Citeren ahouse-support supp...@ahouse.mine.nu:
There simply is no such functionality, or the driver can not read
these values because of nesovmestimoti / oschibki? Maybe a fix?
Read my reply again. The *UPS* doesn't report battery charge, so the
only thing NUT can do is guesstimate this
Citeren ahouse-support supp...@ahouse.mine.nu:
# ./nut start
Network UPS Tools - UPS driver controller 2.4.1
Network UPS Tools - Megatec/Q1 protocol serial driver 1.51 (2.4.1)
Supported UPS detected with megatec protocol
Vendor information read in 1 tries
Battery runtime will not be calculated
Citeren briceboulang...@hotmail.com briceboulang...@hotmail.com:
Here's the message when I try to stop upsdrv daemon (/etc/init.d/upsdrv stop)
* Stopping UPS drivers ...
Network UPS Tools - UPS driver controller 2.4.3
Can't open /var/lib/nut/usbhid-ups-auto.pid: No such file or directory
Citeren Charles Lepple clep...@gmail.com:
The get_belkin_reply() function looks fragile to me. Three seconds should be
enough to fill the buffer, but if you put a few upsdebugx() calls
around ser_get_buf_len(), it should be evident whether the read is
timing out, or if there is a problem
Citeren James bjloc...@lockie.ca:
Since you don't mention the make and model of the UPS in question, it
will probably be impossible to help you any further.
Ah, standard USBHID (CyberPower CP550SLG).
This is a (very) basic entry level UPS. I doubt it is worth the
effort/money to invest in
Citeren Niels Kristian Jensen n...@internetgruppen.dk:
n...@grisen:~$ sudo su -
r...@grisen:~# cd /var/run/nut/
r...@grisen:/var/run/nut# ls -al
total 8
drwxrwx--- 2 root nut 100 2010-11-12 14:31 .
drwxr-xr-x 16 root root 640 2010-11-19 09:58 ..
-rw-r--r-- 1 nut nut5 2010-10-22 22:41
Citeren Hristo Iliev hsil...@gmail.com:
I'm trying to setup my Mustek 600 with USB (no serial ports on my computer)
on Gentoo. The configuration I use is:
[Mustek]
driver = megatec_usb
port = auto
desc = Power Mustek 600 USB
The 'megatec_usb' driver is obsolete, please switch to
Citeren Rémi Lavergne remi.laver...@uni-tuebingen.de:
/etc/nut/upsmon.conf :
RUN_AS_USER nut
MINSUPPLIES 1
SHUTDOWNCMD /sbin/shutdown -h +0
POLLFREQ 5
POLLFREQALERT 5
HOSTSYNC 15
DEADTIME 15
POWERDOWNFLAG /etc/killpower
RBWARNTIME 43200
FINALDELAY 5
MONITOR d...@localhost 1 upsmon master
Citeren Charles Lepple clep...@gmail.com:
Whats next coach? I'm going blind staring at this, and probably missing
something obvious, like hacking on the 52-* udev script some more to change
some perms? FWIW, changing all the 'ATTR' to 'ATTRS' shut it up
completely. This was udev complaining
Citeren Thomas H. George li...@tomgeorge.info:
I still have a problem, however. I read upssched.txt.gz, edited
upsmon.con, found upssched in /sbin, and started to edit upssched.conf
but there is no file upssched.pipe in my system.
The upssched.pipe is only present when there are timers
Citeren Thomas H. George li...@tomgeorge.info:
Can upsmon be set to shutdown the system immediately upon sensing a
power failure?
Yes.
I just installed nut on my Debian Squeeze system, connected it to a
Cyperpower ups and edited /etc/nut/ups.conf and upsmon.conf. On system
reboot upsd and
Citeren Jon Bendtsen jbendt...@laerdal.dk:
Please run the following command
/path/to/usbhid-ups -DDD -a upsname Smart-UPS1500RM.log 21
Are you interested in the same output from APC Smart-UPS RM 3000VA ?
dkserver:/etc/nut# udevadm info --name=/dev/bus/usb/001/004
--attribute-walk |
Citeren Niels Kristian Jensen n...@internetgruppen.dk:
(many more resource errors follow)
The last lines are telling you what is going on:
4.547868 libusb_get_report: error sending control message: Device
or resource busy
4.547886 Can't retrieve Report 06: Device or resource
Citeren Pierre Boullier diatech...@wanadoo.fr:
First, I've tried with a standard ups.conf. Error message : device
is (or not yet) supported.
