8.2 amd64
ad8 is a 3TB Seagate on nforce4-ultra controller
At boot:
ad8: 2861588MB ST3000DM001 9YN166 CC4B at ata4-master UDMA100 SATA 3Gb/s
DEBUG g_part_gpt.c gpt_read_hdr() ad8 succeeded with pp-sectorsize=512
An hour later:
# dd if=/dev/ad8 bs=4k count=1 of=/dev/null
dd: /dev/ad8: No
8.2 amd64
ad8 is a 3TB Seagate on nforce4-ultra controller
At boot:
ad8: 2861588MB ST3000DM001 9YN166 CC4B at ata4-master UDMA100 SATA 3Gb/s
DEBUG g_part_gpt.c gpt_read_hdr() ad8 succeeded with pp-sectorsize=512
An hour later:
# dd if=/dev/ad8 bs=4k count=1 of=/dev/null
dd: /dev/ad8: No such
The Motorola Droid RAZR i (a variant
of the RAZR m) has an intel atom z2460 processor in it.
Unless I am mistaken, this is an amd64 compatible chip that
mainline FreeBSD could run on, yes ?
Without getting into the specifics of loading the system
(and using a touchscreen as input), would
Hi,
I wanted to have the point of view of the community on the best approach in
order to handle a quite large system with couple of jails (shouldn't have more
than 5 to 10). Whole system is based on zfs. I'll use this as a backup server.
I have been using the handbook approach so far. It is
Le 25 janv. 2013 à 18:41, Steve O'Hara-Smith a écrit :
On Fri, 25 Jan 2013 18:25:06 +0100
bsd b...@todoo.biz wrote:
Hi,
I wanted to have the point of view of the community on the best approach
in order to handle a quite large system with couple of jails (shouldn't
have more than 5
Hello.
I installed 9.1-R amd64 on a flash drive and boot off it to do remote ZFS
backups. Booting and the text console screen, including the other alt-f?
consoles, work fine at this point. A few minutes into the ZFS receive my
console turns into blocky garbage: http://imgur.com/y8kWR . The
Hello,
I have just acquired an Intel R2312GZ4GC4 which I have equipped with a Adaptec
RAID 51245 and 6 WD red disks of 3To - It'll come with 32Gb of Kingston ECC
RAM.
I am planing to use It as a backup device on a second hosting facility to
backup couple of critical servers of mine.
I have a problem with various parts of web pages stopping
before getting completely downloaded. Links has a useful retries
setting (setup-network options-retries) which seems to fix
this. I need a similar fix for firefox 3.6.2
Firefox 15
URL: about:config
search: retry
[ no response on mozilla@ list, trying questions@ ]
I have a problem with various parts of web pages stopping
before getting completely downloaded. Links has a useful retries
setting (setup-network options-retries) which seems to fix
this. I need a similar fix for firefox 3.6.2
Le 21 août 2012 à 04:10, John Levine a écrit :
Are you running pecl-APC? If so, what version? There's a major issue with
the
latest.
Hmmn, that might have been it.
I backed down to 5.3, but when I have a chance I'll try 5.4 again without
APC.
Tried it without APC, didn't help.
Hello friends,
I am looking for a FreeBSD compatible card in Mini PCI-Express.
I know that the hardware list provides a lot of links, but since there are many
providers, I thought It could be faster to ask the mailing list directly.
This will be used as an AP in a pfSense appliance (for
grarpamp writes:
Plenty of millionaires
out there now who are in tune with opensource who could startup,
buy the same ARM/ATOM/etc chips, the same support chips, load
Android and sell it to the masses.
Would you please post a list of these millionaire FLOSS entrepreneurs?
Thank you.
Hi,
I have followed the tutorial provided in
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/jails-application.html
I have now five jails up and running and I am very happy with the system.
One of my jail is acting as an important DNS server and It needs to be up to
date.
