Hi Bob, Have you swapped the fibre inputs to the desk yet? In other words, send to Ch1 and swap the RME output cables to see if it comes though ch9 of your desk.
If it does, the problem is at the desk, or the fibre itself. Cheers, Q On 9/15/10, Frank Smith <frsm...@gmail.com> wrote: >> >> Hi All >> > This seems to be working fine and all levels show the same But I'll make > sure to check! > > Will take the desk apart to make sure the adat card is set ok. > Lock tight is my friend here. > Cheers > Bob > > > >> I would also check the hdspmixer app to check levels and routing >> there. Chances are this is where your problem is. >> _______________________________________________ >> 64studio-users mailing list >> 64studio-users@lists.64studio.com >> http://lists.64studio.com/mailman/listinfo/64studio-users >> > -- Sent from my mobile device _______________________________________________ 64studio-users mailing list 64studio-users@lists.64studio.com http://lists.64studio.com/mailman/listinfo/64studio-users