That's not unusual.
Second attempt, including productid in ups.conf. Error message : no
matching HID UPD found.
This only works if you either
Citeren Javier Miqueleiz jav...@miqueleiz.com:
This unit uses a different HID path than the stardard one for sending a
load.on.delay command. As the driver (usbhid-ups) can't find this command,
it has to revert to rebooting the UPS. The HID paths involved are:
-
Citeren Charles Lepple clep...@gmail.com:
We don't maintain such a list, due in part to the tendency of
manufacturers to drastically change the firmware of an UPS without
changing the model name.
Another reason is that over time drivers may be extended with
additional functions (for
Citeren Ritchie rot...@gmx.de:
I can understand the reason for it, what about a special request.
Does a
APC Back-UPS ES 700VA 230V
support this function ?
Which function? Which interface?
Best regards, Arjen
--
Please keep list traffic on the list (off-list replies will be rejected)
Citeren Ritchie rot...@gmx.de:
Which function?
The shutdown.return xxx command
(Shutdown with a delay and switch of the load power of the UPS and
switch on the power of the UPS after power returns)
This doesn't work reliable at this time. APC doesn't follow the USB
HID PDC
Citeren Ritchie rot...@gmx.de:
I am trying to get a APC Back-UPS CS 500 running on my QNAP 419P Nas.
[...]
I am missing the command shutdown.return' ?
Does the ups not support this command ?
It might support it, but not in the USB HID PDC paths that we
recognize. If this is supported by
Citeren Gene Heskett gene.hesk...@gmail.com:
However, giving ./configure the --with-all option fails, no libgd exists on
pclos. I have a libgd2, and just installed some libgda3 libgda4 devel
stuffs for them, plus all the pluigins for libdga4.
You need 'libgd'. On my system, this is provided
Citeren Mark Ruys mark.r...@in2sports.net:
How to prevent these messages? Is something wrong (probably). How to
debug it.
Thanks,
Mark
CentOS 5.4
nut-2.2.0-7.el5
nut-client-2.2.0-7.el5
Upgrade NUT to the latest version first. Loads of changes have been
made to the usbhid-ups driver
Citeren Arnaud Quette arnaud.que...@free.fr:
please subscribe to the nut user mailing list (
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser)
and post the output of /path/to/usbhid-ups -D -a
your_ups_name_in_ups.conf
Forget the above, this is not a HID PDC device. Currently
Citeren Arnaud Quette aquette@gmail.com:
the only thing I can see (apart from changing for a more feature full unit)
is to lower the trigger level from 30 % to 20 % so that these tests do no
result in a shutdown. If the software is still NUT, you can simply change
the low battery level
Citeren Erik H. venefyx...@gmail.com:
When connecting one of our CyberPower PR2200E UPS's (via USB), I received the
message that this UPS is not supported (yet), and the advice to run the
driver with -x productid=0105
Which driver? Which version of NUT? What does 'lsusb -vvv' (run as root)
Citeren Arnaud Quette arnaudque...@eaton.com:
battery.charge: 71
What does the above read after 24 hours charging? Is it still below 100%?
output.voltage: 9812.0
This can't be right... :-)
@Niels: can you post the first 20 seconds worth of output from
/path/to/usbhid-ups -DDD -a
Citeren Richard richard-...@rain4us.net:
Have I misconfigured something or missed something in the docs? I'm
getting the UPS statistics fine.
First try doing the same through the 'upsrw' and 'upscmd'
(commandline) commands. The user credentials should be as configured
in 'upsd.users'.
Citeren Charles Lepple clep...@gmail.com:
One thing we might consider logging at a slightly higher level is
whether the ACCESS-DENIED error originated from NUT (while checking
the user lists), or from TCP wrappers. I know we wouldn't want to send
that back over the socket, but at the moment, I
Citeren Roger Price ro...@rogerprice.org:
My upsmon.conf MONITOR line is
MONITOR eaton-66...@localhost 1 upsmaster sekret master
and upsd.users says
[upsmaster]
password = sekret
upsmon master
so the user and password match. Is this enough to be appropriately
privileged,
Citeren Roger Price ro...@rogerprice.org:
I added [::1] to the upsd line in /etc/hosts.allow
upsd : 10.0.0/24, localhost, LOCAL, 127.0.0.1, [::1] : ALLOW
and then ran command rcupsd restart to restart NUT.
