Johan Hovold johan@... writes:
Care to test the patch below (against usb-next) on both your LE and BE
machines?
Thanks I'll try your patch next WE.
I've patched the code in a similar way a few days ago, but I have strange
problems: I can do a write and a read, but then I have to close the
[ Please make sure to CC the linux-usb list as well. ]
On Tue, Feb 18, 2014 at 02:57:45AM +0100, Magnus wrote:
After plugging in the plexgear adapter into my linux boxes:
Fedora 18, Debian 3.11.0-15-generic #25-Ubuntu and weezy it doesnt
send any commands to the servo controller chip on the
On Tue, Feb 18, 2014 at 08:49:17AM +, Ludovic wrote:
Johan Hovold johan@... writes:
Care to test the patch below (against usb-next) on both your LE and BE
machines?
Thanks I'll try your patch next WE.
Great.
I've patched the code in a similar way a few days ago, but I have strange
On Sun, Feb 16, 2014 at 12:35:06PM +0100, Emanuel Koczwara wrote:
Hi,
I have a device (thermal printer) which communicates through rs232. It
has also usb adapter/converter build-in.
root@emanuel-laptop:/home/emanuel# lsusb
Bus 004 Device 004: ID 8086:0189 Intel Corp.
Bus 004 Device 008:
Dear Andrezej,
On 2/10/2014 7:15 PM, Andrzej Pietrasiewicz wrote:
W dniu 10.02.2014 14:16, Amit Virdi pisze:
Interrupt endpoints behave quite similar to the bulk endpoints with the
difference that the endpoints expect data sending/reception request at
particular intervals till the whole data
Dear Arnaud Ebalard,
On Sat, 18 Jan 2014 22:49:17 +0100, Arnaud Ebalard wrote:
I started suspecting the introduction of MSI support in Marvell PCIe
host controller driver (FL1009 is on the PCIe bus) and compiled a
a 3.13.0-rc8 w/ CONFIG_PCI_MSI disabled (it was enabled in all my
previous
hi all
In my PC have the kernel linux usb gadget support enabled but when i
try to load the module:
sudo modprobe g_ether
FATAL: Error inserting g_ether
(/lib/modules/3.13.2/kernel/drivers/usb/gadget/g_ether.ko): No such
device
maybe my usb is not supported by the driver. I don't know.
i have a
From: Ivan T. Ivanov iiva...@mm-sol.com
Since commit 62bb84e (usb: gadget: ci13xxx: convert to platform device)
start address of the capability registers is not passed correctly to
udc_probe(). Fix this.
Signed-off-by: Ivan T. Ivanov iiva...@mm-sol.com
---
drivers/usb/chipidea/ci_hdrc_msm.c |
From: Ivan T. Ivanov iiva...@mm-sol.com
Hi,
This series intend to fix driver, which was broken for a while.
It is used to create peripheral role device, which in coordination
with phy-usb-msm driver will provide USB2.0 gadget support for
Qualcomm targets.
Changes since initial version.
-
From: Ivan T. Ivanov iiva...@mm-sol.com
Allows controller to be specified via device tree.
Pass PHY phandle specified in DT to core driver.
Signed-off-by: Ivan T. Ivanov iiva...@mm-sol.com
---
drivers/usb/chipidea/ci_hdrc_msm.c | 23 ++-
1 file changed, 22 insertions(+), 1
On 02/17/2014 09:18 AM, Robert Baldyga wrote:
On 02/17/2014 01:37 AM, Jingoo Han wrote:
On Friday, February 14, 2014 6:44 PM, Robert Baldyga wrote:
On 02/13/2014 10:10 PM, dingu...@altera.com wrote:
From: Dinh Nguyen dingu...@altera.com
Hello,
This patch series combines the dwc2 host
Support get_msglevel and set_msglevel.
Signed-off-by: Hayes Wang hayesw...@realtek.com
---
drivers/net/usb/r8152.c | 16
1 file changed, 16 insertions(+)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index db98842..0654bd3 100644
--- a/drivers/net/usb/r8152.c
PHY reset is necessary after some hw settings. However, it would
cause the linking down, and so does the set_speed function. Combine
the PHY reset with set_speed function. That could reduce the frequency
of linking down and accessing the PHY register.
Signed-off-by: Hayes Wang
Set disable_hub_initiated_lpm = 1.
Signed-off-by: Hayes Wang hayesw...@realtek.com
---
drivers/net/usb/r8152.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index ff02d5d..db98842 100644
--- a/drivers/net/usb/r8152.c
+++
Replace netif_rx with netif_receive_skb to avoid disabling irq frequently
for increasing the efficiency.
Signed-off-by: Hayes Wang hayesw...@realtek.com
---
drivers/net/usb/r8152.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/usb/r8152.c
Add up method for rtl_ops and asign relative functions. Move
clear_bp() and hw_phy_cfg() from init method to up method of rtl_ops.
Call rtl_ops.up() for ndo_open() and rtl_ops.down for ndo_stop().
Replace allocating the memory in probe() with in ndo_open().
Signed-off-by: Hayes Wang
Modify the following functions.
- r8153_u1u2en
- r8153_u2p3en
- r8153_power_cut_en
Signed-off-by: Hayes Wang hayesw...@realtek.com
---
drivers/net/usb/r8152.c | 20 ++--
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/net/usb/r8152.c
Disable teredo for RTL8152 by default.
Signed-off-by: Hayes Wang hayesw...@realtek.com
---
drivers/net/usb/r8152.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index f303549..3ff11ed 100644
--- a/drivers/net/usb/r8152.c
+++
Support runtime suspend for RTL8152 and RTL8153.
Move tx_bottom() from tasklet to delayed_work. That avoids to
transmit tx packets after calling autosuspend.
Signed-off-by: Hayes Wang hayesw...@realtek.com
---
drivers/net/usb/r8152.c | 181 ++--
1
Modify the method of enabling the PHY to clear BMCR_PDOWN only.
Signed-off-by: Hayes Wang hayesw...@realtek.com
---
drivers/net/usb/r8152.c | 15 +--
1 file changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index
Support WOL for RTL8152 and RTL8153.
Signed-off-by: Hayes Wang hayesw...@realtek.com
---
drivers/net/usb/r8152.c | 118 ++--
1 file changed, 105 insertions(+), 13 deletions(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index
Except for RTL_VER_01, replace loading the MAC address from PLA_IDR
with from PLA_BACKUP. The default MAC address may be modified by
the other OS, so the PLA_IDR may be not the default MAC address.
The data in the PLA_BACKUP address of the RTL_VER_01 may be destoryed,
so load MAC address from
Change some flows or behavior to improve the efficiency or make the
code readable. Besides, support WOL and runtime suspend.
Hayes Wang (14):
r8152: move some functions
r8152: add three functions
r8152: replace some types from int to bool
r8152: load the default MAC address
r8152:
Move the following functions which is for the further coding.
- rtl_clear_bp
- r8153_clear_bp
- r8153_teredo_off
- r8152b_disable_aldps
- r8152b_enable_aldps
- r8152b_hw_phy_cfg
Signed-off-by: Hayes Wang hayesw...@realtek.com
---
drivers/net/usb/r8152.c | 106
W dniu 18.02.2014 14:15, Arturo Veras pisze:
hi all
In my PC have the kernel linux usb gadget support enabled but when i
Why do you have usb gadget support in a PC in the first place?
What are you trying to achieve? What you could achieve is for
example to make your PC act as a mass storage
Hi,
*always* Cc the mailing list please.
On Mon, Feb 17, 2014 at 04:43:11PM -0800, Amit Uttamchandani wrote:
I was looking at the changes for net2280.c and saw your name come up in
a few of the more recent changes. I wanted to know, are you aware of
support for PLXs USB 338o using this
On Fri, Jan 31, 2014 at 02:27:09AM -0200, Fabio Estevam wrote:
From: Fabio Estevam fabio.este...@freescale.com
Using module_platform_driver() can make the code simpler.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
Acked-by: Felipe Balbi ba...@ti.com
---
Build-tested only
On 02/14/2014 03:33 PM, Lee Jones wrote:
Use a meaningful name for the reference clocks so that it indicates the
function.