I have
Hello,
I would like to setup a syslog server inside a jail
I have setup couple of other jail and they are already working as a DNS server
and a HTTP server.
The next step would be to configure a new jail as a syslog server.
I have the following parameters :
jail_enable=YES
Le 30 janv. 2012 à 16:59, Matthew Seaman a écrit :
On 30/01/2012 15:40, bsd wrote:
I am still not able to get the log correctly sent to the specified jail… ??
Are you running syslogd in the host environment?
Yes I am running it both in the host and jail environment.
If so, it's
Le 30 janv. 2012 à 17:15, bsd a écrit :
Le 30 janv. 2012 à 16:59, Matthew Seaman a écrit :
On 30/01/2012 15:40, bsd wrote:
I am still not able to get the log correctly sent to the specified jail… ??
Are you running syslogd in the host environment?
Yes I am running it both in the host
Hi,
I have a simple 1U server with two disks that I have configured as a jail
server.
I want to setup a simple yet very efficient backup policy for my jail
environment.
This server is running a ZFS filesystem.
Ideally I would like to backup the main zfsroot/jail and all subdirectories on
Le 17 janv. 2012 à 22:52, Devin Teske a écrit :
-Original Message-
From: owner-freebsd-questi...@freebsd.org [mailto:owner-freebsd-
questi...@freebsd.org] On Behalf Of bsd
Sent: Tuesday, January 17, 2012 1:04 PM
To: Liste FreeBSD
Subject: Backup strategy for zfs + jail
Hi
Hi,
I am following the FBSD handbook tutorial in order to install the world in my
jail template :
# cd /usr/src
# make installworld DESTDIR=/jails/j/mroot
The directory already exists.
I have the following errors :
ln -fs libcom_err.so.5 /jails/j/mroot/usr/lib/libcom_err.so
install
Le 12 janv. 2012 à 19:46, bsd a écrit :
Le 12 janv. 2012 à 17:29, ss griffon a écrit :
On Thu, Jan 12, 2012 at 8:09 AM, bsd b...@todoo.biz wrote:
Hi,
I am following the FBSD handbook tutorial in order to install the world in
my jail template :
# cd /usr/src
# make installworld
Hi,
I am trying to run both postgres and zabbix in the same jail and I am only able
to start postgres or zabbix not both of them.
I have tuned my sysctl on master host as follow :
kern.ipc.shmmax=268435456
kern.ipc.shmall=409600
kern.ipc.semmap=256
security.jail.allow_raw_sockets=1
Le 5 janv. 2012 à 14:56, bsd a écrit :
Hi,
I am trying to run both postgres and zabbix in the same jail and I am only
able to start postgres or zabbix not both of them.
I have tuned my sysctl on master host as follow :
kern.ipc.shmmax=268435456
kern.ipc.shmall=409600
Hi,
I would like to know if there is an official howto that could help me in the
process of installing zfs on root.
I will need a raid 1 configuration and plan to use the whole disks to be part
of the pool.
How far can we go with the installer ?
Do I have to use gpart ?
What is best way
Le 20 déc. 2011 à 18:42, Ivan Klymenko a écrit :
В Tue, 20 Dec 2011 18:11:36 +0100
bsd b...@todoo.biz пишет:
Hi,
I would like to know if there is an official howto that could help
me in the process of installing zfs on root.
I will need a raid 1 configuration and plan to use
Hi,
I have been configuring a jail system using the howto provided here :
http://www.freebsd.org/doc/handbook/jails-application.html
The is now correctly starting, but I can't seem to use the network stack.