The latter is a waste of effort. This is not how tcp-wrappers works.
[...]
The
Citeren Glen Ogilvie n...@linuxsolutions.co.nz:
I've attached the output of lsusb -v and usbhid-ups -DDD -a ups -x
vendorid=0001 -x productid= -x explore
Although the output of 'usbhid-ups' shows something which vaguely
looks like a report descriptor, I don't think it is valid/used.
Citeren Roberto Parras roberto.par...@gmail.com:
Unfortunately I cannot configure settings using upsset.cgi, but I can
issue some commands (turn off the load, start tests of battery, and so
on). The upsstats declares that this model is not supported.
Your UPS doesn't have settings that can be
Citeren Arjen de Korte nut+us...@de-korte.org:
Unfortunately I cannot configure settings using upsset.cgi, but I can
issue some commands (turn off the load, start tests of battery, and so
on). The upsstats declares that this model is not supported.
Your UPS doesn't have settings that can
Citeren Greg Oliver oliver.g...@gmail.com:
These patches allow this device to function in nut..
diff --git a/trunk/drivers/tripplite-hid.c b/new/drivers/tripplite-hid.c
index c36da98..13c 100644
--- a/trunk/drivers/tripplite-hid.c
+++ b/new/drivers/tripplite-hid.c
@@ -71,6 +71,8 @@ static
Citeren Brother Railgun of Reason ala...@caerllewys.net:
This resulte in a drivers/Makefile containing the following definition:
LIBNETSNMP_LDFLAGS = -R../lib -L/usr/sfw/lib -lnetsnmp -lgen -lpkcs11
-lkstat -lelf -lm -ldl -lnsl -lsocket -ladm
This isn't a Makefile bug. The above flags are
Citeren RC cool...@gmail.com:
Powering-down the unit, whether with upsdrvctl or upscmd will not obey the
specified delay in offdelay, or ups.delay.shutdown. Instead, a message about
power off in 20s displays on the LCD, and indeed it does power off.
Unfortunately, when coming back on, only one
Citeren Rob Donovan hikerman2005-...@yahoo.com:
1) syslog errors every 20+ minutes or so like : Aug 7 10:21:03 ben
usbhid-ups[3321]: libusb_get_string: error sending control message:
Broken pipe
Not a cause of concern. It is a way of telling that the UPS is
currently not able to
Citeren Michelle Konzack linux4miche...@tamay-dogan.net:
It seems, yu have the same problem as me with the APC 3000RM rackmount
which I use with 8 EXB to get over 6 hour of autonomy.
NUT does not recogniser the 8 extension packs.
Same here. If the UPS doesn't report the presence of the
Citeren Tanstaafl tansta...@libertytrek.org:
I may be inheriting some Cyberpower UPSs, and would be interested in
particulars...
Which driver did you use? Serial or USB?
The powerpanel driver is serial only, although the usbhid-ups driver
does support some Cyberpower devices through USB.
Citeren dur...@mgtsciences.com:
I have all working and the test shutdown using 'upsmon -c fsd' worked.
Also I get appropriate messages on console when I pull power and restore.
But I want to *see* it work by removing power, but I don't want to wait.
Why?
You still need to find out if the UPS
Citeren Manuel Wolfshant wo...@nobugconsulting.ro:
[...]In the past people have requested that the UPS should wait
until the hard disks have been stopped (spun down), fearing that
killing power to them abruptly might damage them. For that reason,
we delay switching off the UPS. I'm not
Citeren dur...@mgtsciences.com:
I have read the shutdown.txt in the docs directory. It says that after
upsmon calls the shutdown command init takes over. This I understand
clearly. However, step 8.
8. init then runs your shutdown script. This checks for the
POWERDOWNFLAG, finds it, and
Citeren dur...@mgtsciences.com:
I understand now. Not sure why a UPS has a 'shutdown' feature, but, it
can't be shutdown before the machine has completed its shutdown.
