My working experience is primarily outside the PKI space, but I can offer some perspectives on scalability and deployment architecture issues.
WebSocket is entirely appropriate for real-time or near-real-time bidirectional communications of an asynchronous nature. The overhead of WebSocket as a pure transport for the various ACME messages back and forth between the client and the server could be done, but would any server side implementation ever take full advantage with the appropriate async callbacks to actually achieve faster certificate delivery. Especially with CT logging being a pragmatic requirement, time-to-delivery for certificates is likely to increase (slightly) rather than decrease. In the kind of pattern that getting a certificate represents it seems WebSocket would add significant overhead without a lot of performance advantage. If the content and nature of the messages would change based on WebSocket used as a transport, then you’ve got a whole new set of threats to model and consider. Perhaps before going down that road, it would be useful to poll server-side implementers and deployers and see if there’s interest in a WebSocket delivery channel. > On Mar 5, 2018, at 8:11 AM, Felipe Gasper <fel...@felipegasper.com> wrote: > > For what it’s worth: > > Regarding alternative formats, I think ACME over WebSocket would be a great > thing. Replay-nonce would go away, and clients wouldn’t need to poll for the > certificate unless the connection dropped. The server could send the > certificate as soon as it’s ready. A simple handshake at the start could take > the place of JWS, too. > > -F > >> On Mar 5, 2018, at 12:02 AM, Martin Thomson <martin.thom...@gmail.com> wrote: >> >> Unless you believe that an alternative format is ever desirable. CBOR >> for version 2 might be a terrible idea, but I know the IETF well >> enough not to rule that out entirely. >> >> On Mon, Mar 5, 2018 at 3:38 PM, Richard Barnes <r...@ipv.sx> wrote: >>> I also note that there's no issue with Accept if we require the use of the >>> Flattened JSON serialization. >>> >>> https://i.imgflip.com/25r2ui.jpg >>> >>> https://github.com/ietf-wg-acme/acme/pull/410 >>> >>> On Sun, Mar 4, 2018 at 6:28 PM, Martin Thomson <martin.thom...@gmail.com> >>> wrote: >>>> >>>> That's a bit silly. I'll follow-up with httpbis. I think that's an >>>> error, though probably only an error of omission. 7694 was so fixated >>>> on solving the content-coding issue, it neglected the obvious >>>> accompanying fix. >>>> >>>> On Mon, Mar 5, 2018 at 9:38 AM, Richard Barnes <r...@ipv.sx> wrote: >>>>> How about Accept? It looks like 7694 gives the server a way to specify >>>>> encodings, but not the content type. But 7231 says that Accept only >>>>> replies >>>>> to response media types. >>>>> >>>>> On Sun, Mar 4, 2018 at 5:33 PM, Martin Thomson >>>>> <martin.thom...@gmail.com> >>>>> wrote: >>>>>> >>>>>> 415 is for the case where a client provides bad request content, so >>>>>> yes. >>>>>> See rfc7694 for details. >>>>>> >>>>>> 406 is for failed conneg. Not something you expect to see much here. >>>>>> >>>>>> >>>>>> On 5 Mar. 2018 09:25, "Richard Barnes" <r...@ipv.sx> wrote: >>>>>> >>>>>> The lengths of the emails in this thread illustrate the complexity risk >>>>>> here :) >>>>>> >>>>>> In the interest of simplicity, I would really like to stick to >>>>>> Flattened >>>>>> JSON unless someone has **strong** objections. >>>>>> >>>>>> Logan, to your point about library compatibility, two notes: (1) it's >>>>>> OK >>>>>> if we front-run libraries a little. It's not hard for libraries to >>>>>> upgrade; >>>>>> this is only formatting, no crypto changes needed. (2) Empirically, >>>>>> this >>>>>> must not be too big a blocker for people, since as Jacob notes, Let's >>>>>> Encrypt only supports Flattened JSON right now and they've got a bunch >>>>>> of >>>>>> clients talking to them. >>>>>> >>>>>> As far as headers / response codes: You're correct that 406 is wrong / >>>>>> 415 >>>>>> is right. But ISTM that Accept is still the right header to say what >>>>>> is >>>>>> right. So the server should return 415+Accept. Copying Thomson to >>>>>> check >>>>>> our work here. >>>>>> >>>>>> --Richard >>>>>> >>>>>> On Sun, Mar 4, 2018 at 10:43 AM, Logan Widick <logan.wid...