root@master 16:52:55 ~ - jls
JID IP Address Hostname
Le 30 nov. 2011 à 17:17, Damien Fleuriot a écrit :
On 11/30/11 5:05 PM, bsd wrote:
Hi,
I have been configuring a jail system using the howto provided here :
http://www.freebsd.org/doc/handbook/jails-application.html
The is now correctly starting, but I can't seem to use the network
Le 30 nov. 2011 à 17:45, masayoshi a écrit :
- Original Message -
From: bsd b...@todoo.biz
To: Liste FreeBSD freebsd-questions@freebsd.org
Cc:
Sent: Thursday, 1 December 2011 1:05 AM
Subject: Problem with jail network
Hi,
I have been configuring a jail system using
Le 30 nov. 2011 à 18:36, Damien Fleuriot a écrit :
On 11/30/11 6:29 PM, bsd wrote:
Le 30 nov. 2011 à 17:17, Damien Fleuriot a écrit :
On 11/30/11 5:05 PM, bsd wrote:
Hi,
I have been configuring a jail system using the howto provided here :
http://www.freebsd.org/doc/handbook
Le 30 nov. 2011 à 18:38, Коньков Евгений a écrit :
Здравствуйте, bsd.
Вы писали 30 ноября 2011 г., 19:29:34:
b Le 30 nov. 2011 а 17:17, Damien Fleuriot a йcrit :
On 11/30/11 5:05 PM, bsd wrote:
Hi,
I have been configuring a jail system using the howto provided here :
http
Let's say I'd like to add a small amount of extra security to my SSH login
process.
Let's say I decide the way I want to do this is by requiring BOTH a password
and an RSA key. There appear to be patches, or procedures, that allow me to do
this. So to log in, I would be required to enter a
ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognize dependent libraries... pass_all
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking
I booted the 8.2-RELEASE CD on my Intel mac mini, which has a thumb drive
plugged into USB.
I promptly entered FIXIT and used dd to zero out the ENTIRE internal hard
drive. I may use it, I may not, but for now I want to reduce variables and I
don't want remnants of OSX on that disk tripping
Hi,
I am trying to reset the bootloader of a pfSense nanoBSD CF card.
I need the boot loader to be reset because
The embedded image set the bootloader to use a serial console. That isn't
necessary with the box I am trying to use (the BIOS does console redirection
to the serial port for
Reducing the color depth to 16 allows the wimpy Rage XL (8 MiB) to do 1920x1080.
So then I moved the old slow X terminal out of the way and moved the shiny new
Dell ST2220T LCD into the prime spot in front of the keyboard drawer...
...and the cable doesn't reach. Two HD-15 to BNC cables
Have you tried:
$ xset +dpms
to use standby etc.?
xset: unknown option +dpms
I assume it needs more than the 5 coaxes to do dpms.
(It did appear to be working with the short cable that came
with the monitor.)
Font for xterm: x11-fonts/inconsolata-ttf
I installed package
That is incorrect. Don't set AllowEmptyInput, just turn off AutoAddDevices.
http://www.wonkity.com/~wblock/docs/html/aei.html
I reduced the config file to:
Section ServerLayout
Identifier X.org Configured
# Screen 0 Screen0 0 0
InputDevice Mouse0 CorePointer
Now to see if I can get this wimpy rage xl to do 1920x1080.
Please don't mess with modelines, it should not be needed any more.
Just set the resolutions desired in the Screen/Display section. If
modelines are really required, get them out of /var/log/Xorg.0.log.
But they almost certainly
FreeBSD 8.2
packages: packages-8.2-release
amd64
ATI Rage XL
Dell ST2220T (1920x1080)
Xorg -configure generates an xorg.conf file that somehow
puts it into 1280x1024 mode and the monitor refuses to use it.
I haven't found a way to get the full modeline info for whatever
it is actually putting
Q1: how do you start X?
Xorg
(no config file)
result: display works (1400x1050), but no keyboard or mouse
Xorg -configure
(creates /root/xorg.conf.new)
Xorg -config /root/xorg.conf.new
result: 1280x1024 which monitor doesn't like
I also tried Xorg -keyboard Keyboard0 -pointer Mouse0
with and
perryh running 8.1-RELEASE (and not 8-STABLE)
[ ... ]
perryh /packages-8.1-release/
AH HA
The .message file contains the solution (I hope):
packages-*-release directories are built from the ports collection
shipped with the release, and are not updated thereafter.
packages-*-stable and
FreeBSD 8.2
amd64
Attempting to install X11 server.