It's not the command to shutdown that's important. Most drivers will
at the same time also tell the UPS to switch back on
Citeren Michelle Wright michelle.wri...@gmail.com:
$ sudo /lib/nut/usbhid-ups -DDD -a maxfun
Network UPS Tools - Generic HID driver 0.34 (2.4.3)
USB communication driver 0.31
[...]
0.341940 Report[get]: (3 bytes) = 1d 8b 00
0.341960 Path: UPS.PowerSummary.Voltage, Type: Feature,
Citeren Douglas Parsons d...@parsonsemail.com:
So just for my understanding, the NUT ups driver doesn't care if the USB to
serial converter is built into the ups or an external unit?
Indeed. The only thing that is important is whether or not the USB to
serial converter is supported by the
Citeren Wagner wagner...@gmail.com:
Network UPS Tools 2.2.2 - Megatec protocol driver 1.5.14 [megatec]
Carlos Rodrigues (c) 2003-2008
debug level is '6'
Starting UPS detection process...
Asking for UPS status [Q1]...
Q1 = FAILED [timeout]
Asking for UPS status [Q1]...
Q1 = FAILED [timeout]
Citeren Sébastien Lefevre lefevre@gmail.com:
I have communication issues between my station and my old Pulsar EX10 UPS,
(U-Talk) connected by RS232, when using v2.4.1 of nut-server.
[...]
Does anyone know about it ?
I think it's a software bug but I'm waiting for yours opinions.
This
Citeren Jim Wilenius b...@booru.net:
Question: Should there not be more entries, for example battery time
or similar?
No. The reason why is mentioned in 'man 8 blazer', which also tells
you what you can do about this.
Anyway, if the above looks right, you can add the FSP brand EP 650
Citeren Dimitri Ognibene dimitri.ognib...@gmail.com:
the output of sudo /lib/nut/blazer_usb -u root -DDD -a ap1000 is
Checking device (0665/5161) (008/004)
- VendorID: 0665
- ProductID: 5161
- Manufacturer: Cypress Semiconductor
- Product: USB to Serial
- Serial Number: unknown
- Bus: 008
Citeren Arjen de Korte nut+us...@de-korte.org:
Somehow reading the report descriptor fails, either due to a problem
in the UPS or in the libusb library (assuming you ran the above
command as root and no other application was using the UPS at the
time). I have no idea how to locate which
Citeren Greg Terkanian gr...@crystalcomputer.com:
I've compiled the 2.4.3 source with the proper options (through
trial and error). I get the same initial error.
I told you that before. The device is still not autodetected, but at
least the productid override now works.
When I run the
Citeren Александр d...@btsig.ru:
May be, the problem is that this SNMP board report not everything
specified in RFC for UPS: for example, battery temperature is not
reported.
Does nut stop after first failed request (no such variable) and
switch to next scheme?
No. It checks for a
Citeren Greg Terkanian gr...@crystalcomputer.com:
My installation is from an Ubuntu (Jaunty) package (2.4.1). This is
their latest. I'm supposing you're going to recommend I install
from source.
Of course. We don't release new versions without reason.
I'd rather not. Is there a patch
Citeren Daniel Allen d...@wre-llc.com:
APC back-ups model bn1250g
I used the apt-get update apt-get install nut and the ver that
it said it downloaded nut 2.2.2-6.4debian:5.0.4/stable
Nag the folks at Debian for a newer version or build one yourself. The
version you're using now is really
Citeren Daniel Allen d...@wre-llc.com:
I am using NUT(network ups tools) ver. 2.2.2 to monitor my
ns1200(model bn1250g)
This version is (too) old. Nevertheless, in order to give just about
any help, we need to know which driver you are using right now (and
possibly a little more info on
Citeren Terry terrypowl...@yahoo.co.uk:
I am confused as to what the command needs re :failed to detach kernel driver
from USB device: No such file or directory. Can someone please
explain as I have
no experience setting up a ups. Thanks.
Please re-run with debug level 5:
richcomm_usb
Citeren Arjen de Korte nut+us...@de-korte.org:
Please re-run with debug level 5:
richcomm_usb - -u root -a Kebo
Correction:
richcomm_usb -D -u root -a Kebo
Sorry about that.
