http://bugzilla.kernel.org/show_bug.cgi?id=9320
------- Comment #37 from [EMAIL PROTECTED] 2007-12-11 11:47 ------- Created an attachment (id=13976) --> (http://bugzilla.kernel.org/attachment.cgi?id=13976&action=view) lspci -vvvxxx Didn't had time to check my mail, so I just only now read your requests. Attached lspci is from 2.6.24-rc3-mm2 I did see only see the ACPI error message with 2.6.23-mm1, both 2.6.24-rc2-mm1 and 2.6.24-rc3-mm2 worked without it. Bevor 2.6.23-mm1 I see: ata9: ACPI get timing mode failed (AE 0x1001) On 2.6.23-mm1 I see: ata9: ACPI get timing mode failed (AE 0x300d) Both 2.6.24-rc's say: ata9: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 ata9.01: ATA-7: Maxtor 6L250R0, BAH41G10, max UDMA/133 ata9.01: 490234752 sectors, multi 16: LBA48 ata9: nv_mode_filter: 0x7f39f&0x701f->0x701f, BIOS=0x7000 (0xc00000) ACPI=0x701f (900:60:0x14) ata9.01: configured for UDMA/33 All 2.6.23 correctly complained: ata9.01: limited to UDMA/33 due to 40-wire cable DSDT will follow... -- Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------------------------------------------------------------------------- SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ acpi-bugzilla mailing list acpi-bugzilla@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/acpi-bugzilla
