Not to sound flippant, but have you read the existing docs? http://www-unix.mcs.anl.gov/fl/research/accessgrid/documentation/RoomBasedNo de-HowTo/RoomBasedNode-HowTo.html
Looks like that is what you both want. --Ivan > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Mike Weaver > Sent: Wednesday, April 14, 2004 5:03 AM > To: [email protected]; Randy Groves > Subject: Re: [AG-TECH] Node Setup Wizard problems > > Ditto! > > ----- Original Message ----- > From: "Randy Groves" <[email protected]> > To: <[email protected]> > Sent: Wednesday, April 14, 2004 02:21 > Subject: Re: [AG-TECH] Node Setup Wizard problems > > > > I don't remember, but aren't there instructions (or is it not > possible?) > > for setting up a multiple machine node WITHOUT the Node > Setup Wizard? > I'm > > running into similar problems. Time constraints dictate > just getting > this > > set up - whether I use the wizard or not. > > > > -randy > > > > At 12:16 PM 4/13/2004, Thomas D. Uram wrote: > > >Hi Mike: > > > > > >Can you try configuring your node using NodeManagement.py? This > should > > >provide additional info about the problem you're having, possibly > within > > >NodeManagement itself, and probably in the log files (agns.log, > agsm.log, > > >AGService.log). This way, you can get your node set up, and we can > > >understand the problem that the node setup wizard is > running into and > fix it. > > > > > >Let me know what happens, and send your log files along if things > don't > > >work out. > > > > > >Thanks, > > > > > >Tom > > > > > > > > >Mike Weaver wrote: > > > > > >>I installed all prerequisites and AGTK 2.1.2 on my room node > (Display: > > >>Win2K, Audio:RHL 7.3, Video: RHL 7.3) and imported my > certificate to > all > > >>3 machines. I ran AGServiceManager.py on all machines and then > > >>NodeSetupWizard.pyw from the (W2K) Display machine. When it tries > to > > >>connect to the Video Capture machine, it fails. All systems are > > >>time-sync'ed and DNS-resolvable (each can ping the others). All > certs > > >>(Globus & ANL CA and my ID) look fine on machines. > > >> > > >>I see the AGServiceManager running on the video machine > and tcpdump > > >>shows traffic in both directions when the display machine attempts > to > > >>connect, but it still fails. The agsm.log file on the > video machine > is > > >>empty even with the --debug option. The agsm.log file on the > display > > >>machine is also empty. The NodeSetupWizard.log on the Display > machine > > >>says: > > >> > > >>04/13/04 12:32:52 1728 AG.NodeSetupWizard nodesetupwizard.pyw:332 > INFO > > >>NodeSetupWizard:VideoCaptureWindow:Validate: Service > manager is not > > >>started > > >> > > >>Any advise would be appreciated. > > >> > > >>Mike > > >> > > >>-- > > >>Mike Weaver > > >>Sr. Network Administrator > > >>SC-31/Germantown Building > > >>US Department of Energy > > >>1000 Independence Avenue, SW > > >>Washington, D.C. 20585-1290 > > >>Voice: 301-903-0072 > > >>Fax: 301-528-2701 > > >>Email: [email protected] > > >> > > >> > > >> > > > > > > > > >