Best regards, Arjen
--
Please keep list traffic on the list
Citeren ricman ric...@neomedia.it:
here are a couple of logs: log 1 and 2 are pretty similar and command stopped
after a couple of seconds saying No supported UPS detected; log 3
went on for about 30 seconds and i stopped it using control+c
Your UPS can't make up its little mind what it
Citeren Arnaud Quette aquette@gmail.com:
once more, try blazer with NUT 2.4.3, and tell us back how it works.
Try 'blazer_ser' and make sure to read 'man 8 blazer' before asking for help.
Best regards, Arjen
--
Please keep list traffic on the list
Citeren ricman ric...@neomedia.it:
i think maybe it's the second one since upsc shows
ups.delay.shutdown: 30
ups.delay.start: 180
ups.firmware: JP00097G
ups.load: 10
ups.mfg:
ups.model:
ups.productid:
ups.status: OL
ups.temperature: 30.0
ups.type: offline / line interactive
ups.vendorid:
---BeginMessage---
I am trying to configure BNT-800AP with USB port.
[r...@localhost ups]# service upsd start
NUT: Запускаються драйвери моделі UPS: Network UPS Tools - UPS driver
controller 2.4.1
Network UPS Tools - PowerCom protocol UPS driver 0.12 (2.4.1)
data receiving error (validation
Citeren Holla holla@gmail.com:
tej nut-monitor-1.1 # upsc Numeric
battery.charge: nan ===
battery.lowbatt: 25
battery.runtime: 0
This is probably due to some broken integer dividing, resulting in loss of
precision. Just fixed in the trunk.
Yes, I checked the trunk and it
Citeren Holla holla@gmail.com:
[...]
Is this all that needs to be done for an unspported UPS ?
This is enough to add it to the list of supported devices. You may
wish to make sure that shutting down also works by running 'upsmon -c
fsd' on the system that is designated as master for
Citeren Charlie Garrison garri...@zeta.org.au:
I tried inlining the config.log but message was rejected due to
size. It's attached as gzip instead.
We prefer not to inline logfiles. Not only because of size, but also
because in many cases the formatting is lost (which can be a pain if
Citeren Charlie Garrison garri...@zeta.org.au:
What can I do to troubleshoot this problem (assuming it should work
to begin with)?
We need to know where the staleness warning is coming from first
(driver, server or client). Run the server in debug mode for a while
to see what it reports:
Citeren Charlie Garrison garri...@zeta.org.au:
And I've found more info while testing which hopefully is a clue. If
I start the driver with either of these commands:
$ sudo /usr/local/ups/bin/upsdrvctl start
$ sudo /usr/local/ups/bin/bcmxcp_usb -a powerware5115
Then I get the 'data stale'
Citeren Roger Price ro...@rogerprice.org:
Pessimist: Shut down quickly as soon as power fails. When power
comes back, restart the server, but be ready to stop again as soon
as the power fails again. Hope to be able to stop as often as the
power fails.
Since I live in a region with
Citeren Arnaud Quette arnaud.que...@free.fr:
The ups is connected with a USB cable but it reports a temperature of 300
degredes.
Oops.
Can I send you guys any debug info so this can be fixed in later releases ?
sure. please, send me the output of upsc.
Looking at the value, we seem to
Citeren Terry Powling terrypowl...@yahoo.co.uk:
How do I resolve the libusb issue with write access, as chmod is
reset on reboot and after failure of driver.
This is a permissions problem, the first thing to try is if running
the driver in debug mode as root helps:
Citeren Yury V. Zaytsev y...@shurup.com:
configure:7803: checking for libhal Callouts path
configure:7814: result: /usr/lib64/hal
Shockingly, line 7814 is
# For Debian
HAL_CALLOUTS_PATH=${libdir}/hal
{ $as_echo
Citeren Yury V. Zaytsev y...@shurup.com:
--with-gd-libs=LDFLAGS linker flags for the gd library
${LDFLAGS} != ${LIBS}
Would you please elaborate?
The gdlib-config tool has three separate options for finding the
include and linker flags and for the libraries. We don't keep a
separate
Citeren Yury V. Zaytsev y...@shurup.com:
So apparently Debian line takes precedence over the Redhat line (which
turns out to be useless).
