Mmm..... something similar happened recently... and it was a bad phoenix wiring... i mean... conect phoenix pins as it is indicated in the XAP manual...
----- Original Message ----- From: "Jeremy Mann" <[email protected]> To: "ag-tech" <[email protected]> Sent: Monday, July 18, 2005 4:57 PM Subject: Re: [AG-TECH] Gentner AP400 > I'm so close to getting this thing to work. I finally got the serial > working and setup the machine exactly like the document shows. However, > echo cancelling was still not working, so I built a custom Preset 1 that > worked. > > Several problems occured however, the audio out was extremely low. I had > the gain for Output D cranked all the way up and we could barely hear the > talking. Second, the mic inputs were somehow overloaded and would > constantly clip. Adjusting the levels didn't work, it was either > overloaded or too soft to pick up anything. > > > Natalia Costas Lago said: >> >> There's a pinout scheme for the XAP400 serial cable, probably there's one >> for the AP400. Make a cable with the exact pinout, just to be sure u r >> using >> the right one. >> >> ----- Original Message ----- >> From: "Jeremy Mann" <[email protected]> >> To: "John Hodrien" <[email protected]> >> Cc: <[email protected]> >> Sent: Wednesday, July 06, 2005 3:36 PM >> Subject: Re: [AG-TECH] Gentner AP400 >> >> >>> >>> John Hodrien said: >>>> On Tue, 5 Jul 2005, Darin Oman wrote: >>>> >>>>> Hi Jeremy, >>>>> >>>>> Are you sure the serial port on the computer is enabled/working? >>>> >>>> ClearOne recommended disabling the hardware flow control when we had >>>> problems >>>> with connecting to the device. >>> >>> Thanks John, but I tried all the settings in the RS232 menu and it still >>> didn't work. I'm going to try some cables. I know the cable from our >>> managed switch works so I'm going to try that cable next. >>> >>> >>> >>> -- >>> Jeremy Mann >>> [email protected] >>> >>> University of Texas Health Science Center >>> Bioinformatics Core Facility >>> http://www.bioinformatics.uthscsa.edu >>> Phone: (210) 567-2672 >>> >>> >> > > > -- > Jeremy Mann > [email protected] > > University of Texas Health Science Center > Bioinformatics Core Facility > http://www.bioinformatics.uthscsa.edu > Phone: (210) 567-2672 > >
