http://bugzilla.kernel.org/show_bug.cgi?id=9320
------- Comment #38 from [EMAIL PROTECTED] 2007-12-11 12:00 ------- Created an attachment (id=13980) --> (http://bugzilla.kernel.org/attachment.cgi?id=13980&action=view) DSDT from Bios v0208 (In reply to comment #32) > We've found one case where the _GTM method execution fails if the PATA port > has > no devices connected due to register values on the controller in that case > that > the ASL code doesn't handle. I also have only one device attached to the pata port of the MCP55 Hmm... I just noticed this: ata9: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 ata10: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [snip] ata9.01: configured for UDMA/33 ata10: port disabled. ignoring Shouldn't the second/slave drive be ata9.02? This board does not have a second physical pata port and I think even the chipset only has one... DSDT attached, I hope, I extracted/disassembled it correctly. -- Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------------------------------------------------------------------------- SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ acpi-bugzilla mailing list acpi-bugzilla@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/acpi-bugzilla
