On Tue, May 14, 2024 at 01:54:52AM +0200, Peter J. Philipp wrote:
> Hi,
>
> A few more people responded, I'm falling behind on priorities though because
Hi again,
https://mainrechner.de/Buecher2024/batch1.png
Here is the first batch that will be mailed out on Friday at the latest.
On Tue, May 14, 2024 at 01:58:18PM -0400, F Bax wrote:
> Recently installed 7.5 amd64 in qemu VM (8G RAM) under proxmox. See this
> message many times on console and dmesg.
>
> viomb0 unable to allocate 256 physmem pages, error 12
>
> What does this mean? How to resolve this issue?
Hi,
When
On Tue, May 14, 2024 at 01:54:52AM +0200, Peter J. Philipp wrote:
> Hi,
>
> A few more people responded, I'm falling behind on priorities though because
> I am very close to cracking AES-128 I have reduced it to a complexity of
> 2 ^ 64. However I have some old code to get th
On Sat, May 11, 2024 at 10:35:38AM +0200, Peter J. Philipp wrote:
> On Sat, May 11, 2024 at 08:45:45AM +0200, Peter J. Philipp wrote:
> > Contact me privately if you would like a batch with what you like. I'll
> > make note on that webpage of what's given away. Offe
On Sat, May 11, 2024 at 05:55:11PM +, Lucretia wrote:
> I would love some used books but don't have 1000???. I will have $750 around
> beginning of June if you want to send me a Paypal invoice to my Apple email:
> openbsd.g...@icloud.com I was going to buy my second laptop but books are
>
On Sat, May 11, 2024 at 08:45:45AM +0200, Peter J. Philipp wrote:
> If you want some used books, I'm moving across the Atlantic soon and I can't
> take my books along. In total the new value of them was 8000 odd EUR. If
> I send three books to kyrgystan and it's under 2 kg, I checked
On Sat, May 11, 2024 at 08:45:45AM +0200, Peter J. Philipp wrote:
> Contact me privately if you would like a batch with what you like. I'll
> make note on that webpage of what's given away. Offer ends July 1st of this
> year.
Three books have already been given away. They went t
On Sat, May 11, 2024 at 02:52:32AM +, Lucretia wrote:
> Book recommendations are most welcome!
>
> Lux of the Agony
> 720077 Bishkek
> Altyn Kazyk 31A
> KYRGYZSTAN
> l...@openbsdgirl.com
If you want some used books, I'm moving across the Atlantic soon and I can't
take my books along. In
Hi Lux,
In my opinion if you want to study networking load up on every distfile in
/usr/ports/net as these tools will help you. ipcalc is valuable even pros
use it because doing CIDR and netmasks in your head is possible but not
practical in all scenarios.
That said you should look into
uld,
more often.
--
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
https://bsdly.blogspot.com/ https://www.bsdly.net/ https://www.nuug.no/
"Remember to set the evil bit on all malicious network traffic"
delilah spamd[29949]: 85.152.224.147: disconnected after 42673 seconds.
happened immediately before the incidents in the log files
such as /var/log/messages (and any other possibly relevant log files).
--
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
https://bsdly.blogspot.com/ https://www.bsdly.net/ https://www.nuug.no/
"Remember
On Mon, May 06, 2024 at 10:51:05PM +0200, Peter J. Philipp wrote:
> The title says "AES-256 is as safe as AES-128" for a translation.
Just an update: with this method the key can be recovered with a complexity
of 2^96, working on a complexity of 2^64 now. Please help if you have f
The title says "AES-256 is as safe as AES-128" for a translation.
Hi,
Dear everyone who I contacted and haven't contacted so far. I have run
a test program against a practiced attack against AES-256. While trying
to restore the key with just 1 guessed t0 value (I have almost given up)
But in
On 2024 May 06 (Mon) at 10:14:21 -0400 (-0400), Benjamin Raskin wrote:
:Hello, all;
:
:I've been having some issues getting bgpd to announce IPv6 routes,
...
:
:bgpd(8) is configued to advertise all connected and static routes,
:however bgpd(8) only advertises routes that are connected to the
countered Just Work),
configure that, then run fw_update. Once the firmware is in place, the rest
should be straightforward.
