PIL and pass it
to the SuperBuild as system python installation. Is my assumption correct? Or
have I been missing something?
Cheers,
Frank.
From: ParaView [mailto:paraview-boun...@paraview.org] On Behalf Of Albina, Frank
Sent: Mittwoch, 12. Oktober 2016 20:01
To: David E DeMarle
Cc: Del Citto
David,
that’s excellent.
Thanks a lot.
Frank.
From: David E DeMarle [mailto:dave.dema...@kitware.com]
Sent: Mittwoch, 12. Oktober 2016 19:56
To: Albina, Frank
Cc: paraview@paraview.org; Del Citto, Francesco
Subject: Re: [Paraview] Paraview python script: passing images to PIL (python
image
All,
A simple question: my incentive is to manipulate images using PIL in a pvbatch
script. At the time being, I am writing the images to file in PNG format and
reading the file again from disc using PIL. I have found out that the
underlying image writing is performed by the vtkPNGWriter class
Issue being configuration messages.
-Original Message-
From: Ben Boeckel [mailto:ben.boec...@kitware.com]
Sent: Mittwoch, 12. Oktober 2016 15:53
To: Albina, Frank
Cc: Gena Bug; paraview@paraview.org
Subject: Re: [Paraview] ParaView 5.2 Release Candidate 1 available for download
On Wed
All,
I have been having similar issue when compiling ParaView 5.1.2 from source with
QT4 support, which depends on the fontconfig project.
I could get rid of it by setting FONTCONFIG_PATH to /etc/fonts on my system.
HTH.
Frank.
-Original Message-
From: ParaView
Chuck,
thank you very much for the info. This is most useful.
Frank.
From: Chuck Atkins [mailto:chuck.atk...@kitware.com]
Sent: Dienstag, 11. Oktober 2016 21:28
To: Albina, Frank
Subject: Re: [Paraview] Building ParaView v5.1.2 on Linux from source with
support for GPU and SWR.
b)Use
sion.
Is this something which was expected? Or did I miss something when compiling
the source code?
Thank you very much in advance for any feedback.
Cheers,
Frank.
From: ParaView [mailto:paraview-boun...@paraview.org] On Behalf Of Albina, Frank
Sent: Donnerstag, 29. September 2016 13:55
To: C
, with mesa-llvm
and mesa-swr-avx2.
Talk to you soon.
Best regards,
Frank.
From: Chuck Atkins [mailto:chuck.atk...@kitware.com]
Sent: Mittwoch, 28. September 2016 21:18
To: Ben Boeckel
Cc: Albina, Frank; David E DeMarle; Del Citto, Francesco; paraview@paraview.org
Subject: Re: [Paraview] Building
disregard the
questions above.
Thanks a lot in advance.
Regards,
Frank.
-Original Message-
From: Ben Boeckel [mailto:ben.boec...@kitware.com]
Sent: Mittwoch, 28. September 2016 14:45
To: Albina, Frank
Cc: David E DeMarle; Del Citto, Francesco; paraview@paraview.org
Subject: Re: [Paraview]
libraries based on Mesa3D v12.0 and replace the currently
pre-compiled binaries? If so,what are the typical configuration options used in
this case?
Any feedback/comments are most welcome.
Regards,
Frank.
From: Albina, Frank
Sent: Montag, 26. September 2016 15:51
To: 'David E DeMarle'
Cc: paraview
Perfect!
Thanks.
Frank.
From: David E DeMarle [mailto:dave.dema...@kitware.com]
Sent: Montag, 26. September 2016 15:49
To: Albina, Frank
Cc: paraview@paraview.org; Del Citto, Francesco
Subject: Re: [Paraview] Building ParaView v5.1.2 on Linux from source with
support for GPU and SWR.
3.3
a variety of platforms and ParaView
versions. This would be also a good candidate benchmark to check new ParaView
release candidates, I think.
Frank.
From: Benson Muite [mailto:benson_mu...@yahoo.com]
Sent: Montag, 26. September 2016 15:16
To: Albina, Frank; paraview@paraview.org
Cc: Del Citto, Francesco
S
ParaView v5.1.2
from the git repository?
Best regards,
Frank.
From: David E DeMarle [mailto:dave.dema...@kitware.com]
Sent: Montag, 26. September 2016 15:37
To: Albina, Frank
Cc: paraview@paraview.org; Del Citto, Francesco
Subject: Re: [Paraview] Building ParaView v5.1.2 on Linux from source
. September 2016 11:30
To: Albina, Frank; paraview@paraview.org
Cc: Del Citto, Francesco
Subject: Re: [Paraview] Paraview v5.1.2: SurfaceLIC & software rendering issues
Both would be great if possible.
