Hi
I have read through the SMPP v3.4 spec, the Kannel user guide and some other
PDFs from the SMS Forum but I am still a little in the dark about this
field.
Please correct me where I am wrong:
It seems that the data_coding field is made up of 2 distinct sections.
Firstly, coding scheme, bits 3
Hi guys.
Does anyone have an ideas to my question below?
Thanks,
On Thu, Jan 13, 2011 at 11:35 AM, brett skinner
tatty.dishcl...@gmail.comwrote:
Hi
I was looking through the logs and saw that Kannel sends concatenated SMSs
using UDH in the Short Message fields. From reading the SMPP spec I
Hi
I was looking through the logs and saw that Kannel sends concatenated SMSs
using UDH in the Short Message fields. From reading the SMPP spec I was
under the impression that the same thing could be achieved by using
sar_total_segments and sar_segment_seqnum. Did I misinterpret the spec or
does
Hi
We have had a couple of scenarios where a smsc that we are sending to
suddenly goes offline. We don't want to flood our bearerbox with SMS so we
only give it up to 400. When the smsc goes down we continue to try send to
that bind until the bearerbox queue is at about 400 then it stops and we
- Original Message - From: brett skinner
To: Users
Sent: Monday, October 11, 2010 10:45 AM
Subject: Rerouting SMSs
Hi
We have had a couple of scenarios where a smsc that we are sending to
suddenly goes offline. We don't want to flood our bearerbox with SMS so we
only give it up to 400. When
- Original Message - From: brett skinner
To: Users
Sent: Monday, October 11, 2010 11:13 AM
Subject: Re: Rerouting SMSs
Hi Nikos
Yes, you are correct. Terribly sorry for leaving out that vital piece of
information.
Would this also work if we had the following situation:
Bind
--
From: brett skinner tatty.dishcl...@gmail.com
Date: Fri, Sep 17, 2010 at 2:16 PM
Subject: Re: Weird binding issue that causes queues to build up.
To: Users users@kannel.org
Hi
We have experienced this problem again. A couple of our binds to one
particular smsc (the rest were okay) had
that there is another workaround for this by defining two smsc
groups one for Tx and the other for Rx.
Regards
--
Benaiad
On Thu, Sep 23, 2010 at 11:21 AM, brett skinner tatty.dishcl...@gmail.com
wrote:
Hi guys
We have just hit this issue AGAIN this morning. Can ANYONE please give
some
Regards
--
Abdulmnem Benaiad
Almontaha CTO
www.almontaha.ly
Tripoli-Libya
On Thu, Sep 23, 2010 at 2:58 PM, brett skinner
tatty.dishcl...@gmail.comwrote:
Hi
We are using transmitter and receiver because apparently there are
performance issues when using transceiver due to both
, 2010 at 3:42 PM, brett skinner tatty.dishcl...@gmail.comwrote:
Thanks Alvaro for your response.
I am running a build from SVN from about a 2 weeks ago. I am bit weary of
turning the loggers to debug mode because we are doing a lot of traffic and
debug mode is very verbose we will eat through
Hi everyone
Just wondering if anyone has had a chance to look at this yet?
Thanks and appreciate any help.
-- Forwarded message --
From: brett skinner tatty.dishcl...@gmail.com
Date: Tue, Sep 7, 2010 at 10:47 AM
Subject: Weird binding issue that causes queues to build up
On Thu, Sep 9, 2010 at 2:42 AM, brett skinner tatty.dishcl...@gmail.com
wrote:
Hi everyone
Just wondering if anyone has had a chance to look at this yet?
Thanks and appreciate any help.
-- Forwarded message --
From: brett skinner tatty.dishcl...@gmail.com
Date: Tue, Sep
Hi
We are experiencing a rather weird occasional issue with Kannel. We have two
different boxes each with a Kannel installation. Every now and then one of
the boxes stops processing SMS queues and the queues just build up. This
happens to both boxes (just not at the same time) When we have a look
VB 6 is no longer supported and is definitely not VB.net. In any event, if
you want to use Kannel on Windows the recommendation is that you use
something like Cygwin. Another option is to use Mono to run .Net
applications on a Linux box. Not sure if the Mono project compiles VB.Net
but I am sure
:
http://www.kannel.org/download/kannel-userguide-snapshot/userguide.html#AEN3170
On Wed, Aug 25, 2010 at 5:09 PM, brett skinner
tatty.dishcl...@gmail.com wrote:
Hi
In an effort to increase through put our SMSC suggested that we created
another bind to them with the exact same
: Alvaro Cornejo
cornejo.alv...@gmail.com
To: brett skinner tatty.dishcl...@gmail.com
Cc: Users users@kannel.org
Sent: Monday, August 23, 2010 5:57 PM
Subject: Re: Kannel restart command
If you do have setup kannel to store the messages on a file or store,
you wont loose any message. You
a new smsc in your configuration, while bb is running. Then, from the
admin page choose:
add-smsc
Let me know how it works.