CC: Lee Jones lee.jo...@linaro.org
CC: Samuel Ortiz sa...@linux.intel.com
Signed-off-by: Roger Quadros rog...@ti.com
---
drivers/mfd/omap-usb-host.c | 6 +++---
1
On Fri, Jan 31, 2014 at 02:29:52AM -0200, Fabio Estevam wrote:
From: Fabio Estevam fabio.este...@freescale.com
Using module_platform_driver() can make the code simpler.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
Acked-by: Felipe Balbi ba...@ti.com
---
Build-tested only
On Mon, Feb 03, 2014 at 01:59:39PM +0530, Sachin Kamat wrote:
Fixes the following compilation warning:
drivers/usb/gadget/s3c-hsudc.c: In function ‘s3c_hsudc_probe’:
drivers/usb/gadget/s3c-hsudc.c:1347:1: warning: label ‘err_add_device’
defined but not used [-Wunused-label]
Signed-off-by:
On Fri, Jan 31, 2014 at 02:29:53AM -0200, Fabio Estevam wrote:
From: Fabio Estevam fabio.este...@freescale.com
Building keystone_defconfig leads to the following build warnings:
drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but
not used [-Wunused-function]
On Mon, Feb 03, 2014 at 01:59:38PM +0530, Sachin Kamat wrote:
Pass value instead of address as expected by 'usb_ep_set_maxpacket_limit'.
Fixes the following compilation error introduced by commit e117e742d310
(usb: gadget: add maxpacket_limit field to struct usb_ep):
On Mon, Feb 03, 2014 at 11:57:32AM +0100, Christian Riesch wrote:
Hi,
commit 787f5627bec80094db487bfcb401e9744f181aed
usb: musb: make davinci and da8xx glues depend on BROKEN
Signed-off-by: Felipe Balbi ba...@ti.com
adds a dependency of the drivers/usb/musb/da8xx.c driver to BROKEN.
I
On Tue, Dec 17, 2013 at 09:40:35AM +0100, Robert Baldyga wrote:
This patch removes parameter struct usb_gadget_driver* from udc_stop()
function
in struct usb_gadget_ops. This parameter is useless in udc_stop() function,
and
UDC drivers can work well without it, so removeing it makes code
Hi,
On Tue, Jan 07, 2014 at 05:45:50PM +0800, Huang Rui wrote:
Per dwc3 2.70a spec in the Device-Specific Event (DEVT), the field of
Event Information Bits(EvtInfo) uses [24:16] bits, and it has 9 bits
not 8 bits. And the following reserved field uses [31:25] bits not
[31:24] bits, and it has
On Thu, Jan 09, 2014 at 11:54:13AM +0100, Andreas Larsson wrote:
Rename struct platform_device pointers from ofdev to pdev for clarity.
Suggested by Mark Rutland.
Signed-off-by: Andreas Larsson andr...@gaisler.com
---
drivers/usb/gadget/gr_udc.c | 18 +-
1 file changed,
On Tue, Feb 18, 2014 at 7:12 AM, Felipe Balbi ba...@ti.com wrote:
On Mon, Feb 17, 2014 at 04:43:11PM -0800, Amit Uttamchandani wrote:
I was looking at the changes for net2280.c and saw your name come up in
a few of the more recent changes. I wanted to know, are you aware of
support for PLXs
Use a meaningful name for the reference clocks so that it indicates the
function.
CC: Lee Jones lee.jo...@linaro.org
CC: Samuel Ortiz sa...@linux.intel.com
Signed-off-by: Roger Quadros rog...@ti.com
---
drivers/mfd/omap-usb-host.c | 6 +++---
1 file changed, 3 insertions(+), 3
On Fri, Jan 17, 2014 at 10:59:25AM +0800, Bo Shen wrote:
When the SoC is earlier than sama5d3 SoC, which have the same number
endpoints and DMAs. However for sama5d3 SoC, it has different number
for endpoints and DMAs. So, define USBA_NR_DMAs for DMA channels
Signed-off-by: Bo Shen
On Fri, Jan 17, 2014 at 10:22:35AM +0100, Markus Pargmann wrote:
debugfs files to show the contents of important dsps registers.
Signed-off-by: Markus Pargmann m...@pengutronix.de
---
drivers/usb/musb/musb_dsps.c | 54
1 file changed, 54
On Fri, Jan 17, 2014 at 12:26:50PM -0600, Josh Cartwright wrote:
On Fri, Jan 17, 2014 at 11:58:51AM -0600, Josh Cartwright wrote:
Both the PM_RUNTIME and PM_SLEEP callbacks call into the common
msm_otg_{suspend,resume} routines, however these routines are only being
built when
On Mon, Jan 20, 2014 at 10:00:15AM +0800, Li Jun wrote:
This patch adds HNP polling operation function for OTG fsm.
