I was able to get it to work. I found out I added the wrong location to
PATH. I fixed it and got the command to work.
On Thursday, February 8, 2024 at 1:00:52 PM UTC-6 Sai Chandhrasekhar wrote:
> I did get a warning about that and added it to my PATH before running the
> command, but I still got the result. I did what you suggested and still got
> the same error message.
>
> On Thursday, February 8, 2024 at 12:27:29 PM UTC-6 Matthias Koeppe wrote:
>
>> That's great progress.
>>
>> Did pip issue any warnings when you installed sage_conf?
>> In particular, it may have warned that the installation location for
>> scripts is not in your PATH.
>> If so, you can fix it as follows:
>>
>> export PATH="$(python3 -c 'import sysconfig;
>> print(sysconfig.get_path("scripts", "posix_user"))'):$PATH"
>>
>> On Thursday, February 8, 2024 at 8:38:27 AM UTC-8 Sai Chandhrasekhar
>> wrote:
>>
>>> I was able to install sage_conf successfully, but when I run, "python3
>>> -m pip install $(sage-config SAGE_SPKG_WHEELS)/*.whl sage_setup", I get the
>>> following error messages:
>>>
>>> zsh: command not found: sage-config
>>>
>>> zsh: no matches found: /*.whl
>>>
>>> On Wednesday, February 7, 2024 at 3:13:27 PM UTC-6 Matthias Koeppe wrote:
>>>
>>>> To start from scratch in this mode of installation, you will need to
>>>> remove the directory "/Users/user/.sage/sage-10.3.beta7-Darwin-x86_64/"
>>>>
>>>> On Wednesday, February 7, 2024 at 12:10:21 PM UTC-8 Sai Chandhrasekhar
>>>> wrote:
>>>>
>>>>> I am still getting the same error. In the config.log files, I see
>>>>> this: x86_64-apple-darwin13.4.0-clang: command not found. I have tried
>>>>> uninstalling and reinstalling Xcode and the Xcode command line tools, but
>>>>> I
>>>>> still get the same result.
>>>>>
>>>>>
>>>>> On Wednesday, February 7, 2024 at 11:06:12 AM UTC-6 Matthias Koeppe
>>>>> wrote:
>>>>>
>>>>>> Thanks for sharing these logs.
>>>>>> The key failure is here:
>>>>>>
>>>>>> configure:3938: x86_64-apple-darwin13.4.0-clang -march=core2
>>>>>> -mtune=haswell -mssse3 -ftree-vectorize -fPIC -fstack-protector-strong
>>>>>> -O2
>>>>>> -pipe -isystem /Users/user/anaconda3/include -D_FORTIFY_SOURCE=2
>>>>>> -isystem
>>>>>> /Users/user/anaconda3/include
>>>>>> -L/Users/user/.sage/sage-10.2-Darwin-x86_64/local/lib
>>>>>> -Wl,-ld_classic,-rpath,/Users/user/.sage/sage-10.2-Darwin-x86_64/local/lib
>>>>>>
>>>>>> -L/Users/user/.sage/sage-10.2-Darwin-x86_64/local/lib
>>>>>> -Wl,-ld_classic,-rpath,/Users/user/.sage/sage-10.2-Darwin-x86_64/local/lib
>>>>>>
>>>>>> -Wl,-headerpad_max_install_names -Wl,-dead_strip_dylibs
>>>>>> -Wl,-rpath,/Users/user/anaconda3/lib -L/Users/user/anaconda3/lib
>>>>>> conftest.c
>>>>>> >&5
>>>>>> ld: library not found for -ld_classic
>>>>>> clang-16: error: linker command failed with exit code 1 (use -v to
>>>>>> see invocation)
>>>>>>
>>>>>> What's happening here is that a workaround that we use on macOS for
>>>>>> compilation with XCode is incompatible with the conda toolchain.
>>>>>> I have a fix for this in https://github.com/sagemath/sage/pull/37237
>>>>>>
>>>>>> For now, if you want to use the installation method using "pip
>>>>>> install sage_conf", deactivate conda first.
>>>>>> Or alternatively if you want to use conda, use one of the
>>>>>> installation methods described in
>>>>>> https://doc.sagemath.org/html/en/installation/conda.html
>>>>>>
>>>>>>
>>>>>> On Tuesday, February 6, 2024 at 4:10:53 PM UTC-8 Sai Chandhrasekhar
>>>>>> wrote:
>>>>>>
>>>>>>> I also tried to run the install command again with the --pre flag
>>>>>>> and got the same result.