BR,
Nikos
- Original Message - From: brett skinner
To: Users
Sent: Tuesday, August 24, 2010 12:17 PM
Subject: Re: Kannel restart command
@Alvaro: As Nikos
Hi Users
We had a situation on Saturday where one of our SMSC experienced connection
difficulties with their ISP. When they came back 2 of the 3 binds were
re-established correctly. The 3rd bind reported being connected but all
messages to that bind were getting queued to the bearerbox. I looked
with mallest queue.
BR,
Nikos
- Original Message - From: brett skinner
To: Rene Kluwen
Cc: Users
Sent: Tuesday, August 17, 2010 8:04 PM
Subject: Re: Queue Size from status page
What does the queue size for the bearerbox represent? I thought this was
the total in the system and would
at 10:07 AM, brett skinner
tatty.dishcl...@gmail.comwrote:
Hi Nikos
We already have all of messages load balanced by an upstream application.
When the messages hit Kannel we are forcing them to go via a certain smsc
using the smsc flag and the allowed-smsc-id in the config file. We have
...@kannel.org] *On
Behalf Of *brett skinner
*Sent:* Tuesday, 17 August, 2010 17:32
*To:* Users
*Subject:* Queue Size from status page
Hi
I have looked through the user guide for further explanation of the various
queue sizes from the status page but I have found none. Please view
you probably want to.
== Rene
*From:* brett skinner [mailto:tatty.dishcl...@gmail.com]
*Sent:* Tuesday, 17 August, 2010 19:05
*To:* Rene Kluwen
*Cc:* Users
*Subject:* Re: Queue Size from status page
What does the queue size for the bearerbox represent? I thought
Also you should receive once a month an automated email asking if you still
want to be part of the mailing list. There are hyperlinks in that email to
go to the website where you unsubscribe. It really shouldn't be that hard
unless the system is broken which I doubt. Does this email look familiar
Balkanas nbalka...@gmail.com
Cc: brett skinner tatty.dishcl...@gmail.com; kannel users
users@kannel.org
Sent: Tuesday, August 10, 2010 3:35 AM
Subject: Re: Kannel performance benchmarking
Yeah I understand that. But when the there is no traffic. Kannel doesn't
release the cached
sustainability and reproducibility, yet short
enough to get results fast.
When i submitted fakesmpp, I also released similar data from a 64bit
Solaris 10 server.
BR,
Nikos
- Original Message - From: alejandro.guerri...@gmail.com
To: brett skinner ; users-boun...@kannel.org ; us
at 11:15 AM, brett skinner tatty.dishcl...@gmail.com
wrote:
Hi Alex
That is why I have chosen Innodb for the tables we use for the application
that surround Kannel. MyISAM definitely beat Innodb out the box but Innodb
does seem to be better in terms of the issues you have pointed out
Hi
I have sent through a couple of long messages. Looking through the logs I
can see multiple messages submitted to the SMSC via submit_sm PDUs. However
these is only one deliver_sm coming back from the SMSC (at least according
to the logs). Is the number of deliver_sm PDUs implementation
Hi
We have been sending sms successfully and receiving the DLRs. As far as I
can tell we have been processing them correctly and all the logs in the web
application point to no failures. I had a look at the logs for smsbox and
there were a couple of URLs that it could not fetch but those have
Hi
Sorry forgot to add that I am using mysql storage
-- Forwarded message --
From: brett skinner tatty.dishcl...@gmail.com
Date: Fri, Aug 6, 2010 at 4:06 PM
Subject: Large and growing number of queued DLR
To: Users users@kannel.org
Hi
We have been sending sms successfully
Hi All
Sorry to ask here but I am not sure where I should be looking for answer. I
have message that I am submitting to an SMSC, it is WAP push message SI SMS.
We are not going to handle any WAP, we are just sending it from our system.