Good luck!
- Peter
--
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
https://bsdly.blogspot.com/ https://www.bsdly.net/ https://www.nuug.no/
"R
recent OpenBSD release", with some desktop/laptop oriented tweaks I had found
useful myself. Some of those tweaks may still apply, but some are likely to
be outdated or just plain wrong to start with. But perhaps an updated version
would be useful to somebody?
--
Peter N. M. Hansteen, member of
On Mon, Apr 29, 2024 at 05:35:49PM +0200, Janne Johansson wrote:
> > Any help is much appreciated. The ER-8 right now idles a lot anyhow and
> > I plan on using it for the 8 RJ45 ports.
>
> I run some Pro 8s in a small rack where I have ripped out the internal
> fan of the edgerouters, and then
Hi,
What sort of things can I do to keep an edgerouter 8 cool that doesn't have
fans? I'm ready to pull the fans out of it because they have a certain
harmonic that makes me physically ill. But I like the octeon!
So short of throwing it out I'm thinking of pulling the plug (on the fans).
Would
Has anyone tried this? I read that Microsoft has Hyper-V for ARM.
I've been running OpenBSD on amd64 hardware in Hyper-V for a while. I suspect
there wouldn't be endian issues since arm64 and amd64 are both LE, is there any
other concerns?
I'm inquiring because mainly I know I have my sights
On Sun, Apr 28, 2024 at 08:01:58PM +0200, Jan Stary wrote:
> > hw.sensors.acpibat0.volt0=15.40 VDC (voltage)
> > hw.sensors.acpibat0.volt1=14.29 VDC (current voltage)
> > hw.sensors.acpibat0.current0=0.69 A (rate)
I think he got it from here (from dc):
14.29 0.69 * p
9.86
This is explained
I found a dmesg! Thank you!
https://marc.info/?l=openbsd-bugs=171430467412856=2
No other needed!
-pjp
On Sat, Apr 27, 2024 at 12:29:43PM +0330, Jadi Mirmirani wrote:
> Try:
> https://dmesgd.nycbug.org/index.cgi?do=index=OpenBSD
> Its an awesome list of people submitting their `dmesg`s whils using OpenBSD.
> Have not checked if the ones you mentioned are there or not. But its
> frequently
Hi,
I'm looking for a dmesg of an arm64 laptop, the time I think has come to
mothball the apple macbook pro from early 2015 (my old laptop called spica),
I could put a new battery in it but the 80 EUR is not worth it anymore. I'm
also gearing up for job interviews overseas in the summer where I
Hi!
I've had some problems with dump(8) lately. A 800 GB SSD partition on a
raspberry pi 4b (via USB) that is 50% filled had trouble with dump. I don't
know why this could be, but it used to work.
Here is my backup script that I used to run in my "nodump" chflagged
/home/pjp/Backup directory.
significant risk that new users would encounter this in the wild, with a
probability large enough that it would be useful to add a note about this to
say https://www.openbsd.org/faq/faq4.html#bsd.rd somewhere?
--
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
https://bsdly.
t even from some other unixlike like
Linux will do).
--
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
https://bsdly.blogspot.com/ https://www.bsdly.net/ https://www.nuug.no/
"Remember to set the evil bit on all malicious network traffic"
delilah spamd[29949]:
On Thu, Apr 25, 2024 at 12:45:29AM -0300, Gustavo Rios wrote:
> Hi folks!
>
> What is the maximum file size in OpenBSD ?
>
> Thanks a lot.
>
> --
> The lion and the tiger may be more powerful, but the wolves do not perform
> in the circus
There is this comment in /usr/include/ufs/ffs/fs.h:
versions: LibreSSL 3.9.0, LZO 2.10
xxx us=890289 OpenSSL: error:14FFF18E:SSL
routines:(UNKNOWN)SSL_internal:ca md too
weak::/usr/src/lib/libssl/ssl_rsa.c:394:
It works fine on FreeBSD (14) and linux (OpenSSL 3.x)
Best regards,
Peter
ttpd.conf
this can not ever be over emphasised or over amplified.