Signed-off-by: Li Jun b47...@freescale.com
---
drivers/usb/phy/phy-fsm-usb.c |2 ++
include/linux/usb/otg-fsm.h |9 +
2 files changed, 11 insertions(+), 0
On Tue, Feb 18, 2014 at 10:24:16AM -0600, Felipe Balbi wrote:
On Fri, Jan 17, 2014 at 12:26:50PM -0600, Josh Cartwright wrote:
On Fri, Jan 17, 2014 at 11:58:51AM -0600, Josh Cartwright wrote:
Both the PM_RUNTIME and PM_SLEEP callbacks call into the common
msm_otg_{suspend,resume}
On Wed, Feb 05, 2014 at 03:34:18PM +0100, Daniel Mack wrote:
schedule_delayed_work() takes the delay in jiffies, not msecs.
This bug slipped in with the recent reset logic cleanup
(8ed1fb790ea: usb: musb: finish suspend/reset work independently from
musb_hub_control()).
Signed-off-by:
Both the PM_RUNTIME and PM_SLEEP callbacks call into the common
msm_otg_{suspend,resume} routines, however these routines are only being
built when CONFIG_PM_SLEEP. In addition, msm_otg_{suspend,resume} also
depends on msm_hsusb_config_vddcx(), which is only built when
CONFIG_PM_SLEEP.
Fix the
On 02/18/2014 05:33 PM, Felipe Balbi wrote:
On Wed, Feb 05, 2014 at 03:34:18PM +0100, Daniel Mack wrote:
schedule_delayed_work() takes the delay in jiffies, not msecs.
This bug slipped in with the recent reset logic cleanup
(8ed1fb790ea: usb: musb: finish suspend/reset work independently from
On Fri, Jan 17, 2014 at 05:04:55PM +0100, Michal Nazarewicz wrote:
On Thu, Jan 16 2014, Andrzej Pietrasiewicz wrote:
Fix possible NULL pointer dereference introduced in
219580e64f035bb9018dbb08d340f90b0ac50f8c
usb: f_fs: check quirk to pad epout buf size when not aligned to
On Tue, Feb 18, 2014 at 10:40:12AM -0600, Felipe Balbi wrote:
On Fri, Jan 17, 2014 at 05:04:55PM +0100, Michal Nazarewicz wrote:
On Thu, Jan 16 2014, Andrzej Pietrasiewicz wrote:
Fix possible NULL pointer dereference introduced in
219580e64f035bb9018dbb08d340f90b0ac50f8c
usb: f_fs:
On Tue, Feb 18, 2014 at 10:33:21AM -0600, Josh Cartwright wrote:
On Tue, Feb 18, 2014 at 10:24:16AM -0600, Felipe Balbi wrote:
On Fri, Jan 17, 2014 at 12:26:50PM -0600, Josh Cartwright wrote:
On Fri, Jan 17, 2014 at 11:58:51AM -0600, Josh Cartwright wrote:
Both the PM_RUNTIME and
On Tue, Feb 18, 2014 at 05:41:12PM +0100, Daniel Mack wrote:
On 02/18/2014 05:33 PM, Felipe Balbi wrote:
On Wed, Feb 05, 2014 at 03:34:18PM +0100, Daniel Mack wrote:
schedule_delayed_work() takes the delay in jiffies, not msecs.
This bug slipped in with the recent reset logic cleanup
On Fri, Dec 27, 2013 at 10:38:30AM +0800, Peter Chen wrote:
Add fsl,imx6q-usbphy for imx6dq and imx6dl, add
fsl,imx6sl-usbphy for imx6sl.
Signed-off-by: Peter Chen peter.c...@freescale.com
anybody from DT to give me an Acked-by ?
--
balbi
signature.asc
Description: Digital signature
On Fri, Dec 27, 2013 at 10:38:40AM +0800, Peter Chen wrote:
We need this to keep PHY's power on or off during the system
suspend mode. If we need to enable USB wakeup, then we
must keep PHY's power being on during the system suspend mode.
Otherwise, we need to keep PHY's power being off to
Hello.