>>>>>>>
>>>>>>> On Tuesday, February 6, 2024 at 5:54:11 PM UTC-6 Sai Chandhrasekhar
>>>>>>> wrote:
>>>>>>>
>>>>>>>> On Tuesday, February 6, 2024 at 5:14:56 PM UTC-6 Matthias Koeppe
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>>
>>>>>>>>> and
>>>>>>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/local/var/tmp/sage/build/libatomic_ops-7.8.0/src/config.log
>>>>>>>>>
>>>>>>>>> please
>>>>>>>>>
>>>>>>>>> On Tuesday, February 6, 2024 at 2:36:21 PM UTC-8 Sai
>>>>>>>>> Chandhrasekhar wrote:
>>>>>>>>>
>>>>>>>>>> On Tuesday, February 6, 2024 at 4:22:59 PM UTC-6 Matthias Koeppe
>>>>>>>>>> wrote:
>>>>>>>>>>
>>>>>>>>>>> Could you post one of these log files please? For example
>>>>>>>>>>> info-6.8.log
>>>>>>>>>>>
>>>>>>>>>>> And could you try "python3 -m pip install --pre sage_conf" also?
>>>>>>>>>>>
>>>>>>>>>>> On Tuesday, February 6, 2024 at 12:15:08 PM UTC-8 Sai
>>>>>>>>>>> Chandhrasekhar wrote:
>>>>>>>>>>>
>>>>>>>>>>>> When I ran python3 -m pip install sage_conf I got this error
>>>>>>>>>>>> message:
>>>>>>>>>>>>
>>>>>>>>>>>> Error building Sage.
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> The following package(s) may have failed to build (not
>>>>>>>>>>>> necessarily
>>>>>>>>>>>>
>>>>>>>>>>>> during this run of 'make all-build'):
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> * package: gf2x-1.3.0
>>>>>>>>>>>>
>>>>>>>>>>>> last build time: Feb 6 14:07
>>>>>>>>>>>>
>>>>>>>>>>>> log file:
>>>>>>>>>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/logs/pkgs/gf2x-1.3.0.log
>>>>>>>>>>>>
>>>>>>>>>>>> build directory:
>>>>>>>>>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/local/var/tmp/sage/build/gf2x-1.3.0
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> * package: cddlib-0.94m
>>>>>>>>>>>>
>>>>>>>>>>>> last build time: Feb 6 14:07
>>>>>>>>>>>>
>>>>>>>>>>>> log file:
>>>>>>>>>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/logs/pkgs/cddlib-0.94m.log
>>>>>>>>>>>>
>>>>>>>>>>>> build directory:
>>>>>>>>>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/local/var/tmp/sage/build/cddlib-0.94m
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> * package: cliquer-1.22
>>>>>>>>>>>>
>>>>>>>>>>>> last build time: Feb 6 14:07
>>>>>>>>>>>>
>>>>>>>>>>>> log file:
>>>>>>>>>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/logs/pkgs/cliquer-1.22.log
>>>>>>>>>>>>
>>>>>>>>>>>> build directory:
>>>>>>>>>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/local/var/tmp/sage/build/cliquer-1.22
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> * package: libatomic_ops-7.8.0
>>>>>>>>>>>>
>>>>>>>>>>>> last build time: Feb 6 14:07
>>>>>>>>>>>>
>>>>>>>>>>>> log file:
>>>>>>>>>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/logs/pkgs/libatomic_ops-7.8.0.log
>>>>>>>>>>>>
>>>>>>>>>>>> build directory:
>>>>>>>>>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/local/var/tmp/sage/build/libatomic_ops-7.8.0
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> * package: m4ri-20200115
>>>>>>>>>>>>
>>>>>>>>>>>> last build time: Feb 6 14:07
>>>>>>>>>>>>
>>>>>>>>>>>> log file:
>>>>>>>>>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/logs/pkgs/m4ri-20200115.log
>>>>>>>>>>>>
>>>>>>>>>>>> build directory:
>>>>>>>>>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/local/var/tmp/sage/build/m4ri-20200115
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> * package: ecm-7.0.5
>>>>>>>>>>>>
>>>>>>>>>>>> last build time: Feb 6 14:07
>>>>>>>>>>>>
>>>>>>>>>>>> log file:
>>>>>>>>>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/logs/pkgs/ecm-7.0.5.log
>>>>>>>>>>>>
>>>>>>>>>>>> build directory:
>>>>>>>>>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/local/var/tmp/sage/build/ecm-7.0.5
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> * package: info-6.8
>>>>>>>>>>>>
>>>>>>>>>>>> last build time: Feb 6 14:07
>>>>>>>>>>>>
>>>>>>>>>>>> log file:
>>>>>>>>>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/logs/pkgs/info-6.8.log
>>>>>>>>>>>>
>>>>>>>>>>>> build directory:
>>>>>>>>>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/local/var/tmp/sage/build/info-6.8
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> * package: pari-2.15.4
>>>>>>>>>>>>
>>>>>>>>>>>> last build time: Feb 6 14:08
>>>>>>>>>>>>
>>>>>>>>>>>> log file:
>>>>>>>>>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/logs/pkgs/pari-2.15.4.log
>>>>>>>>>>>>
>>>>>>>>>>>> build directory:
>>>>>>>>>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/local/var/tmp/sage/build/pari-2.15.4
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> For those packages the following error message was printed
>>>>>>>>>>>> earlier:
>>>>>>>>>>>>
>>>>>>>>>>>> configure: error: C compiler cannot create executables
>>>>>>>>>>>>
>>>>>>>>>>>> On Tuesday, February 6, 2024 at 2:01:03 PM UTC-6 Matthias
>>>>>>>>>>>> Koeppe wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> According to your config.log, the run of "configure"
>>>>>>>>>>>>> succeeded.