Attempt to install package xf86-video-fbdev-0.4.2.tbz
gives conflict between perl-5.10.1_3 and perl-5.12.3
even when installing into clean directory tree.
# mkdir /tmp/test_pkg_install
# export PKG_DBDIR=/tmp/test_pkg_install/var/db/pkg
#
Machine has been running FreeBSD/amd64 with 2 GiB of memory.
I just installed a 2nd 2 GiB of memory for 4 GiB total.
FreeBSD thinks it now has 32 GiB ???
FreeBSD 8.2-RELEASE #22: Tue Jun 7 12:37:21 PDT 2011
CPU: AMD Athlon(tm) 64 Processor 3000+ (1808.34-MHz K8-class CPU)
real memory =
# dmidecode 2.11
SMBIOS 2.2 present.
Handle 0x0005, DMI type 5, 24 bytes
Memory Controller Information
Error Detecting Method: 64-bit ECC
Error Correcting Capabilities:
None
Supported Interleave: One-way Interleave
Current Interleave: One-way
Hello,
I wanted to know what is the best way to build an ESS (extended service set aka
group of Access Points) using FreeBSD. Knowing that we are looking at the
classic features of such network:
1. Couple of AP's configured with the same SSID
2. Authentication
3. Security
4. Roaming
FreeBSD 8.2 amd64
xpdf version 3.02
whines:
Warning: translation table syntax error: Unknown keysym name: osfActivate
Warning: ... found while parsing ':KeyosfActivate:
ManagerParentActivate()'
Warning: String to TranslationTable conversion encountered errors
Warning: translation
FreeBSD 8.2 amd64
xpdf version 3.02
whines:
Warning: translation table syntax error: Unknown keysym name: osfActivate
Warning: ... found while parsing ':KeyosfActivate:
ManagerParentActivate()'
Warning: String to TranslationTable conversion encountered errors
Warning: translation
Le 15 déc. 2010 à 20:20, Warren Block a écrit :
On Wed, 15 Dec 2010, bsd wrote:
Is there a way to dd to a file to create an iso image and then restore
(still using dd from this image).
I only have one IDE -- USB cable so this is the reason why It'd more
simple for me to create an iso
Le 16 déc. 2010 à 16:03, Bernt Hansson a écrit :
2010-12-16 11:55, bsd:
I have tried to use the compressed approach using smthg like:
# mount /dev/ad0s1a /mnt
# cd /mnt
# dd if=/dev/zero of=zerofile bs=1M
I have a lot of errors on standerr output such as :
g_vfs_done() : da0s1a
Is there a way to dd to a file to create an iso image and then restore (still
using dd from this image).
I only have one IDE -- USB cable so this is the reason why It'd more simple
for me to create an iso image of the disk and then restore.
Using dump won't be very useful because I won't be
This is not so clear !
http://www.itworld.com/open-source/130820/openbsdfbi-allegations-denied-named-participant
We should ask competent persons like Colin Percival… the FreeBSD Security
Officer since 2005.
He would have a point of view much more precise than anyone of us could have.
;-)
Just to be precise, I am not trying to do an ISO image of a running root FS,
but of a USB attached disk.
…
Le 15 déc. 2010 à 16:45, Giorgos Keramidas a écrit :
On Wed, 15 Dec 2010 16:11:45 +0100, bsd b...@todoo.biz wrote:
Is there a way to dd to a file to create an iso image
Gregober --- PGP ID -- 0x1BA3C2FD
bsd @at@ todoo.biz
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe
, then as an option:
6. validate changes updates
7. submit patch to the FBSD port
Thanks for your support.
Gregober --- PGP ID -- 0x1BA3C2FD
bsd @at@ todoo.biz
Hello all,
Thank you for your response in advance.