On 02/18/2014 04:21 PM, Ivan T. Ivanov wrote:
From: Ivan T. Ivanov iiva...@mm-sol.com
Allows controller to be specified via device tree.
Pass PHY phandle specified in DT to core driver.
Signed-off-by: Ivan T. Ivanov iiva...@mm-sol.com
---
drivers/usb/chipidea/ci_hdrc_msm.c |
Hi,
On Mon, Feb 17, 2014 at 02:26:54PM +0800, Clanlab (Taiwan) Linux Project wrote:
@@ -1168,5 +1191,23 @@ void gether_disconnect(struct gether *link)
}
EXPORT_SYMBOL(gether_disconnect);
+static int __init gether_init(void)
+{
+ gether_wq = create_singlethread_workqueue(gether);
On Tue, Feb 18, 2014 at 10:20:54AM -0600, Felipe Balbi wrote:
On Fri, Jan 17, 2014 at 10:22:35AM +0100, Markus Pargmann wrote:
debugfs files to show the contents of important dsps registers.
Signed-off-by: Markus Pargmann m...@pengutronix.de
---
drivers/usb/musb/musb_dsps.c | 54
On Tue, Feb 18, 2014 at 02:46:00PM +0800, Lu, Baolu wrote:
Hi list,
Linux kernel (3.12.8) fails to setup EHCI debug port on my Sandy Bridge
server. This seems to be a normal thing as I tried on other machines and got
the same result.
Do you have a EHCI debug connector to attach to it? That
On Tue, Feb 18, 2014 at 09:01:29AM -0800, Greg KH wrote:
On Tue, Feb 18, 2014 at 02:46:00PM +0800, Lu, Baolu wrote:
Hi list,
Linux kernel (3.12.8) fails to setup EHCI debug port on my Sandy Bridge
server. This seems to be a normal thing as I tried on other machines and got
the same
On Tue, Feb 18, 2014 at 08:59:11AM -0800, Greg KH wrote:
On Tue, Feb 18, 2014 at 10:20:54AM -0600, Felipe Balbi wrote:
On Fri, Jan 17, 2014 at 10:22:35AM +0100, Markus Pargmann wrote:
debugfs files to show the contents of important dsps registers.
Signed-off-by: Markus Pargmann
Hi,
On Tue, 2014-02-18 at 20:53 +0300, Sergei Shtylyov wrote:
Hello.
On 02/18/2014 04:21 PM, Ivan T. Ivanov wrote:
From: Ivan T. Ivanov iiva...@mm-sol.com
Allows controller to be specified via device tree.
Pass PHY phandle specified in DT to core driver.
Signed-off-by: Ivan
On Tue, 2014-02-18 at 08:08 -0600, Josh Cartwright wrote:
Hey Ivan-
Nit below.
On Tue, Feb 18, 2014 at 03:21:20PM +0200, Ivan T. Ivanov wrote:
+static struct of_device_id msm_ci_dt_match[] = {
const?
Thanks, will do.
Regards,
Ivan
+ { .compatible = qcom,ci-hdrc, },
+
Hi Hayes,
2014-02-18 5:49 GMT-08:00 Hayes Wang hayesw...@realtek.com:
PHY reset is necessary after some hw settings. However, it would
cause the linking down, and so does the set_speed function. Combine
the PHY reset with set_speed function. That could reduce the frequency
of linking down and
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 02/18/2014 05:44 PM, Felipe Balbi wrote:
On Tue, Feb 18, 2014 at 05:41:12PM +0100, Daniel Mack wrote:
On 02/18/2014 05:33 PM, Felipe Balbi wrote:
On Wed, Feb 05, 2014 at 03:34:18PM +0100, Daniel Mack wrote:
schedule_delayed_work() takes the
On Tue, Feb 18, 2014 at 06:22:57PM +0100, Daniel Mack wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 02/18/2014 05:44 PM, Felipe Balbi wrote:
On Tue, Feb 18, 2014 at 05:41:12PM +0100, Daniel Mack wrote:
On 02/18/2014 05:33 PM, Felipe Balbi wrote:
On Wed, Feb 05, 2014 at
On Tue, Feb 18, 2014 at 11:03:35AM -0600, Felipe Balbi wrote:
On Tue, Feb 18, 2014 at 08:59:11AM -0800, Greg KH wrote:
On Tue, Feb 18, 2014 at 10:20:54AM -0600, Felipe Balbi wrote:
On Fri, Jan 17, 2014 at 10:22:35AM +0100, Markus Pargmann wrote:
debugfs files to show the contents of
On 02/18/2014 08:14 PM, Ivan T. Ivanov wrote:
From: Ivan T. Ivanov iiva...@mm-sol.com
Allows controller to be specified via device tree.
Pass PHY phandle specified in DT to core driver.
Signed-off-by: Ivan T. Ivanov iiva...@mm-sol.com
---
drivers/usb/chipidea/ci_hdrc_msm.c | 23
On Tue, Feb 18, 2014 at 07:55:13AM -0800, Kevin Cernekee wrote:
On Tue, Feb 18, 2014 at 7:12 AM, Felipe Balbi ba...@ti.com wrote:
On Mon, Feb 17, 2014 at 04:43:11PM -0800, Amit Uttamchandani wrote:
I was looking at the changes for net2280.c and saw your name come up in
a few of the more
Hi,
On Tue, Feb 18, 2014 at 09:30:21AM -0800, Greg KH wrote:
+static int dsps_musb_dbg_init(struct musb *musb, struct dsps_glue
*glue)
+{
+ struct dentry *root;
+ struct dentry *file;
+ char buf[128];
+
+ sprintf(buf, %s.dsps,
Hi Sarah,
On Mon, Jan 06, 2014 at 07:02:19PM -0800, David Cohen wrote:
When CONFIG_PCI and CONFIG_PM are not selected, xhci.c gets this
warning:
drivers/usb/host/xhci.c:409:13: warning: ‘xhci_msix_sync_irqs’ defined
but not used [-Wunused-function]
It happens due to lack of __maybe_unused
On Tue, Feb 18, 2014 at 10:00:30AM -0800, David Cohen wrote:
Hi Sarah,
On Mon, Jan 06, 2014 at 07:02:19PM -0800, David Cohen wrote:
When CONFIG_PCI and CONFIG_PM are not selected, xhci.c gets this
warning:
drivers/usb/host/xhci.c:409:13: warning: ‘xhci_msix_sync_irqs’ defined
but not
Sorry for the delay in reviewing this. It helps me if you don't make the
patch in-reply-to a months old thread. :) I'll take a look at this
shortly.
Sarah Sharp
On Tue, Feb 18, 2014 at 09:42:39AM +0200, Denis Turischev wrote:
The same issue like with Panther Point chipsets. If the USB ports
On Tue, Feb 18, 2014 at 12:47:41PM -0600, Felipe Balbi wrote:
On Tue, Feb 18, 2014 at 10:00:30AM -0800, David Cohen wrote:
Hi Sarah,
On Mon, Jan 06, 2014 at 07:02:19PM -0800, David Cohen wrote:
When CONFIG_PCI and CONFIG_PM are not selected, xhci.c gets this
warning:
Hi,
On Sun, Feb 16, 2014 at 12:42 AM, Alan Stern st...@rowland.harvard.edu wrote:
That's true when it is invoked from userspace. It can also be invoked
directly by a kernel driver; in that case no file is needed.
I managed to get it working but I think what I did is rather flawed.
The
On Tue, Feb 11, 2014 at 07:29:40PM -0800, Julius Werner wrote:
I believe I am seeing a polling livelock scenario as described by Julius.
Julius was talking about what happens when the host controller itself
gets reset (and therefore remembers nothing about any device) whereas
the device
On Tue, 18 Feb 2014, [windows-1252] Michal �mucr wrote:
On 17.2.2014 20:48, Alan Stern wrote:
This isn't a USB problem.
Hello,
I'm experiencing very similar messages after every disconnection of USB
soundcard (snd-usb-audio module). During searching for other similar
occurrences of
On Tue, 18 Feb 2014, Stanislaw Gruszka wrote:
On Mon, Feb 17, 2014 at 09:48:14AM -0500, Alan Stern wrote:
On Mon, 17 Feb 2014, Stanislaw Gruszka wrote:
There is threadirqs kenel boot option which allow to force interrupt
routines to be performed as thread.
USB irq routines use
Hi Thomas,
Thomas Petazzoni thomas.petazz...@free-electrons.com writes:
Dear Arnaud Ebalard,
On Sat, 18 Jan 2014 22:49:17 +0100, Arnaud Ebalard wrote:
I started suspecting the introduction of MSI support in Marvell PCIe
host controller driver (FL1009 is on the PCIe bus) and compiled a
a
Hi,
+ Paul as he might have better details about the Synopsys core host-side
implementation
On Tue, Feb 18, 2014 at 12:42:53PM -0800, Sarah Sharp wrote:
On Tue, Feb 11, 2014 at 07:29:40PM -0800, Julius Werner wrote:
I believe I am seeing a polling livelock scenario as described by
Dear Arnaud Ebalard,
On Tue, 18 Feb 2014 21:54:31 +0100, Arnaud Ebalard wrote:
I finally got some idea: your kernel 3.13-rc7 lacks a very important
fix we did in the irqchip driver MSI handling. You really need to have
Hi,
On Tue, Feb 18, 2014 at 03:14:25PM -0600, Dinh Nguyen wrote:
On Fri, 2014-02-14 at 22:50 +, Paul Zimmerman wrote:
From: Jingoo Han [mailto:jg1@samsung.com]
Sent: Thursday, February 13, 2014 11:46 PM
On Friday, February 14, 2014 2:27 PM, Peter Chen wrote:
On Thu, Feb
On Tue, Feb 18, 2014 at 07:31:55PM +0100, Sergei Shtylyov wrote:
On 02/18/2014 08:14 PM, Ivan T. Ivanov wrote:
From: Ivan T. Ivanov iiva...@mm-sol.com
Allows controller to be specified via device tree.
Pass PHY phandle specified in DT to core driver.
Signed-off-by: Ivan T. Ivanov
From: Dinh Nguyen [mailto:dingu...@altera.com]
Sent: Tuesday, February 18, 2014 1:14 PM
On Fri, 2014-02-14 at 22:50 +, Paul Zimmerman wrote:
From: Jingoo Han [mailto:jg1@samsung.com]
Sent: Thursday, February 13, 2014 11:46 PM
On Friday, February 14, 2014 2:27 PM, Peter
From: Hayes Wang hayesw...@realtek.com
Date: Tue, 18 Feb 2014 21:48:57 +0800
Change some flows or behavior to improve the efficiency or make the
code readable. Besides, support WOL and runtime suspend.
Series applied, but as Florian mentioned you should seriously consider
converting this
On 18. 2. 2014 21:51, Alan Stern wrote:
On Tue, 18 Feb 2014, [windows-1252] Michal �mucr wrote:
On 17.2.2014 20:48, Alan Stern wrote:
This isn't a USB problem.
Hello,
I'm experiencing very similar messages after every disconnection of USB
soundcard (snd-usb-audio module). During searching
From: Felipe Balbi [mailto:ba...@ti.com]
Sent: Tuesday, February 18, 2014 1:05 PM
Hi,
+ Paul as he might have better details about the Synopsys core host-side
implementation
On Tue, Feb 18, 2014 at 12:42:53PM -0800, Sarah Sharp wrote:
On Tue, Feb 11, 2014 at 07:29:40PM -0800, Julius
Hello.
On 02/17/2014 09:53 PM, Krzysztof Opasiak wrote:
Strings in current verison of library are hardcoded to
US English. Functions which set strings are generic and
allow to set other languages, but internal library structures
should be update only when setting US English strings.
Hello.
On 02/19/2014 02:07 AM, Sergei Shtylyov wrote:
Strings in current verison of library are hardcoded to
US English. Functions which set strings are generic and
allow to set other languages, but internal library structures
should be update only when setting US English strings.
Hello.
On 02/17/2014 09:53 PM, Krzysztof Opasiak wrote:
Add usbg_get_config_name() and usbg_get_config_name_len()
to avoid direct config structure members access.
Signed-off-by: Krzysztof Opasiak k.opas...@samsung.com
---
include/usbg/usbg.h | 16
src/usbg.c |
Hello.
On 02/19/2014 12:34 AM, Courtney Cavin wrote:
From: Ivan T. Ivanov iiva...@mm-sol.com
Allows controller to be specified via device tree.
Pass PHY phandle specified in DT to core driver.
Signed-off-by: Ivan T. Ivanov iiva...@mm-sol.com
---
drivers/usb/chipidea/ci_hdrc_msm.c |
Julius, are you sure the Synopsys host will actually power off the
ports? The Intel hosts need some special ACPI methods, so I'm not sure
if Dan's issue with ports after power on could even be seen on the
Synopsys host.