@gmail.com> >>>>>> wrote: >>>>>>> >>>>>>> How about this: Specify a default format (either "application/jose" >>>>>>> for >>>>>>> Compact Serialization, or "application/jose+json" with Flattened >>>>>>> Serialization - I have no preference which one), with optional support >>>>>>> for >>>>>>> other formats if needed? Even with JOSE libraries that don't support >>>>>>> all >>>>>>> serializations and/or don't provide control over which serialization >>>>>>> is >>>>>>> used, a programmer would at least need to know (or experimentally find >>>>>>> out) >>>>>>> if a JSON serialization or if the compact one is being produced. If a >>>>>>> JSON >>>>>>> serialization is selected as the default, a programmer should be able >>>>>>> to >>>>>>> convert between the two JSON serializations easily as needed before >>>>>>> and/or >>>>>>> after using a JOSE library. If a JSON format is declared as the >>>>>>> default but >>>>>>> the JOSE library only has the compact one, or vice-versa, conversion >>>>>>> before >>>>>>> and/or after the JOSE library would be more complex but should still >>>>>>> be >>>>>>> doable with guidance. >>>>>>> >>>>>>> The directory meta item could be defined as something like: >>>>>>> >>>>>>> supportedSerializations: An array of supported serialization formats >>>>>>> as >>>>>>> described in {{jws-serialization-formats}}. If this is not specified, >>>>>>> assume >>>>>>> that the server only supports [insert selected default here]. >>>>>>> >>>>>>> Then, the JWS Serialization Formats section could be changed to >>>>>>> something >>>>>>> like the following: >>>>>>> >>>>>>> The JSON Web Signature (JWS) specification {{!RFC7515}} contains >>>>>>> multiple >>>>>>> JWS serialization formats. When sending an ACME request with a >>>>>>> non-empty >>>>>>> body, an ACME client implementation SHOULD use the HTTP Content-Type >>>>>>> {{!RFC7231}} header to indicate which JWS serialization format is used >>>>>>> for >>>>>>> encapsulating the ACME request payload. >>>>>>> >>>>>>> Each serialization format defined for use in ACME is described with a >>>>>>> content type, and a series of ACME-specific restrictions on root JWS >>>>>>> and >>>>>>> nested JWS instances. A "root JWS" is a JWS used to encapsulate an >>>>>>> entire >>>>>>> ACME request payload, and a "nested JWS" is a JWS contained within the >>>>>>> ACME >>>>>>> request payload (such as the "externalAccountBinding" described in >>>>>>> {{external-account-binding}} or the "key-change" object described in >>>>>>> {{account-key-roll-over}}). Below are the JWS serialization formats >>>>>>> that are >>>>>>> defined for use in ACME: >>>>>>> >>>>>>> [same list as before but with the default format coming first] >>>>>>> >>>>>>> If no Content-Type is provided, the default serialization type is >>>>>>> [insert >>>>>>> selected default here]. Servers MUST support [insert selected default >>>>>>> here]. >>>>>>> [NOTE: If a JSON format is selected as the default, say that a server >>>>>>> SHOULD >>>>>>> support the other JSON format.] A server MAY support additional >>>>>>> serializations, such as [insert serialization(s) not picked here], by >>>>>>> including a "supportedSerializations" field in the directory "meta" >>>>>>> object >>>>>>> as described in {{directory}}. >>>>>>> >>>>>>> If a server receives a request using a