 00000000
The voltage is reported as 2.29. Would be nice if the driver could report the voltage at the same resolution. -- Peter Carlos Rodrigues wrote: > > Yes, that's probably it. The value displayed is rounded to one decimal poin= > t. > > I'll too need to take a look at those logs (taken when the UPS is > fully charged), posting them to the list is a good idea. > > On 4/23/06, Peter Selinger <[EMAIL PROTECTED]> wrote: > > Could the reason be that the UPS reports voltage to more than one > > decimal, and the value used by the driver to calculate the load is > > actually more accurate than the value displayed? > > > > I tried answering my own question by looking at lonely wolf's logs, > > but could not retrieve it. -- Peter > > > > Carlos Rodrigues wrote: > > > > > > Now, that's strange. It should read 100%. In fact, just to be sure I > > > faked the voltage here and it reads 100%... > > > > > > Can you give me more details about your setup? Version, architecture > > > and stuff... > > > > > > On 4/23/06, lonely wolf <[EMAIL PROTECTED]> wrote: > > > > I guess the 98.5 is the best we can get instead of the 100% which wou= > ld > > > > be normal (and reported by the bundled software) ? > > > > > > > > > -- > > > Carlos Rodrigues > > > > > > _______________________________________________ > > > Nut-upsuser mailing list > > > Nut-upsuser@lists.alioth.debian.org > > > http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser > > > > > > > > > > -- > Carlos Rodrigues > > _______________________________________________ > Nut-upsuser mailing list > Nut-upsuser@lists.alioth.debian.org > http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser > _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser