Doublecheck your echo cancellation refs. If you have a mic fed to an EC ref, it can cause the symptoms you are seeing.
--bob On Jul 18, 2005, at 9:57 AM, Jeremy Mann wrote: > I'm so close to getting this thing to work. I finally got the serial > working and setup the machine exactly like the document shows. > However, > echo cancelling was still not working, so I built a custom Preset 1 > that > worked. > > Several problems occured however, the audio out was extremely low. > I had > the gain for Output D cranked all the way up and we could barely > hear the > talking. Second, the mic inputs were somehow overloaded and would > constantly clip. Adjusting the levels didn't work, it was either > overloaded or too soft to pick up anything. > > > Natalia Costas Lago said: > >> >> There's a pinout scheme for the XAP400 serial cable, probably >> there's one >> for the AP400. Make a cable with the exact pinout, just to be sure >> u r >> using >> the right one. >> >> ----- Original Message ----- >> From: "Jeremy Mann" <[email protected]> >> To: "John Hodrien" <[email protected]> >> Cc: <[email protected]> >> Sent: Wednesday, July 06, 2005 3:36 PM >> Subject: Re: [AG-TECH] Gentner AP400 >> >> >> >>> >>> John Hodrien said: >>> >>>> On Tue, 5 Jul 2005, Darin Oman wrote: >>>> >>>> >>>>> Hi Jeremy, >>>>> >>>>> Are you sure the serial port on the computer is enabled/working? >>>>> >>>> >>>> ClearOne recommended disabling the hardware flow control when we >>>> had >>>> problems >>>> with connecting to the device. >>>> >>> >>> Thanks John, but I tried all the settings in the RS232 menu and >>> it still >>> didn't work. I'm going to try some cables. I know the cable from our >>> managed switch works so I'm going to try that cable next. >>> >>> >>> >>> -- >>> Jeremy Mann >>> [email protected] >>> >>> University of Texas Health Science Center >>> Bioinformatics Core Facility >>> http://www.bioinformatics.uthscsa.edu >>> Phone: (210) 567-2672 >>> >>> >>> >> >> > > > -- > Jeremy Mann > [email protected] > > University of Texas Health Science Center > Bioinformatics Core Facility > http://www.bioinformatics.uthscsa.edu > Phone: (210) 567-2672 > >