Not at all. On Debian the HAL_CALLOUTS_PATH is set by pkg-config. The check
if (test -d ${libdir}/hal); then
always fails, because at the time
Citeren Arjen de Korte nut+us...@de-korte.org:
So on a 32-bit system, you should run ./configure with
--libdir=/usr/lib --libexecdir=/usr/lib/hal
That would be
--libdir=/usr/lib --libexecdir=/usr/libexec
for a RedHat system.
and on a 64-bit system, it should
Citeren Yury V. Zaytsev y...@shurup.com:
However, another problem popped up:
http://paste.ubuntu.com/383680/
which is caused by this line here:
/bin/sh ../libtool --tag=CC --mode=link gcc -I../include
-I/usr/kerberos/include -I/usr/include -O2 -g -pipe -Wall
-Wp,-D_FORTIFY_SOURCE=2
Citeren Yury V. Zaytsev y...@shurup.com:
You didn't read docs/configure.txt nor did you run ./configure
--help.
As surprising as it might seem, I did read ./configure --help, which
says this to be exact:
--with-gd-libs=LDFLAGS linker flags for the gd library
Did you specify any compiler
Citeren Thomas Jensen tom.jen...@digitaltoolbox-inc.com:
server:# /usr/local/ups/bin/powerpanel -DDD -a server
Network UPS Tools - CyberPower text/binary protocol UPS driver 0.25
(2.4.3)
Warning: This is an experimental driver.
Some features may not function correctly.
0.00 debug
Citeren Marc Franquesa marc.franqu...@l3jane.net:
I searched for the newmge-shut driver on the web and in some pages is
considered still in testing and not recommended for production environment.
I tried it on my install and doesn't work well (it reports LB, very low
runtime and it doesn't know
Citeren Thomas Jensen tom.jen...@digitaltoolbox-inc.com:
Are you referring to dmesg output? If so, does it matter in this regards
whether the machine is a virtualized or not. The UPS is connected to a Xen
Dom0 machine.
Don't do any debugging on virtualized systems. You have no idea
Citeren Thomas Jensen tom.jen...@digitaltoolbox-inc.com:
Are you suggesting I temporarily hook up the UPS to a Windows machine,
install the software, and then use PerfMon to analyze the communications?
Yes. If this is not feasible, running it on a Linux box is acceptable
too, but not on a
Citeren Thomas Jensen tom.jen...@digitaltoolbox-inc.com:
server:#
upsdrvctl start
Network UPS Tools - UPS driver controller 2.2.2
Network
UPS Tools - CyberPower driver 1.00 (2.2.2)
Try running the powerpanel driver. The cyberpower driver is no longer
maintained and has no provisions for
Citeren Marc Franquesa m...@l3jane.net:
Basically my questions are:
- Is there any fix for the usbhid-ups disconnects?
Upgrade to nut-2.4.2. All versions prior to that are broken with the
MGE and/or Eaton Ellipse series UPS. The problem is specific to the
Ellipse series and was fixed
Citeren Stephen Fergusson (Smart Computer Systems Ltd)
step...@smartcom.co.nz:
So, I am assuming I do have a permissions error with udev and am
slowing working my way through that, but struggling.
Since running as root fixes them, it's indeed a permissions problem. I
have no idea how to
Citeren Spiros Ioannou siv...@gmail.com:
I attach the file (upsesp2.c) and a sample output.txt I had from my ups. It
queries all parameters in a loop. If no parameter is specified, it tries to
query everything, and when it fails (no response from ups) it marks the
parameter as not supported. In
Citeren Jon Bendtsen jbendt...@laerdal.dk:
I have a R3000XR, and i use bcmxcp using a seriel port out, since i
can not find a USB port on the UPS.
I do have a USB2serial on the host.
I still experience that NUT upsstats.cgi says the UPS battery is at
97%, and some days later at 100%. It
Citeren Arnaud Quette aquette@gmail.com:
I still experience that NUT upsstats.cgi says the UPS battery is at
97%, and some days later at 100%. It happens regularly.
I've logged your issue in the bugs tracker:
Citeren Anton Gorlov stal...@altlinux.ru:
after I starting battery test on my laptop I see in my logs some
error and ups (IPPON Smart Power Pro 1400. usb interface) isn't
monitoring now
Most likely, the UPS isn't listening for the duration of the battery
test. This is behavior we've seen
Citeren Anton Gorlov stal...@altlinux.ru:
Most likely, the UPS isn't listening for the duration of the
battery test. This is behavior we've seen before on other devices.