On 09/26/2016 12:22 PM, Albina, Frank wrote:
Benson,
do you need the data and the example
Benson,
do you need the data and the example code, or only the example code?
Frank.
From: Benson Muite [mailto:benson_mu...@yahoo.com]
Sent: Montag, 26. September 2016 11:17
To: Albina, Frank; paraview@paraview.org
Cc: Del Citto, Francesco
Subject: Re: [Paraview] Paraview v5.1.2: SurfaceLIC
Dear all,
after having downloaded last week the latest ParaView release (v5.1.2) for
Linux, I have found out that the binary version has the following folder
structure in lib/paraview-5.1:
mesa-llvm
|-- libGL.so -> libGL.so.1
|-- libGL.so.1 -> libGL.so.1.5
|-- libGL.so.1.5
|-- libOSMesa.so ->
Dear all,
I have downloaded from the paraview.org the latest binaries for Linux of
ParaView v5.1.2. My main purpose is to make use of ParaView with software
rendering in a clustered environment without GPU and, as such, I have been
going through my small benchmark on a generic F1 car.
This
to
installation and repeat my benchmarks, the outcome of which I will be feeding
back of course.
Cheers,
Frank Albina
From: Chuck Atkins [mailto:chuck.atk...@kitware.com]
Sent: Freitag, 8. Januar 2016 20:41
To: Utkarsh Ayachit
Cc: Albina, Frank; paraview@paraview.org
Subject: Re: [Paraview] Paraview v5.0.0
Dear all!
I recompiled Paraview-v5.0.0-rc2 from scratch using OpenMPI v1.6.5 and GCC
v4.7.2 on my workstation.
The QT & Python versions are the default system versions and are resp. 4.8.4 &
2.7.3.
After successful compilation and installation, I start 8 parallel pvserver
instances with:
same build, since I am starting both
server and client from the same command line on the (Linux) workstation, hence
I am using the same environement.
HTH,
Frank.
From: Cory Quammen [mailto:cory.quam...@kitware.com]
Sent: Freitag, 18. Dezember 2015 15:08
To: Albina, Frank
Cc: paraview@paraview
To: Albina, Frank
Cc: paraview@paraview.org
Subject: Re: [Paraview] Paraview v5.0.0-rc2 with OpenGL2 backend failing to
start in parallel
Frank,
Thanks for the info on where you got the code. Maybe there's a problem with the
source packaging? I'll try out that download and see if I can
today to perform additional tests which are part of
the way we use ParaView on our compute cluster. I'll keep you posted on that .
Talk to you soon.
Frank.
-Original Message-
From: Utkarsh Ayachit [mailto:utkarsh.ayac...@kitware.com]
Sent: Donnerstag, 17. Dezember 2015 19:05
To: Albina
bina, Frank
Cc: Ken Martin; paraview@paraview.org
Subject: Re: [Paraview] Paraview v5.0.0-RC1 with OpenGL2 backend not running
using OSMESA v10.5.5
On Thu, Dec 10, 2015 at 17:20:35 +0100, Albina, Frank wrote:
> Thank you for the reply. My idea was to run PV-5.0.0-RC1 in parallel
> on o
Hi all!
First of all, thanks for all the effort spent on porting the rendering engine
to support the OpenGL2 backend by default on PV 5.0.0. Early tests with the
binary from the download page shows a massive improvement over the PV 4.1 to
4.3 versions in terms of rendering time. I have
hish Chaudhary [mailto:aashish.chaudh...@kitware.com]
Sent: Donnerstag, 10. Dezember 2015 15:55
To: Ken Martin
Cc: Albina, Frank; paraview@paraview.org
Subject: Re: [Paraview] Paraview v5.0.0-RC1 with OpenGL2 backend not running
using OSMESA v10.5.5
Hi Frank,
In addition to what Ken said, If you sw
.
-Original Message-
From: Ben Boeckel [mailto:ben.boec...@kitware.com]
Sent: Donnerstag, 10. Dezember 2015 17:07
To: Ken Martin
Cc: Albina, Frank; paraview@paraview.org
Subject: Re: [Paraview] Paraview v5.0.0-RC1 with OpenGL2 backend not running
using OSMESA v10.5.5
On Thu, Dec 10, 2015 at 09:18:44
IMHO, the issue is that you need to tell the NVIDIA driver that a screen will
be connected at any time to the GPU, but you need to supply the driver with the
screen data via a custom EDID file, like so in your xorg.conf file:
Section Device
Identifier Device0
[...]
Option
with
rep.GetPropertyValue(Property name).
Cheers,
Frank.
