http://bugzilla.kernel.org/show_bug.cgi?id=9320
------- Comment #43 from [EMAIL PROTECTED] 2007-12-12 12:27 ------- PS: I just seen that the detection empty/not empty seems to be completely busted for the MCP55, as the ata devices do not start with ata0 ata1+2: sata_sil24 with two drives ata3..8: sata_nv, only one port has a drive ata9: pata_amd, one drive ata10: ??? BIOS bug? Did someone think that there should always be two IDE channels? ata3: XXX skipping _GTM on empty channel ata4: XXX skipping _GTM on empty channel ata3: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 23 ata4: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 23 ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: ATA-7: MAXTOR STM3320820AS, 3.AAE, max UDMA/133 ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) ata3.00: configured for UDMA/133 ata4: SATA link down (SStatus 0 SControl 300) The drive on port ata3 works normal... -- Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------------------------------------------------------------------------- SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ acpi-bugzilla mailing list acpi-bugzilla@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/acpi-bugzilla