There is nothing we can do about that. Complain to the UPS vendor.
but after testing complete (~25-40 seconds) driver
Citeren Robert McDonald rmcd1...@gmail.com:
And then I sometimes get message like this relating to the driver:
Feb 13 13:59:18 fin8344 upsmon[15163]: Communications with UPS
a...@localhost lost
Feb 13 13:59:18 fin8344 usbhid-ups[15176]: Got disconnected by another
driver: Device or resource
Citeren Jelle de Jong jelledej...@powercraft.nl:
Can somebody show me an example? I assume it is not expected for every
user to set-up there own custom scripts?
Search the archives. Somewhere late December someone posted an example
for a script that was very similar to what you want.
Best
Citeren Jelle de Jong jelledej...@powercraft.nl:
I have a Debian network server doing monitoring for three UPS devices.
MONITOR r300...@localhost 1 monuser xx master
MONITOR apcup...@localhost 1 monuser x monitor-only
MONITOR apcup...@localhost 1 monuser x monitor-only
Citeren Thomas Gutzler thomas.gutz...@gmail.com:
In your last email you mentioned that you are receiving an EATON Ellipse
UPS yourself. Did you have any luck reproducing any of the errors I
reported? Maybe further insight or suggestions how to tackle this problem?
Yes, I could reproduce the
Citeren Thomas Gutzler thomas.gutz...@gmail.com:
I just updated my local copy of the source to the most recent svn
version and read the svn log for usbhid-ups.c. Seems there was something
happening since last time. I will try out the svn version for a few days
and see how that goes.
I have
Citeren Dennis Stadler dennisstad...@ortwonline.de:
i have an Xanto S1000 USV the Manufactor is ONLINE USV-Systeme AG.
We've had reports in the past that this device worked with the
fentonups driver, which has been replaced by the blazer_ser driver now.
I tried all the buildin drivers,
Citeren Dennis Stadler dennisstad...@ortwonline.de:
I tried all the buildin drivers, also the driver for the driver for the
Generic UPS, nothing worked for this UPS
Which NUT version? Which OS? Which interface?
interface is RS232 (/dev/ttyS0)
Try the megatec driver, by running it with
Citeren Said KÖKÇAM skok...@googlemail.com:
I would like to report that Tuncmatik Newtech Pro 1 KVA
(http://www.tuncmatik.com/en-US/productDetail.asp?RecID=290) works
with nut(2.4.1) blazer_usb, blazer_ser and megatec drivers.
That's good to know. We'll add them to the list of
Citeren Karl Dalen k_d...@hotmail.com:
I have just compiled and installed nut-2.4.1 and I get
the following errors when I try it: There is no difference
if I run it as root or normal user. Any help would be
appreciated.
# usbhid-ups -DDD -a SMART1000LCD
Try running
usbhid-ups -u root
Citeren Thomas Vachon vac...@gamelogic.com:
We use Nexenta which has recently implemented a UPS plugin using NUT
code. The one problem is that it can't look at APCUPSD servers for APC
information. We have a UPS per a rack and a APCUPSD server per a UPS.
Without this functionality, we would
Citeren Thomas Vachon vac...@gamelogic.com:
Basically we have a bunch of Debian boxes running apcupsd which talk to
centralized boxes directly connected to the ups. It acts as a proxy for
all ups information (e.g. on battery, etc). This allows a whole rack of
servers to know what state the
Citeren devz...@web.de:
i currently have an older powerwalker which constantly burns ~15W
for nothing. The transformer inside getting that hot that you don`t
like to touch it and i think 15W out of 50 is a little bit high and
that inside a plastic case looks a little bit dangerous to me,
Citeren Michel Bouissou michel-...@bouissou.net:
- This UPS supporting both serial (mge-shut) or USB (usbhid-ups)
connections/drivers, is there a choice that is better than the other in
Linux ? Do both drivers / connection methods give access to the exact same
parameters / information on the
Citeren Michel Bouissou michel-...@bouissou.net:
Incredible to think about an UPS with communication capabilities
that wouldn't be able to report a measured voltage :-/
There is a reason for that - money. Measuring the input/output voltage
requires a mains separated measuring circuit. The
101 - 200 of 770 matches
Mail list logo