Yes, I've read it, but using NodeManagement.py to add the audio & video machines using the Add Service Manager dialog doesn't work either as I mentioned in my last post. I attached my logs to that post, but the agsm.log & agns.log files are empty.
Believe me, I understand how busy you guys are and I don't post for assistance unless I've exhausted all avenues of research :) Thanks, and I'll keep plugging away at it. Mike ----- Original Message ----- From: "Ivan R. Judson" <[email protected]> To: "'Mike Weaver'" <[email protected]>; <[email protected]>; "'Randy Groves'" <[email protected]> Sent: Wednesday, April 14, 2004 09:29 Subject: RE: [AG-TECH] Node Setup Wizard problems > > Not to sound flippant, but have you read the existing docs? > > http://www-unix.mcs.anl.gov/fl/research/accessgrid/documentation/RoomBasedNo > de-HowTo/RoomBasedNode-HowTo.html > > Looks like that is what you both want. > > --Ivan > > > -----Original Message----- > > From: [email protected] > > [mailto:[email protected]] On Behalf Of Mike Weaver > > Sent: Wednesday, April 14, 2004 5:03 AM > > To: [email protected]; Randy Groves > > Subject: Re: [AG-TECH] Node Setup Wizard problems > > > > Ditto! > > > > ----- Original Message ----- > > From: "Randy Groves" <[email protected]> > > To: <[email protected]> > > Sent: Wednesday, April 14, 2004 02:21 > > Subject: Re: [AG-TECH] Node Setup Wizard problems > > > > > > > I don't remember, but aren't there instructions (or is it not > > possible?) > > > for setting up a multiple machine node WITHOUT the Node > > Setup Wizard? > > I'm > > > running into similar problems. Time constraints dictate > > just getting > > this > > > set up - whether I use the wizard or not. > > > > > > -randy > > > > > > At 12:16 PM 4/13/2004, Thomas D. Uram wrote: > > > >Hi Mike: > > > > > > > >Can you try configuring your node using NodeManagement.py? This > > should > > > >provide additional info about the problem you're having, possibly > > within > > > >NodeManagement itself, and probably in the log files (agns.log, > > agsm.log, > > > >AGService.log). This way, you can get your node set up, and we can > > > >understand the problem that the node setup wizard is > > running into and > > fix it. > > > > > > > >Let me know what happens, and send your log files along if things > > don't > > > >work out. > > > > > > > >Thanks, > > > > > > > >Tom > > > > > > > > > > > >Mike Weaver wrote: > > > > > > > >>I installed all prerequisites and AGTK 2.1.2 on my room node > > (Display: > > > >>Win2K, Audio:RHL 7.3, Video: RHL 7.3) and imported my > > certificate to > > all > > > >>3 machines. I ran AGServiceManager.py on all machines and then > > > >>NodeSetupWizard.pyw from the (W2K) Display machine. When it tries > > to > > > >>connect to the Video Capture machine, it fails. All systems are > > > >>time-sync'ed and DNS-resolvable (each can ping the others). All > > certs > > > >>(Globus & ANL CA and my ID) look fine on machines. > > > >> > > > >>I see the AGServiceManager running on the video machine > > and tcpdump > > > >>shows traffic in both directions when the display machine attempts > > to > > > >>connect, but it still fails. The agsm.log file on the > > video machine > > is > > > >>empty even with the --debug option. The agsm.log file on the > > display > > > >>machine is also empty. The NodeSetupWizard.log on the Display > > machine > > > >>says: > > > >> > > > >>04/13/04 12:32:52 1728 AG.NodeSetupWizard nodesetupwizard.pyw:332 > > INFO > > > >>NodeSetupWizard:VideoCaptureWindow:Validate: Service > > manager is not > > > >>started > > > >> > > > >>Any advise would be appreciated. > > > >> > > > >>Mike > > > >> > > > >>-- > > > >>Mike Weaver > > > >>Sr. Network Administrator > > > >>SC-31/Germantown Building > > > >>US Department of Energy > > > >>1000 Independence Avenue, SW > > > >>Washington, D.C. 20585-1290 > > > >>Voice: 301-903-0072 > > > >>Fax: 301-528-2701 > > > >>Email: [email protected] > > > >> > > > >> > > > >> > > > > > > > > > > > > > >