Someone else has handled that part. I have created a java
Sorry all
Please disregard the previous mail. I was being an idiot. The text parameter
was not URL encoded. I think lynx will take care of that for you.
Apologies. It has been a long week!
Regards,
-- Forwarded message --
From: brett skinner tatty.dishcl...@gmail.com
Date: Fri
Hi
I would prefer to not have to compile but to get the package. Is what I have
done look correct?
On Tue, Jul 27, 2010 at 1:17 PM, seikath seik...@gmail.com wrote:
its better to compile the cvs version for sure.
http://kannel.org/download.shtml
On 07/27/2010 02:11 PM, brett skinner
/download.shtml
On 07/27/2010 02:11 PM, brett skinner wrote:
Hi
This might not be the best place to ask this question. If it isn't
then
please just let me know. During testing I used Ubuntu 10.4 (Lucid
Lynx).
Our production servers are running
Hi
Can you also send the URL that you used and the logs from the bearerbox and
the smsbox
On Tue, Jul 27, 2010 at 1:01 PM, li...@eliud.co.cc wrote:
Hi,
Am new to this kannel business, was able to configure kannel to receive
sms but am having the following errors when sending out from a http
2010 13:49:06 +0200, brett skinner
tatty.dishcl...@gmail.com wrote:
Hi
Can you also send the URL that you were using.
On Tue, Jul 27, 2010 at 1:01 PM, li...@eliud.co.cc wrote:
Hi,
Am new to this kannel business, was able to configure kannel to receive
sms but am having
Sorry I forgot that second point which Alex made. If you want to do any sort
of extra processing or storage then you need to create the other end of the
dlr-url parameter. Use something like java servlet or a php script. Look in
the userguide to see how to get those values again.
Regards,
On
Hi
Is table 6-15 in the user guide an exhaustive list of the possible reply
codes from Kannel? In essence either 0 or 3. Sent or enqueued. I recall
seeing other messages such as Authorization failed for sendsms but there
was no reply code in front. Is it then safe to assume that any response from
Hi
I search through the documentation but I couldn't find an answer to my
question. It might be there I just could not find. I would like to know what
Kannel does when either:
1. Trying to do the HTTP get request for the DLR if you are using the
dlr-mask and the dlr-url when sending an SMS via
Hi
Are you using SMPP? If so then the ts field although it would seem is a
timestamp but it acutally maps to the unique ID provided by the SMSC for
that message. I asked this question a little while ago and that was the
answer I got and it seems to be correct from my testing. The group can
?
*Christian N'GOLE*
http://www.smseco.com
General Manager WEB PLURIEL
Abidjan - Cocody
*Adresse* : 27 BP 1222 Abj 27
*Email* : supp...@smseco.com
*Tel* : +225 22 42 89 62
*Cel* : +225 07 74 97 97
*Site Web* : www.smseco.com
--- En date de : *Jeu 15.7.10, brett skinner
PLURIEL
Abidjan - Cocody
*Adresse* : 27 BP 1222 Abj 27
*Email* : supp...@smseco.com
*Tel* : +225 22 42 89 62
*Cel* : +225 07 74 97 97
*Site Web* : www.smseco.com
--- En date de : *Jeu 15.7.10, brett skinner tatty.dishcl...@gmail.com*a
écrit :
De: brett skinner tatty.dishcl
À: N'Gole Christian ing_christian2...@yahoo.fr, brett skinner
tatty.dishcl...@gmail.com
Cc: users@kannel.org
Date: Jeudi 15 juillet 2010, 11h34
Hi,
No, ts is the single most important value for dlr matching. Can't do it
without it.
Could be an issue with message-id-type, but your
find ts = 10?
3) Fix your msg-id-type. Read User's guide about it.
BR,
Nikos
- Original Message - From: N'Gole Christian
To: brett skinner
Cc: Nikos Balkanas ; users@kannel.org
Sent: Thursday, July 15, 2010 2:57 PM
Subject: Re: Mysql Timestamp issue
sorry i send txt format
Hi Users
I know this question is more to do with MySQL than Kannel but does anyone
here have a recommendation on the engine type for the MySQL table. Does
Kannel have a preference? At the moment I am using innoDB.
With regards to indexes on the table are there any recommendations? Looking
at the
records).
