RE: [ActiveDir] Exchange and AD E-mails

[joe]

Also a dump of the object as I mentioned in my previous post would be handy. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Michael B. Smith Sent: Friday, July 30, 2004 3:13 PM To: [EMAIL PROTECTED] Subject: RE: [ActiveDir] Exchange and AD E-mails what is the NDR? From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mike Hogenauer Sent: Friday, July 30, 2004 3:07 PM To: [EMAIL PROTECTED] Subject: RE: [ActiveDir] Exchange and AD E-mails I have run a rebuild of the RUS and yes I go get a NDR when I send to the address... I also tested other protocols if it matters IMAP. POP   From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Alex Fontana Sent: Friday, July 30, 2004 11:14 AM To: [EMAIL PROTECTED] Subject: RE: [ActiveDir] Exchange and AD E-mails   The two responses make good points; can you send an email to the address, do you get an NDR?  And has the RUS stamped the mailbox with the addresses?  I've had the RUS stop stamping addresses, which caused the mailbox not to be created (can't log in) and have had to run a rebuild, you may want to give that a try.   -Alex   From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Michael B. Smith Sent: Friday, July 30, 2004 10:52 AM To: [EMAIL PROTECTED] Subject: RE: [ActiveDir] Exchange and AD E-mails Did the user get stamped with addresses from the default recipient policy?   From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mike Hogenauer Sent: Friday, July 30, 2004 1:22 PM To: [EMAIL PROTECTED] Subject: [ActiveDir] Exchange and AD E-mails Not sure this is the correct forum for this but here goes. I have a WIN 2k single domain running Exchange 2K.   Everything’s has been running fine until a few days ago. Now when I create a new mail enables user in AD. And try to log onto the account to setup the mapi mail profiles I get “cannot connect to the information Store” but when log on as myself or any other user that was already in the domain I have no problems connecting and viewing e-mail. (The only change was the Exchange SP3 security roll-up patch was applied a few weeks ago) I’ve checked the replication between the DC’s and Exchange, no problems, RPC is running and no other mapi problems show up with any other accounts only new accounts are having problems. My current Info store is about 19 GB in size. I did create an additional store with in my First storage group and I can create a mail enabled account and connect using that store. I’m concerned the Problem is with AD… ANY advice would be greatly appreciated.   Thanks in advance. Mike