I am running i386 FreeBSD 7.2 p4 on an HP DL380 G2. I upgraded from 6.1 p23
in March but the machine was built last fall. I am not at liberty to
upgrade the machine due to its purpose. However I agree it is time. I had
been using
their end of life that could be
recycled as backup solution at a very convenient price…
Thanks for you help.
Gregober --- PGP ID -- 0x1BA3C2FD
bsd @at@ todoo.biz
Gregober --- PGP ID -- 0x1BA3C2FD
bsd @at@ todoo.biz
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any
:/dev/ad1s1a
[…]
Then I do not have access to the device using manual system mounting…
What would be your advise?
Any idea what is precisely going wrong?
Thank you very much.
G.B.
Gregober --- PGP ID -- 0x1BA3C2FD
bsd @at@ todoo.biz
on different boot, It is offering me
sometimes the 1st option and other time the second one):
1. 30401 cylinders | 255 heads | 63 sectors
2. 484521 cylinders | 16 heads | 63 sectors
Global dis size is 250GB (LBA 488397168)
Le 24 juin 2010 à 20:37, bsd a écrit :
Hello,
I am trying
I connect to the internet, my FreeBSD server connects to the internet
using PPPoE connection with static IP and I want to reach it through the
internet.
Thank you!
László
Gregober --- PGP ID -- 0x1BA3C2FD
bsd @at@ todoo.biz
I have a serious problem after an upgrade of openssl !
/libexec/ld-elf.so.1: Shared object libcrypto.so.5 not found, required by
sshd
Gregober --- PGP ID -- 0x1BA3C2FD
bsd @at@ todoo.biz
P
I have downgraded to openssl-0.9.8l_1 and It has solved my problem…
openssl-0.9.8l_3 is obviously boggus !
Le 21 janv. 2010 à 09:50, bsd a écrit :
I have a serious problem after an upgrade of openssl !
/libexec/ld-elf.so.1: Shared object libcrypto.so.5 not found, required by
sshd
been installed with a fresh BSD
install.
I want to know how i can copy, or re-install this specific port…
I have in my possession :
1. the distfiles located on the running server in /usr/ports/distfiles/slony.xx
2. a newer version of the Makefile (couple of version ahead)…
Any idea or clue
?
Should the new empty partition be the exact same size as the dumped partition ?
Is there a tool that could allow me to restore remotely ?
Any advice or howto will be (very) welcome.
Thanks.
P.S. Happy new BSD year !!
Gregober --- PGP ID
Le 4 janv. 2010 à 19:56, Jerry McAllister a écrit :
On Mon, Jan 04, 2010 at 07:08:51PM +0100, bsd wrote:
Hello folks,
I would like to know how to proceed in order to restore a dump from a
backup headless server (remotely using ssh).
How am I supposed to proceed, should I first
Le 4 janv. 2010 à 22:36, Jerry McAllister a écrit :
On Mon, Jan 04, 2010 at 08:42:33PM +0100, bsd wrote:
Le 4 janv. 2010 à 19:56, Jerry McAllister a écrit :
On Mon, Jan 04, 2010 at 07:08:51PM +0100, bsd wrote:
Hello folks,
I would like to know how to proceed in order to restore
:54 +0100
bsd b...@todoo.biz wrote:
Hello,
I have been provided with a 1To backup space by my hosting company…
unfortunately It is only accessible by FTP which does not allow me to
do the regular backup / restore I use to do using RSYNC.
What are the options I have in order to do
).
Gregober --- PGP ID -- 0x1BA3C2FD
bsd @at@ todoo.biz
P Please consider your environmental responsibility before printing this
e-mail
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org
, 2009 at 05:29:54PM +0100, bsd wrote:
Hello,
I have been provided with a 1To backup space by my hosting company…
unfortunately It is only accessible by FTP which does not allow me to do the
regular backup / restore I use to do using RSYNC.
