Check your node setting, is the mountlimit set to two?

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of
Þórður Aðalsteinsson
Sent: Sunday, March 03, 2002 4:25 AM
To: [EMAIL PROTECTED]
Subject: Re: TSM 4.2.1.9 on Win NT, insufficient number of mount points

Hi,

This is a clean install so migration has newer been possible and yes i have
two drives available online

-----Original Message-----
From: TAZ [mailto:[EMAIL PROTECTED]]
Sent: 2. mars 2002 23:49
To: [EMAIL PROTECTED]
Subject: Re: TSM 4.2.1.9 on Win NT, insufficient number of mount points


Hello,

Was migration possible prior to upgrading?

Its not clear from you description if you actually have 2 available drives.

Check your drives and make certain you are not retaining a cleaning tape in
one drive.


Sam
----- Original Message -----
From: "^srpur Apalsteinsson" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, March 02, 2002 5:26 PM
Subject: TSM 4.2.1.9 on Win NT, insufficient number of mount points


Hi y4all

I am installing TSM 4.2.1.9 on Win NT, I have a Dell PowerVault 128T
library.

My problem is that when migrating from disk to tape I get this right away,
ANR0984I Process 28 for MIGRATION started in the BACKGROUND at 23:20:49.
ANR1000I Migration process 28 started for storage pool DISKPOOL. ANR1134W
Migration terminated for storage pool DISKPOOL - insufficient number of
mount points available for removable media. ANR0985I Process 28 for
MIGRATION running in the BACKGROUND completed with completion state FAILURE
at 23:20:49. ANR1002I Migration for storage pool DISKPOOL will be retried in
60 seconds. ANR1003I Migration retry delay ended; checking migration status
for storage pool DISKPOOL.

However im able to label and checkin volumes without any problems

I have changed the mount limit from drives to 2 (update dev ltoclass1
libr=lb0.0.0.2 devtype=lto mountlimit=2). That changed nothing

My feeling is that im overlooking somthing in the config of the library or
drives

I also have a newer version of firmware then the one tested with TSM.

Would changing OS4s do anything, go to W2K?

Best regards





^srpur Apalsteinsson

MCSE, MCP+I

Margmiplun Internet, Fyrirtfkja~jsnusta

Supurlandsbraut 4

105, Reykjavmk

Smmi 575 7000

e-mail: [EMAIL PROTECTED]

www.mi.is

Reply via email to