On OpenBSD, you can expect man pages to be complete and informative and
to contain references to other useful resources.
Anyone learning OpenBSD or with OpenBSD should be using 'apropos' and 'man'
quite intensively.
- Peter
--
P
- essentially Markov chains / glorified autocorrect - are
> increasingly known for 'hallucinations' and confidently making false claims.
Here's the story of my asking it to write a PF.conf -
https://nxdomain.no/~peter/chatgpt_writes_pf.conf.html
or with nicer formatting and trackers
https://bs
On Tue, Apr 16, 2024 at 06:08:13PM +0200, Peter J. Philipp wrote:
> On Tue, Apr 16, 2024 at 04:35:23PM +0100, Polarian wrote:
>
> > Does anyone have any suggestions on what I could try?
> OpenBSD 7.5-current (GENERIC.MP) #11: Thu Apr 11 17:03:03 MDT 2024
> dera...@arm64.op
On Tue, Apr 16, 2024 at 04:35:23PM +0100, Polarian wrote:
> Does anyone have any suggestions on what I could try?
Hi, I too have a RPI 4b that is currently my workstation. Near the time of
release I was building my own base and packages, which was right near the
times of the ld.so changes,
ion
is supposed to do, competent people here might offer some advice
on how to make things work properly.
Until that happens, I for one will simply ignore anything from that
source.
--
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
https://bsdly.blogspot.com/ ht
not parse host specification
This sounds to me like those interfaces either do not exist or
have not been correctly configured.
Are those interfaces configured, as in do they have IP addresses?
the output of ifconfig igc1 and ifconfig igc2 will show you.
--
Peter N. M. Hansteen, member of the
interfaces separately.
The other option - if your network layout is such that it makes
sense to treat them to the same rule criteria - would be to make an
interface group with both interfaces as members, then use the
interface group name in your rules.
--
Peter N. M. Hansteen, member
bought a little while back, the options were somewhat non-intuitive:
"The option turned out to live in the BIOS' Advanced menu, labeled
VMD setup menu, where you set the Enable VMD controller option
to Disabled."
which made the drive visible to OpenBSD.
(the fuller st
Hi,
In this mail: https://marc.info/?l=openbsd-misc=170759396512738=2
I asked people what sip proxy they use. And got feedback, thank you!
However after a short code-reading of the software mentioned I became
distraught and want to do my own. I have worked on this saturday and
sunday and it's
port $client_out
- that way you will actually use the macro. But the macro sitll references
the invalid service nportntp (you probably want ntp instead), and I would
think that the services "446, cvspserver, 2628, 5999, 8000, 8080" are unlikely
to be useful unless you *know* you need to pass t
On Sat, Apr 13, 2024 at 09:32:48PM +0200, Karel Lucas wrote:
> What should I add then, considering my PF ruleset? To be honest, all of this
> is very unclear to me at the moment, so any help is appreciated.
How about:
pass out inet proto { tcp, udp } from any to any port { 53, 853 } keep state
to use the "client_out" macro for a pass rule and forgot it?
As Janne hints at here, your pass criteria are too narrow to be practical for
the needs you appear to have.
Not an uncommon problem while learning to write rulesets. And of course I
have written about that too -
https://home.
.$icmp_types" and
> "...$client_out"). I am assuming "log log" on the last rule is a typo,
> and it is actually "log out".
Those are as far as I can tell correct observations. There appears to be
no rule allowing traffic other than the selected icm
t with a
bare environment with only essentials like $HOME defined and no
~/.terminfo directory (as opposed to an empty one), do the odd messages
still appear?
--
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
https://bsdly.blogspot.com/ https://www.bsdly.net/ https://www.
a few steps back, start from the basics and add only the
things you know you need.
--
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
https://bsdly.blogspot.com/ https://www.bsdly.net/ https://www.nuug.no/
"Remember to set the evil bit on all malicious network traffic"
On Wed, Apr 10, 2024 at 11:01:18PM +0200, Peter N. M. Hansteen wrote:
> Another gentle introduction can be found in the latest PF tutorial,
> the slides for the AsiaBSDCon 2024 version can be found as
> https://nxdomain.no/~peter/pf_asiabsdcon2024.pdf which in turn has
> reference
roduction can be found in the latest PF tutorial,
the slides for the AsiaBSDCon 2024 version can be found as
https://nxdomain.no/~peter/pf_asiabsdcon2024.pdf which in turn has
references to various useful resources.
And of course, this mailing list tends to be receptive to reasonably
formulated questions
Hi,
I have found that my Mango Pi is very jittery, also when I reboot it there
is probably garble on the UART link causing it to fall into u-boot prompt.
I have tried:
env set bootdelay 0
env set bootdelay -1
saveenv
and reset
but it doesn't seem to work. Any garble will still cause a break
ctually read the advice offered by contributors to this thread.
--
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
https://bsdly.blogspot.com/ https://www.bsdly.net/ https://www.nuug.no/
"Remember to set the evil bit on all malicious network traffic"
delilah spamd[
and
> 46, causing the pf lines not to be loaded.
macro names are case sensitive, to wit
peter@kapet:~$ cat martians
Martians = "{ 127.0.0.0/8, 192.168.0.0/16, 172.16.0.0/12, \
10.0.0.0/8, 169.254, 0.0/16, 192.0.2.0/24, \
0.0.0.0/8, 240.0.0.0/4 }"
bloc
On Tue, Apr 09, 2024 at 08:39:08AM +0200, Karel Lucas wrote:
> Hi all,
>
> For the first time I tested my new firewall with ping, and it is blocked. I
> don't know what the reason is, you can find the information below. I have a
> network with only regular clients, so no servers. I'm still using
in $martians (which I anyway would recommend converting
into a table), and your block referencing $martians comes after the pass rules
that would have let icmp through. With no previous matching quick, last match
applies.
- Peter
--
Peter N. M. Hansteen, member of the first RFC 1149 impl
Hi,
I lost the thread in my mutt, so I'm hoping marc.info will adjust it in there,
the thread is here: https://marc.info/?l=openbsd-misc=171059471410619=2
Thank you Gabor Nagy! Here is my RPI zero 2W(H) with working wifi in hostap
mode, and hopefully working GPIO's I'm going to be studying
mode by default. Fortunately
it was possible to choose the other options and have the device turn up
as a regular NMVe device:
https://nxdomain.no/~peter/blog_wild_wild_world_of_windows.html (or with
incrementally nicer formatting at the cost of G's trackers,
https://bsdly.blogspot.com/2021/07/the-impe
RAID0 is called that because zero is what you'll recover if you lose a
disk. This is amazingly dangerous, and you're going to have a bad time.
Do a backup, then restore from backup.
On 2024 Apr 06 (Sat) at 22:43:05 +0200 (+0200), Kirill A. Korinsky wrote:
:Folks,
:
:I'm looking for a way to
OpenBSD natively supports IPv6 addressing via static configuration and
SLAAC. We do not have a DHCPv6 client in base, so currently you have to
use a package for that.
On 2024 Apr 06 (Sat) at 13:01:31 -0400 (-0400), Sonic wrote:
:That works - I didn't realize I needed to install a package to
east some
information.
- P
--
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
https://bsdly.blogspot.com/ https://www.bsdly.net/ https://www.nuug.no/
"Remember to set the evil bit on all malicious network traffic"
delilah spamd[29949]: 85.152.224.147: disconnected after 42673 seconds.
On Tue, Apr 02, 2024 at 11:20:52PM +0500, ofthecentury wrote:
> I'll take a look at those locations, thanks. It might just be arp
> that's the authenticated client data store from the point of view of
> the wireless interface.
If you really want to debug what's going on I suggest you put another
On Tue, Apr 02, 2024 at 10:31:59PM +0500, ofthecentury wrote:
> Where does OpenBSD keep a list of all wireless clients that have
> been authenticated? Not the dhcpd leases list. Actual wireless stations
> that have authenticated to an interface running in hostap mode. Not arp
> cache, is it?
>
>
h like a situation where the base system and packages
are out seriously of sync AND your user is et up with a default shell from
packages (I am guessing bash).
The solution would likely be to log in as root, run pkg_add -D snap -u
to get the latest snapshot packages, then try to log in as yo
@mastodon.social
>From a tweet of mine from 2011, but evergreen:
I DEMAND TO KNOW WHY YOUR GROUP OF OVERWORKED VOLUNTEERS, WHICH
I AM NOT A MEMBER OF, IS NOT PURSUING MY PERSONAL GRIEVANCE.
Mar 28, 2024, 12:22 PM
--
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
ht
On 3/30/24 14:18, Peter J. Philipp wrote:
PS: I'll probably do this next week I have a need for different
hardware in my 9U rackmount cabinet. And one particular one needs
powercycles (and possibly console) as well. It's the mango pi, which
is currently in panic mode most likely or it's
on the list, the Cc:s are not necessary and in fact
a bit annoying)
--
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
https://bsdly.blogspot.com/ https://www.bsdly.net/ https://www.nuug.no/
"Remember to set the evil bit on all malicious network traffic"
delil
On Sat, Mar 30, 2024 at 05:44:32PM +0500, ofthecentury wrote:
> On Sat, Mar 30, 2024 at 5:29 PM Peter N. M. Hansteen wrote:
> >
> > why?
>
> I got "disassoc"s events in the log.
disassociations can happen for a number of different reasons. The event
should log a
On 3/16/24 14:32, Peter J. Philipp wrote:
On 3/16/24 14:10, Gabor Nagy wrote:
hello,
maybe?
Running OpenBSD on Raspberry Pi Zero 2 W
https://www.tumfatig.net/2023/running-openbsd-on-raspberry-pi-zero-2-w/
This is incredible! I have a zero 2W somewhere, though I put it into
a GPI case
em logs.
That said, it would have been a lot easier to help you out if
you had provided your actual configuration (with any secrets
shrouded as appropriate) and at least a dmesg.
Keep in mind that wireless connections are in fact quite brittle
in nature and subject to all sorts of radio interfere
Dan,
You are being inappropriate and obnoxious. Stop it.
This is unaccepable behaviour.
rvice, systemd."
Enjoy!
--
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
https://bsdly.blogspot.com/ https://www.bsdly.net/ https://www.nuug.no/
"Remember to set the evil bit on all malicious network traffic"
delilah spamd[29949]: 85.152.224.147: disconnected after 42673 seconds.
out putting in some extra effort.
- Peter
--
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
https://bsdly.blogspot.com/ https://www.bsdly.net/ https://www.nuug.no/
"Remember to set the evil bit on all malicious network traffic"
delilah spamd[29949]: 85.152.224.
The reason why ls -l faulted has been found and is being worked on.
The next step is trying to delete the files.
Running as root
rm fails with Operation not permitted
so does chmod and chown end chattr
Any ideas on how to get rid of the files
There was a mistake while signing these packages, you want the set
signed 2024-03-22 or later.
ftp.hostserver.de and the other 2nd level mirrors most certainly has
those, and the other mirrors should get them over time.
On 2024 Mar 26 (Tue) at 11:22:08 + (+), void wrote:
:Hello,
:
[CC'ed to Kettenis in case he doesn't read misc@]
On 3/24/24 20:43, Peter J. Philipp wrote:
On 3/24/24 14:09, Slava Voronzoff wrote:
On Fri, 22 Mar 2024 04:28:15 +0100
"Peter J. Philipp" wrote:
No I didn't try a newer OBSD, I will soon though. :-) And no I didn't
chang
l do the integrity checking.
If you *want* to have a script that wraps both actions into one, that's fine.
But I would have wanted to make life easier by sticking to the tools that
are available in a default install.
--
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
https:
On 3/24/24 14:09, Slava Voronzoff wrote:
On Fri, 22 Mar 2024 04:28:15 +0100
"Peter J. Philipp" wrote:
No I didn't try a newer OBSD, I will soon though. :-) And no I didn't
change anything in the DTB.
While this is an EXTREMELY dirty attempt to add it can you try somehow t
pflog does not monitor the RADIO. They are not Layer 3 packets, and are
not seen by pf.
On 2024 Mar 22 (Fri) at 16:25:08 +0500 (+0500), ofthecentury wrote:
:Thanks. This does work on an interface, but not on -r /var/log/pflog?
:
:On Fri, Mar 22, 2024 at 3:54 PM Stefan Sperling wrote:
:>
:> On
privately, but for the public record:
https://mainrechner.de/dot.config.txt
This is the .config I used with the u-boot.
No I didn't try a newer OBSD, I will soon though. :-) And no I didn't
change anything in the DTB.
Best Regards,
-pjp
Peter J. Philipp írta 2024. márc.. 21, Cs-n 08:50 ó
here is some datasheets and other documents that
I collected over the last year or so: https://mainrechner.de/riscv.html
Best Regards,
-pjp
On 21.03.24 08:50, Peter J. Philipp wrote:
Hi,
If anyone is interested in helping or just plain interested, here is my
prep work documented. I've been
step we need to figure out if NUTTX actually has drivers
for this SoC and that they work. If not, we'll have to consider
another approach.
Best Regards,
-pjp
--
*** I used to sign with -peter, but noticed it's not unique, -pjp may come up
in the future, so please adjust for that ***
Hi,
If anyone is interested in helping or just plain interested, here is my
prep work documented. I've been on it sparingly since beginning of March.
I don't know how much time I want to invest in this but we'll see...
https://github.com/pbug44/openbsd-src/tree/Ox64
The Ox64 is a 8 dollar SoC
I was just notified that two different obvious pr0n
spam sources followed my account.
--
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
https://bsdly.blogspot.com/ https://www.bsdly.net/ https://www.nuug.no/
"Remember to set the evil bit on all malicious network tr
r=Red Hat
hw.product=KVM
hw.version=RHEL 7.6.0 PC (i440FX + PIIX, 1996)
hw.uuid=d0ce8c03-1393-0b4b-99bf-ce5fb8fd6c0e
hw.physmem=1056813056
hw.usermem=1056796672
hw.ncpufound=1
hw.allowpowerdown=1
hw.smt=0
hw.ncpuonline=1
hw.power=1
hw.ucomnames=
--
*** I used to sign with -peter, but noticed it's not unique, -pjp may come up
in the future, so please adjust for that ***
On 3/16/24 14:10, Gabor Nagy wrote:
hello,
maybe?
Running OpenBSD on Raspberry Pi Zero 2 W
https://www.tumfatig.net/2023/running-openbsd-on-raspberry-pi-zero-2-w/
This is incredible! I have a zero 2W somewhere, though I put it into a
GPI case. The drawback with the GPI case is it will not
On Fri, Mar 15, 2024 at 06:38:14PM +0100, Peter N. M. Hansteen wrote:
> least the content of your configuration files -- /etc/hostmhame.* and the
> output
that should of course have been /etc/hostname.* but would be obvious?
--
Peter N. M. Hansteen, member of the first RFC 1149 implemen
see at
least the content of your configuration files -- /etc/hostmhame.* and the output
of ifconfig for the relevant interfaces (if need be with stuff like IP
addresses
and passwords masked).
--
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
https://bsdly.blogspot.com/ http
t6' settings in there.
- Peter
--
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
https://bsdly.blogspot.com/ https://www.bsdly.net/ https://www.nuug.no/
"Remember to set the evil bit on all malicious network traffic"
delilah spamd[29949]: 85.152.224.147: disconnected after 42673 seconds.
et_property]: could not
> set sound-card to '%s', trying the default card instead"
> wrapper-2.0: vfprintf %s NULL in "%s: muted"
>
> Nothing else to show up in /var/log/messages. Is there
> a more detailed log?
>
> How do I gather info about this from
the issue
a lot more.
As somebody (sorry, I forget who) posted earlier, https://idownvotedbecau.se/
is actually
worth reading.
--
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
https://bsdly.blogspot.com/ https://www.bsdly.net/ https://www.nuug.no/
"Remember to set the
uld be my next step.
--
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
https://bsdly.blogspot.com/ https://www.bsdly.net/ https://www.nuug.no/
"Remember to set the evil bit on all malicious network traffic"
delilah spamd[29949]: 85.152.224.147: disconnected after 42673 seconds.
iling, more likely than not you would be seeing messages
in system log files or possibly even in dmesg output. Totally silent failures
are not very common.
--
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
https://bsdly.blogspot.com/ https://www.bsdly.net/ https://www.nuug.no
On 3/9/24 17:07, Laura Smith wrote:
Hi
I've got a fresh install of 7.4 on a new box and am seeing a very weird problem.
If I enter "dmesg" I get a few lines of output and then it hangs and my ssh
connection gets dropped. I ran syspatch, rebooted and the problem persists.
Example:
# dmesg
Yes, we are at a stage of development where snapshots look similar to a
-release. (Note, these snapshots are not actually the release)
For now, you want to run pkg_add with -Dsnap, so "pkg_add -Dsnap -u" or
"pkg_add -Dsnap colorls".
On 2024 Mar 09 (Sat) at 12:11:51 +0300 (+0300), Dmitry
ot for a separate set
of eyes.
- P
--
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
https://bsdly.blogspot.com/ https://www.bsdly.net/ https://www.nuug.no/
"Remember to set the evil bit on all malicious network traffic"
delilah spamd[29949]: 85.152.224.147: disconnected after 42673 seconds.
EuroBSDCon 2024, Dublin, September 2024
The Call for Talk and Presentation proposals for EuroBSDCon 2024 is now open.
EuroBSDCon is the European technical conference for users and developers of
BSD-based systems. The conference is scheduled to take place September 19-22
2024 in Dublin, Ireland
Just been to upgrade a rather old system I keep OpenBSD on for fun all
the way up from 6.9, and found bytemark no longer seem to be hosting
any OpenBSD content.
Fortunately there's a couple of archives with pretty much every
OpenBSD release ever, so sysupgrade is currently rather busy
PK
your message,
but there appears to be a www/sogo port, so "doas pkg_add sogo" and proceed
to any configuration steps the docs specify should be a possible way forward.
- Peter
--
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
https://bsdly.blogspot.com/ https:
on the authoritative server end, where you
can't do anything about something like a MITM anyhow. Donald Knuth and
other books using algorithmic approaches may be good reading for this.
Best Regards,
-peter
ts were blocked.
The rest of your questions can be answered relatively easily by familiarizing
yourself with the tools
at hand, such as the tcpdump you have already encountered. Do read up on how
syslog classfies messages
and how to report which levels and so forth.
Some of the things you mention may require spe
be able to do sips:// or tls'ed sip. It should register
or be registerable to an already existing AVM sip server. And it should
be security conscious.
Thanks for feedback,
-peter
--
Over thirty years experience on UNIX-like Operating Systems starting with QNX.
= res_xmpp.so
load = res_pjsip_session.so
load = res_rtp_multicast.so
load = res_ael_share.so
load = res_pjsip_pubsub.so
load = res_stasis_recording.so
load = res_pjsip_outbound_publish.so
To the beginning of modules.conf asterisk loaded without missing symbols.
-Original Message-
From: Peter
're not normal library deps for the main binary, all dlopen()'d from the
relevant path.
> On February 5, 2024 10:54:38 AM MST, Peter Fraser wrote:
>>I should also add the libraries re on my system, and nm says they
>>contain the simples I don't know why they are not loading.
may
It seems that your audio is connected in an.interesting way:
"808622A8" at acpi0 not configured
I guess we'll need a driver to support that.
Please use sendbug(1) to make a report, and make sure it includes the
acpidump from the system.
-peter
On 2024 Feb 05 (Mon) at 20:2
missing library
On 2024-02-04, Peter Fraser wrote:
> Asterisk 20.5.2 works for me two different amd64 computers that I upgraded
> from 7.3 amd64 to 7.4.
...
> [Feb 4 10:33:11] NOTICE[107524]: loader.c:2405 load_modules: 280 modules
> will be loaded.
> asterisk:/usr/local/lib/a
1 - 100 of 2784 matches
Mail list logo