Regards,
Alex
On Wed, Jul 14, 2010 at 9:40 AM, brett skinner
tatty.dishcl...@gmail.comwrote:
Hi Users
I know this question is more to do with MySQL than Kannel but does anyone
here have a recommendation on the engine type for the MySQL table. Does
Kannel have a preference
, definitely. We tried both, MyISAM performs way better.
On Wed, Jul 14, 2010 at 9:58 AM, brett skinner
tatty.dishcl...@gmail.comwrote:
Thanks for the feedback Alex. Are you suggesting that MyISAM is perhaps
better?
On Wed, Jul 14, 2010 at 3:57 PM, Alejandro Guerrieri
alejandro.guerri
Hi All
I read the following in the user guide regarding validity period
*Optional. If given, Kannel will*
*inform SMS Center that it should*
*only try to send the message for*
*this many minutes. If the*
*destination mobile is off other*
*situation that it cannot receive*
*the sms, the smsc
. Kannel sends to SMSc absolute GMT +
your input * 60.
BR,
Nikos
- Original Message - From: brett skinner
To: users@kannel.org
Sent: Monday, July 12, 2010 11:39 AM
Subject: Query regarding validity period
Hi All
I read the following in the user guide regarding validity period
Hi
Thanks for the information. I did not know that. :)
2010/7/12 Nikos Balkanas nbalka...@gmail.com
Nope, I meant what I said. Kannel, at least the smpp driver, sends seconds
to SMSc.
BR,
Nikos
- Original Message - From: brett skinner
To: Nikos Balkanas
Cc: users@kannel.org
Hi
Firstly I would like to thank the group for all the help that I have
received. I really appreciate it. Secondly I have found usig Kannel to be a
very pleasant experience so thanks for all the hard work. I unfortunately
know absolutely nothing about C and I think my Java knowledge just won't
to achieve what you want and one doesn’t
necessarily needs to be better than the other one.
== Rene
*From:* users-boun...@kannel.org [mailto:users-boun...@kannel.org] *On
Behalf Of *brett skinner
*Sent:* vrijdag 2 juli 2010 14:33
*To:* users@kannel.org
*Subject:* Processing reply
submit_sm_resp
as a DLR to say enqueued.
Regards,
2010/6/30 Nikos Balkanas nbalka...@gmail.com
Hi,
How then did you get the submit_sm_resp from the SMSc?
BR,
Nikos
- Original Message - From: brett skinner
To: users@kannel.org
Sent: Wednesday, June 30, 2010 12:37 PM
Subject: Re: Open
sense, but is difficult to say,
since you never submitted any logs.
BR,
Nikos
- Original Message - From: brett skinner
To: users@kannel.org
Sent: Thursday, July 01, 2010 10:26 AM
Subject: Re: Open DLRs
Hi
I am assuming because I had bound as a transmitter and was sending
Hi
Reading through the documentation I came across this statement:
This is problematic if bearerbox crashes or you take the process down in
a controlled way, but there are still DLRs open. Therefore you may use
external DLR storage places, i.e. a MySQL database.
Does that mean that the MySQL is
will have to
supply a msg-id to that dlr-url, unique for each MT, since msgid is internal
to kannel and not sent over the dlr-url.
For more info read User's Guide.
BR,
Nikos
- Original Message - From: brett skinner
To: users@kannel.org
Sent: Wednesday, June 30, 2010 10:44 AM
Subject
talking to your SMSc.
BR,
Nikos
- Original Message - From: brett skinner
To: users@kannel.org
Sent: Wednesday, June 30, 2010 11:17 AM
Subject: Re: Open DLRs
Hi Nikos
Thanks for your reply. That is the impression that I got. The only thing
that is a little confusing right now
Hi
I am using the mysql dlr storage type. I have everything working except for
the timestamp. This is the output from debug mode
sql: INSERT INTO delivery_receipts (smsc, received, source, destination,
service, url, mask, boxc, status) VALUES ('XXXYYYXXX', '50062911024679487',
'+123123123',
time.
BR,
Nikos
- Original Message - From: brett skinner
To: users@kannel.org
Sent: Tuesday, June 29, 2010 12:12 PM
Subject: Datatype for timestamp for mysql dlr storage
Hi
I am using the mysql dlr storage type. I have everything working except
for the timestamp
Hi
I was checking in the SMPP 3.4 spec and came across the submit_sm_resp PDU
which specifies a message_id field. According to the spec:
This field contains the SMSC
message ID of the submitted
message. It may be used at a
later stage to query the status
of a message, cancel or
replace the
59 matches
Mail list logo