What are the options I have in order to do
--- PGP ID -- 0x1BA3C2FD
bsd @at@ todoo.biz
P Please consider your environmental responsibility before printing
this e-mail
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman
Gregober --- PGP ID -- 0x1BA3C2FD
bsd @at@ todoo.biz
P Please consider your environmental responsibility before printing
this e-mail
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org
Glenn,
My mailer.conf contains:
/etc/mail cat mailer.conf
# $FreeBSD: src/etc/mail/mailer.conf,v 1.3.34.1 2009/04/15 03:14:26 kensmith
Exp $
#
# Execute the real sendmail program, named /usr/libexec/sendmail/sendmail
#
sendmail/usr/libexec/sendmail/sendmail
send-mail
an RT[URL]FM or useful
flame appreciated.
Thanks!
Gregober --- PGP ID -- 0x1BA3C2FD
bsd @at@ todoo.biz
P Please consider your environmental responsibility before printing
this e-mail
??
Gregober --- PGP ID -- 0x1BA3C2FD
bsd @at@ todoo.biz
P Please consider your environmental responsibility before printing
this e-mail
___
freebsd-questions@freebsd.org mailing
would like to
follow good advice.
The last memories I had regarding proxy was using Squid //
I don't know if this is a good choice ??
Any pointer or how to will be welcome.
Gregober --- PGP ID -- 0x1BA3C2FD
bsd @at@ todoo.biz
Hello,
How can I log messages sent to local2 to a given log file ?
Which file do I have to update in order to achieve that?
Thanks for your support.
Gregober --- PGP ID -- 0x1BA3C2FD
bsd @at@ todoo.biz
with that?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Gregober --- PGP ID -- 0x1BA3C2FD
bsd @at@ todoo.biz
On Wed, Feb 18, 2009 at 8:44 PM, Kailash Kailash
kailash.kail...@zscaler.com wrote:
I am using FreeBSD 7.0 in 64 BIT mode. Same code compiled on BSD 7.0 runs
50% speed (as expected by CPU and code architecture) compared to BSD 6.2.
Here is one real code with binary output. On 3.0 GHz Woodcrest
--level 0 network on
chkconfig --level 0 iptables on
¯
¯
¯
¯
¯
¯
¯
¯
¯
¯
¯
¯
Gregober --- PGP ID -- 0x1BA3C2FD
bsd @at@ todoo.biz
¯
¯
¯
¯
¯
¯
¯
¯
¯
¯
¯
¯
P Please consider your environmental
Hello,
I am trying to see if someone has already configured an APC PowerChute
software on FreeBSD.
There is a linux version, I was just wondering how to set It up on BSD
and if anyone has successfully installed such soft…
I have installed a BSD box in Angola in unstable electrical
!
Thanks for your support.
Gregober --- PGP ID -- 0x1BA3C2FD
bsd @at@ todoo.biz
P Please consider your environmental responsibility before printing
this e-mail
;
};
};
It's good ? because my named.log is empty
Gregober --- PGP ID -- 0x1BA3C2FD
bsd @at@ todoo.biz
P Please consider your environmental responsibility before printing
this e-mail
the truth!
Le 22 janv. 09 à 20:51, Stephen Corbesero a écrit :
I used to use Amanda on a small FreeBSD RAID server that used a single
DLT drive. It held up pretty well.
Gregober --- PGP ID -- 0x1BA3C2FD
bsd @at@ todoo.biz
Yes,
This is probably the one I'll go for…
There is a good hack described in the O'Reilly BSD hacks to setup
Bacula…
I'll consider this article as a starting point…
Thank you very much folks.
Le 23 janv. 09 à 04:21, Geoff Fritz a écrit :
On Thu, Jan 22, 2009 at 08:30:56PM +0100, bsd
all ports…
Thanks for your help.