The Synopsys issue (as I remember it, please correct me if I'm wrong)
On Tue, Feb 18, 2014 at 2:40 PM, Julius Werner jwer...@chromium.org wrote:
Can you take a look at it, and see if it would address your issue? I
think it will catch the case where we transition from SS.Inactive -
RxDetect - Polling.
I don't think that's targeting the same problem. Hans seems
On Mon, 17 Feb 2014, Stanislaw Gruszka wrote:
There is threadirqs kenel boot option which allow to force interrupt
routines to be performed as thread.
USB irq routines use spin_lock(*hci-lock) variant without disabling
interrupts, what is perfectly fine, but that can cause deadlock when
We don't need to change hub_port_debounce() right away... that was
just an additional suggestion to make things more efficient for
SuperSpeed devices in general. I think for now (in order to solve
Dan's problem), it would be best if he just calls hub_port_debounce()
in
On Tue, Feb 18, 2014 at 10:49:24AM -0600, Felipe Balbi wrote:
On Fri, Dec 27, 2013 at 10:38:30AM +0800, Peter Chen wrote:
Add fsl,imx6q-usbphy for imx6dq and imx6dl, add
fsl,imx6sl-usbphy for imx6sl.
Signed-off-by: Peter Chen peter.c...@freescale.com
anybody from DT to give me an
On Wed, Feb 19, 2014 at 09:14:58AM +0800, Bo Shen wrote:
Hi Felipe Balbi,
On 02/19/2014 12:19 AM, Felipe Balbi wrote:
On Fri, Jan 17, 2014 at 10:59:25AM +0800, Bo Shen wrote:
When the SoC is earlier than sama5d3 SoC, which have the same number
endpoints and DMAs. However for sama5d3 SoC, it
On Wed, Feb 19, 2014 at 09:12:49AM +0800, Shawn Guo wrote:
On Tue, Feb 18, 2014 at 10:49:24AM -0600, Felipe Balbi wrote:
On Fri, Dec 27, 2013 at 10:38:30AM +0800, Peter Chen wrote:
Add fsl,imx6q-usbphy for imx6dq and imx6dl, add
fsl,imx6sl-usbphy for imx6sl.
Signed-off-by: Peter
On Tue, Feb 18, 2014 at 3:39 PM, Julius Werner jwer...@chromium.org wrote:
We don't need to change hub_port_debounce() right away... that was
just an additional suggestion to make things more efficient for
SuperSpeed devices in general. I think for now (in order to solve
Dan's problem), it
On 02/19/2014 09:22 AM, Felipe Balbi wrote:
On Wed, Feb 19, 2014 at 09:14:58AM +0800, Bo Shen wrote:
Hi Felipe Balbi,
On 02/19/2014 12:19 AM, Felipe Balbi wrote:
On Fri, Jan 17, 2014 at 10:59:25AM +0800, Bo Shen wrote:
When the SoC is earlier than sama5d3 SoC, which have the same number
On Wed, Feb 19, 2014 at 08:44:12AM +0800, Peter Chen wrote:
On Tue, Feb 18, 2014 at 07:24:19PM -0600, Felipe Balbi wrote:
On Wed, Feb 19, 2014 at 09:12:49AM +0800, Shawn Guo wrote:
On Tue, Feb 18, 2014 at 10:49:24AM -0600, Felipe Balbi wrote:
On Fri, Dec 27, 2013 at 10:38:30AM +0800,
In sama5d3 SoC, there are 16 endpoints, which is different with
earlier SoCs (only have 7 endpoints). The USBA_NR_ENDPOINTS micro
is not suitable for sama5d3. So, get the endpoints number through
the udc-num_ep, which get from platform data for non-dt kernel,
or parse from dt node.
Signed-off-by:
Florian Fainelli [mailto:f.faine...@gmail.com]
Sent: Wednesday, February 19, 2014 1:19 AM
To: Hayes Wang
Cc: netdev; nic_s...@realtek.com;
linux-ker...@vger.kernel.org; linux-usb
Subject: Re: [PATCH net-next 07/14] r8152: combine PHY reset
with set_speed
[...]
+static void
1 - 100 of 122 matches
Mail list logo