serialization it does not >>>>>>> support, >>>>>>> the server MUST send a response with HTTP status code 415 >>>>>>> (Unacceptable >>>>>>> Media Type) and a problem document with error type >>>>>>> "unsupportedSerialization". This problem document SHOULD contain a >>>>>>> "supportedSerializations" array of strings indicating the acceptable >>>>>>> serialization content types. >>>>>>> >>>>>>> [TODO: If a client uses the General JSON Serialization but it turns >>>>>>> out >>>>>>> the server only supports the Flattened JSON Serialization (or >>>>>>> vice-versa), >>>>>>> explain that a 415 response indicates that the client will need to >>>>>>> switch >>>>>>> JSON formats] >>>>>>> >>>>>>> [TODO: Insert a sentence or two specifying what happens if a supported >>>>>>> serialization is used but the serialization is malformed? Should this >>>>>>> be 400 >>>>>>> Bad Request + malformed error code + supportedSerializations?] >>>>>>> >>>>>>> In the examples below, JWS objects are shown in the Flattened JSON >>>>>>> serialization, with the protected header and payload expressed as >>>>>>> base64url(content) instead of the actual base64-encoded value, so that >>>>>>> the >>>>>>> content is readable. [Example readability is a very high priority >>>>>>> regardless >>>>>>> of which serialization format is actually chosen as the default, and >>>>>>> the >>>>>>> current convention of Flattened JSON + base64url(content) is about as >>>>>>> readable as it gets, so I don't think any changes will need to be made >>>>>>> here] >>>>>>> >>>>>>> >>>>>>> On Sun, Mar 4, 2018 at 8:33 AM, Jörn Heissler >>>>>>> <acme-sp...@joern.heissler.de> wrote: >>>>>>>> >>>>>>>> On Sun, Mar 04, 2018 at 07:45:36 -0600, Logan Widick wrote: >>>>>>>>> Good catch. Should it be 415 (Unsupported Media Type) plus which of >>>>>>>>> the >>>>>>>>> following (or which combination of the following): >>>>>>>>> >>>>>>>>> - A new problem document field (tentatively named >>>>>>>>> "supportedSerializations": an array of media type strings)? >>>>>>>>> - A new directory field (tentatively named >>>>>>>>> "supportedSerializations": an >>>>>>>>> array of media type strings)? >>>>>>>>> - Should this go in the directory's "meta" object, or in the >>>>>>>>> directory object itself? >>>>>>>>> - A HTTP header? >>>>>>>>> - Something else? >>>>>>>> >>>>>>>> I like the directory approach with meta. Then a client could >>>>>>>> use this information before sending the first POST. Else the client >>>>>>>> would need to change an internal state after receiving the error >>>>>>>> message. For my own client, I'm planning to support the OpenPGP smart >>>>>>>> card. It takes 3 seconds to generate a signature. If a signature is >>>>>>>> wasted to find out that the default serialization is not supported, >>>>>>>> it >>>>>>>> would be annoying. Having to write a configuration file "use compact >>>>>>>> by >>>>>>>> default for CA foo" would be stupid too. >>>>>>>> >>>>>>>> This, and the problem document field. "supportedSerializations" >>>>>>>> sounds >>>>>>>> fine. >>>>>>>> >>>>>>>> Should the two features be OPTIONAL? >>>>>>>> >>>>>>>> I don't like HTTP headers, it's quite complicated to parse them >>>>>>>> correctly. >>>>>>>> JSON is so much easier. >>>>>>>> >>>>>>>> >>>>>>>> Or... specify that flattened MUST BE used :-) >>>>>>>> >>>>>>>> Cheers >>>>>>>> Joern Heissler >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>> >>> >>> >> >> _______________________________________________ >> Acme mailing list >> Acme@ietf.org >> https://www.ietf.org/mailman/listinfo/acme > > _______________________________________________ > Acme mailing list > Acme@ietf.org > https://www.ietf.org/mailman/listinfo/acme _______________________________________________ Acme mailing list Acme@ietf.org https://www.ietf.org/mailman/listinfo/acme