>>>>>>>>>>>>> That config.log contains error messages from various compiler
>>>>>>>>>>>>> invocations is a normal part of the configure process.
>>>>>>>>>>>>>
>>>>>>>>>>>>> What is the actual problem that you encountered?
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Monday, February 5, 2024 at 2:58:36 PM UTC-8 Sai
>>>>>>>>>>>>> Chandhrasekhar wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Monday, February 5, 2024 at 4:48:08 PM UTC-6 Dima
>>>>>>>>>>>>>> Pasechnik wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On 5 February 2024 21:58:54 GMT, "dan...@gmail.com" <
>>>>>>>>>>>>>>> dan...@gmail.com> wrote:
>>>>>>>>>>>>>>> >You could just use Sage_macOS
>>>>>>>>>>>>>>> ><
>>>>>>>>>>>>>>> https://github.com/3-manifolds/Sage_macOS/releases/tag/v2.2.0>,
>>>>>>>>>>>>>>> quick and
>>>>>>>>>>>>>>> >easy!
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> for Sage development, you need a source install.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>> >On Monday, February 5, 2024 at 3:49:02 PM UTC-6 Matthias
>>>>>>>>>>>>>>> Koeppe wrote:
>>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>> >> We would need to see the full logs
>>>>>>>>>>>>>>> >>
>>>>>>>>>>>>>>> >> On Monday, February 5, 2024 at 1:26:31 PM UTC-8 Sai
>>>>>>>>>>>>>>> Chandhrasekhar wrote:
>>>>>>>>>>>>>>> >>
>>>>>>>>>>>>>>> >>> Hello,
>>>>>>>>>>>>>>> >>>
>>>>>>>>>>>>>>> >>> When I tried to run python3 -m pip install sage_conf, I
>>>>>>>>>>>>>>> got this error
>>>>>>>>>>>>>>> >>> message from config.log. I tried to change to GCC but
>>>>>>>>>>>>>>> then I got a message
>>>>>>>>>>>>>>> >>> that Sage cannot be built on macOS with GNU's gcc. Any
>>>>>>>>>>>>>>> suggestions on what
>>>>>>>>>>>>>>> >>> to do would be appreciated.
>>>>>>>>>>>>>>> >>> configure:6595: x86_64-apple-darwin13.4.0-clang -V >&5
>>>>>>>>>>>>>>> >>> clang-16: error: argument to '-V' is missing (expected 1
>>>>>>>>>>>>>>> value)
>>>>>>>>>>>>>>> >>> clang-16: error: no input files
>>>>>>>>>>>>>>> >>> configure:6606: $? = 1
>>>>>>>>>>>>>>> >>> configure:6595: x86_64-apple-darwin13.4.0-clang
>>>>>>>>>>>>>>> -qversion >&5
>>>>>>>>>>>>>>> >>> clang-16: error: unknown argument '-qversion'; did you
>>>>>>>>>>>>>>> mean '--version'?
>>>>>>>>>>>>>>> >>> clang-16: error: no input files
>>>>>>>>>>>>>>> >>> configure:6606: $? = 1
>>>>>>>>>>>>>>> >>> configure:6595: x86_64-apple-darwin13.4.0-clang -version
>>>>>>>>>>>>>>> >&5
>>>>>>>>>>>>>>> >>> clang-16: error: unknown argument '-version'; did you
>>>>>>>>>>>>>>> mean '--version'?
>>>>>>>>>>>>>>> >>> clang-16: error: no input files
>>>>>>>>>>>>>>> >>>
>>>>>>>>>>>>>>> >>
>>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
--
You received this message because you are subscribed to the Google Groups
"sage-devel" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to sage-devel+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/sage-devel/24917c2a-e58d-4b49-961e-c94cfb35e6b3n%40googlegroups.com.