-Original Message-
From: Sebastien Jourdain [mailto:sebastien.jourd...@kitware.com]
Sent: Donnerstag, 26. Juli 2012 16:32
To: Albina, Frank
Cc: paraview@paraview.org
Subject: Re: [Paraview] SurfaceLIC and python interface
Hi Frank
Dear All!
I am trying to run the SurfaceLIC representation under pvbatch. From the python
trace tool under the GUI, I could find the following output which helps me
setting the LIC intensity and LICStepSize:
RenderView1 = GetRenderView()
DataRepresentation1 = Show()
Hi!
Forgot to tell that the PV version is 3.14.1.
Cheers,
Frank.
From: paraview-boun...@paraview.org [mailto:paraview-boun...@paraview.org] On
Behalf Of Albina, Frank
Sent: Donnerstag, 26. Juli 2012 10:26
To: paraview@paraview.org
Subject: [Paraview] SurfaceLIC and python interface
Dear All
[mailto:sebastien.jourd...@kitware.com]
Sent: Donnerstag, 26. Juli 2012 14:04
To: Albina, Frank
Cc: paraview@paraview.org
Subject: Re: [Paraview] SurfaceLIC and python interface
Hi Frank,
I think you need to use the C++ API as the representation was already
wrapped based on another type of representation
Can you try: Filters - Extract Surface, then Filters-Feature Edges and see if
this is what you want?
HTH.
Frank.
-Original Message-
From: paraview-boun...@paraview.org [mailto:paraview-boun...@paraview.org] On
Behalf Of Nico Schlömer
Sent: Dienstag, 29. Mai 2012 15:51
To:
Dear ParaView users developers,
I am trying to reduce the time spent in performing generic 3D surface
rendering. A lot has been achieved by using ParaView driven by python scripting
already but actually I'd like to achieve more. At the time being, all rendering
is performed using CPU
Hi Lorenzo!
Maybe you'd better off with reading the OpenFOAM solution with the built-in
OpenFOAM reader. Just create in your case directory an empty OF.foam file and
you can start reading the solution by opening this file from the GUI.
Hope this helps.
Frank.
-Original Message-
From:
Dear All!
Is there a way to get the paraview version from within a python script? I
could get the underlying VTK version with
paraview.vtk.vtkVersion.GetVTKVersion(), but I could not manage to achieve the
same with the paraview version, although it pops up to the output when
performing: from
100%. I will keep you in touch in case
I can manage another successful build on a different computer.
HTH.
Cheers,
Frank.
-Original Message-
From: Kevin H. Hobbs [mailto:hob...@ohio.edu]
Sent: Montag, 25. April 2011 15:42
To: Albina, Frank
Cc: David Partyka; paraview@paraview.org
It does not work with OSMesa. Tried it already. But it shall work with a proper
GPU. If I recall it correctly, there was some information flying around in this
forum about which type of GPU is needed.
-Original Message-
From: paraview-boun...@paraview.org
I think this has to do with the variable PARAVIEW_INSTALL_THIRD_PARTY_LIBRARIES
which is set to ON by default. You could try to switch it off and see if it
fixes the issue.
Cheers,
Frank.
-Original Message-
From: paraview-boun...@paraview.org [mailto:paraview-boun...@paraview.org] On
for the script anyway. I sure will make good use of it.
Cheers,
Frank.
-Original Message-
From: Kevin H. Hobbs [mailto:hob...@ohio.edu]
Sent: Dienstag, 19. April 2011 19:50
To: Albina, Frank
Cc: David Partyka; paraview@paraview.org
Subject: Re: [Paraview] Paraview v3.10.1/0 segmentation fault
for the effort.
Cheers,
Frank.
-Original Message-
From: Kevin H. Hobbs [mailto:hob...@ohio.edu]
Sent: Mittwoch, 20. April 2011 16:44
To: Albina, Frank
Cc: David Partyka; paraview@paraview.org
Subject: Re: [Paraview] Paraview v3.10.1/0 segmentation fault with MPI and MESA
support
.
Please, let me know if you need more information.
Cheers,
Frank.
-Original Message-
From: Kevin H. Hobbs [mailto:hob...@ohio.edu]
Sent: Montag, 18. April 2011 20:59
To: David Partyka
Cc: Albina, Frank; paraview@paraview.org
Subject: Re: [Paraview] Paraview v3.10.1/0 segmentation fault
08:10
To: Albina, Frank
Cc: Kevin H. Hobbs; David Partyka; paraview@paraview.org
Subject: Re: [Paraview] Paraview v3.10.1/0 segmentation fault with MPI and MESA
support on.
Try messa 7.7.1
We use paraview3.10.0 and messa7.7.1 with mpi support. It does work.
Arjun
差出人 : Albina, Frank frank.alb
42 matches
Mail list logo
