On Saturday 19 April 2008 12:19:55 am Leskep wrote:
Hi Alan
This is using the digi port on the 857 with all dsp functions off
but I need 2400 hz of audio passband just to fit the non standard
RFSM8000 signal in and just cant get it from stock standard 857
Maybe just put it back in my mobile
- Original Message -
From: Leskep
To: digitalradio@yahoogroups.com
Sent: Saturday, April 19, 2008 12:11 AM
Subject: Re: [digitalradio] RFSM8000 and Yaesu FT857
Hi Skip
The problem is that I need to pass around 2.4 khz of signal audio
and with the stock filter it will not do
Greetings to all
Is anyone using the FT857 for RFSM8000
I have been trying mine out over the past two days after getting a
new Signalink USB interface
Big problem with the RX passband - it is not wide enough using
the standard filter supplied with the FT857 and consequently too
much of the
. The best around here seem to be the little green
ones from Radio Shack.
73, Skip KH6TY
- Original Message -
From: Leskep
To: Digitalradio
Sent: Friday, April 18, 2008 9:08 PM
Subject: [digitalradio] RFSM8000 and Yaesu FT857
Greetings to all
Is anyone using the FT857
Hello,
You should be using the digi port, and there is a specific setting that
allows you to center the filter passband around typical digi signals. I
find 200 hz up works best for ALE.
Since the signal is now centered, I can then even use the DSP bandpass
to really tighten up.
If you have
the
necessary frequency response. The best around here seem to be the little green
ones from Radio Shack.
73, Skip KH6TY
- Original Message -
From: Leskep
To: Digitalradio
Sent: Friday, April 18, 2008 9:08 PM
Subject: [digitalradio] RFSM8000 and Yaesu FT857
Greetings to all
the FT920 works well on RFSM
Regards
Les
From: Alan Barrow
Sent: Saturday, April 19, 2008 1:55 PM
To: digitalradio@yahoogroups.com
Subject: Re: [digitalradio] RFSM8000 and Yaesu FT857
Hello,
You should be using the digi port, and there is a specific setting that
allows you to center
