Mike, I have had problems with the Node Setup Wizard when, for some reason, the GLOBUS_HOSTNAME environment variable has not been set correctly. The globus setup wizard should fix the hostname problem (Access Grid Toolkit 2.0-Configure-Reconfigure Globus).
Regards, Susanne On Wed, 14 Apr 2004, Ivan R. Judson wrote: > > No problem; just saw the part where it was use the wizard or do it manually, > and that's the manual approach. We'll help figure out your problem and get > things working... > > --Ivan > > > -----Original Message----- > > From: Mike Weaver [mailto:[email protected]] > > Sent: Wednesday, April 14, 2004 8:50 AM > > To: [email protected]; [email protected]; 'Randy Groves' > > Subject: Re: [AG-TECH] Node Setup Wizard problems > > > > Yes, I've read it, but using NodeManagement.py to add the > > audio & video machines using the Add Service Manager dialog > > doesn't work either as I mentioned in my last post. I > > attached my logs to that post, but the agsm.log & agns.log > > files are empty. > > > > Believe me, I understand how busy you guys are and I don't > > post for assistance unless I've exhausted all avenues of research :) > > > > Thanks, and I'll keep plugging away at it. > > > > Mike > > > > ----- Original Message ----- > > From: "Ivan R. Judson" <[email protected]> > > To: "'Mike Weaver'" <[email protected]>; > > <[email protected]>; "'Randy Groves'" <[email protected]> > > Sent: Wednesday, April 14, 2004 09:29 > > Subject: RE: [AG-TECH] Node Setup Wizard problems > > > > > > > > > > Not to sound flippant, but have you read the existing docs? > > > > > > > > http://www-unix.mcs.anl.gov/fl/research/accessgrid/documentati > > on/RoomBasedNo > > > de-HowTo/RoomBasedNode-HowTo.html > > > > > > Looks like that is what you both want. > > > > > > --Ivan > > > > > > > -----Original Message----- > > > > From: [email protected] > > > > [mailto:[email protected]] On Behalf Of Mike Weaver > > > > Sent: Wednesday, April 14, 2004 5:03 AM > > > > To: [email protected]; Randy Groves > > > > Subject: Re: [AG-TECH] Node Setup Wizard problems > > > > > > > > Ditto! > > > > > > > > ----- Original Message ----- > > > > From: "Randy Groves" <[email protected]> > > > > To: <[email protected]> > > > > Sent: Wednesday, April 14, 2004 02:21 > > > > Subject: Re: [AG-TECH] Node Setup Wizard problems > > > > > > > > > > > > > I don't remember, but aren't there instructions (or is it not > > > > possible?) > > > > > for setting up a multiple machine node WITHOUT the Node > > > > Setup Wizard? > > > > I'm > > > > > running into similar problems. Time constraints dictate > > > > just getting > > > > this > > > > > set up - whether I use the wizard or not. > > > > > > > > > > -randy > > > > > > > > > > At 12:16 PM 4/13/2004, Thomas D. Uram wrote: > > > > > >Hi Mike: > > > > > > > > > > > >Can you try configuring your node using > > NodeManagement.py? This > > > > should > > > > > >provide additional info about the problem you're > > having, possibly > > > > within > > > > > >NodeManagement itself, and probably in the log files (agns.log, > > > > agsm.log, > > > > > >AGService.log). This way, you can get your node set up, and we > > can > > > > > >understand the problem that the node setup wizard is > > > > running into and > > > > fix it. > > > > > > > > > > > >Let me know what happens, and send your log files > > along if things > > > > don't > > > > > >work out. > > > > > > > > > > > >Thanks, > > > > > > > > > > > >Tom > > > > > > > > > > > > > > > > > >Mike Weaver wrote: > > > > > > > > > > > >>I installed all prerequisites and AGTK 2.1.2 on my room node > > > > (Display: > > > > > >>Win2K, Audio:RHL 7.3, Video: RHL 7.3) and imported my > > > > certificate to > > > > all > > > > > >>3 machines. I ran AGServiceManager.py on all > > machines and then > > > > > >>NodeSetupWizard.pyw from the (W2K) Display machine. When it > > tries > > > > to > > > > > >>connect to the Video Capture machine, it fails. All > > systems are > > > > > >>time-sync'ed and DNS-resolvable (each can ping the > > others). All > > > > certs > > > > > >>(Globus & ANL CA and my ID) look fine on machines. > > > > > >> > > > > > >>I see the AGServiceManager running on the video machine > > > > and tcpdump > > > > > >>shows traffic in both directions when the display machine > > attempts > > > > to > > > > > >>connect, but it still fails. The agsm.log file on the > > > > video machine > > > > is > > > > > >>empty even with the --debug option. The agsm.log file on the > > > > display > > > > > >>machine is also empty. The NodeSetupWizard.log on the Display > > > > machine > > > > > >>says: > > > > > >> > > > > > >>04/13/04 12:32:52 1728 AG.NodeSetupWizard > > nodesetupwizard.pyw:332 > > > > INFO > > > > > >>NodeSetupWizard:VideoCaptureWindow:Validate: Service > > > > manager is not > > > > > >>started > > > > > >> > > > > > >>Any advise would be appreciated. > > > > > >> > > > > > >>Mike > > > > > >> > > > > > >>-- > > > > > >>Mike Weaver > > > > > >>Sr. Network Administrator > > > > > >>SC-31/Germantown Building > > > > > >>US Department of Energy > > > > > >>1000 Independence Avenue, SW > > > > > >>Washington, D.C. 20585-1290 > > > > > >>Voice: 301-903-0072 > > > > > >>Fax: 301-528-2701 > > > > > >>Email: [email protected] > > > > > >> > > > > > >> > > > > > >> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