Gregober --- PGP ID -- 0x1BA3C2FD
bsd @at@ todoo.biz
P Please consider your environmental responsibility before printing
this e-mail
Le 15 janv. 09 à 12:19, Herbert J. Skuhra a écrit :
2009/1/15 bsd b...@todoo.biz:
Hello,
I was looking for an efficient way to reinstall (recompile due to
an update
in the perl port) all installed p5 ports…
Have you tried perl-after-upgrade? See UPDATING and man page.
No…
That's
services at boot time (is there a way of bypassing
at boot time the rc.conf file) ?
Thanks for your support.
Gregober --- PGP ID -- 0x1BA3C2FD
bsd @at@ todoo.biz
P Please consider your
.
Le 25 nov. 08 à 16:27, bsd a écrit :
Hello I have updated my server (Intel Modular server) using the
classical
# freebsd-update install
And I am now facing very weired issues only on amd64 servers I am
maintaining.
Servers boots and then freezes when It launch ipfilter. This is
not a low
is not fully
started.
I would like to introduce something like a sleep 10 timer in the
service startup process…
How can I do that?
Gregober --- PGP ID -- 0x1BA3C2FD
bsd @at@ todoo.biz
P Please consider
to
line1item1 line1item2 line1item3
Any good idea or example will be welcome.
Gregober --- PGP ID -- 0x1BA3C2FD
bsd @at@ todoo.biz
P Please consider your environmental responsibility before printing
will be most welcome.
Something similar to this could be nice: http://www.untangle.com/
Thanks for your support.
Gregober --- PGP ID -- 0x1BA3C2FD
bsd @at@ todoo.biz
P Please consider your
?
Gregober --- PGP ID -- 0x1BA3C2FD
bsd @at@ todoo.biz
P Please consider your environmental responsibility before printing
this e-mail
___
freebsd
-new.
*** Error code 1
Stop in /usr/ports/security/amavisd-new.
I don't know how to install such library…
What should I do ?
Gregober --- PGP ID -- 0x1BA3C2FD
bsd @at@ todoo.biz
P Please
the uninstall / reinstall.
Took me half a day for three servers… But at least I have a very clean
install with 30 ports instead of 250 !!
Thanks everybody for your wise answers.
Le 27 juil. 08 à 15:17, andrew clarke a écrit :
On Sun 2008-07-27 12:52:56 UTC+0200, bsd ([EMAIL PROTECTED]) wrote
.
Sincerly yours.
G.B.
Le 28 juil. 08 à 19:10, bsd a écrit :
Hello folks,
I am trying to install amavisd-new for filtering purposes on an
amd64 install.
It complains at compile startup not to be able to install it
=== amavisd-new-2.6.1,1 requires 32-bit libraries installed
under /usr
and running !!
Thanks.
Gregober --- PGP ID -- 0x1BA3C2FD
bsd @at@ todoo.biz
P Please consider your environmental responsibility before printing
this e-mail
).
Sincerly yours.
Gregober --- PGP ID -- 0x1BA3C2FD
bsd @at@ todoo.biz
P Please consider your environmental responsibility before printing
this e-mail
Adding some infos to the issue, plus partial answer…
Main answer still needed !!
Le 1 juil. 08 à 18:53, bsd a écrit :
Hello folks,
I have just baught brand new servers with an 8Gb memory attached to
each of these server.
I generaly use the freebsd-update procedure to update and apply
-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Gregober --- PGP ID -- 0x1BA3C2FD
bsd @at@ todoo.biz
P
just need to
have a little java app working…
Thanks for your support.
Gregober --- PGP ID -- 0x1BA3C2FD
bsd @at@ todoo.biz
P Please consider your environmental responsibility before printing
: 76319MB Seagate ST380811AS 3.AAE at ata2-master SATA150
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad4s1a
rl0: link state changed to UP
- Hide quoted text -
On Fri, May 2, 2008 at 7:20 PM, Mel [EMAIL PROTECTED]
wrote:
On Friday 02 May 2008 13:28:44 Free BSD wrote:
We've been
1 - 100 of 483 matches
Mail list logo