Þórður, I'd suggest removing & recreating the tape drive devices.
Steffan ----- Original Message ----- From: "Þórður Aðalsteinsson" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, March 04, 2002 8:32 AM Subject: Re: TSM 4.2.1.9 on Win NT, insufficient number of mount points The only successful operation is labeling tapes, nothing else -----Original Message----- From: ARhoads [mailto:[EMAIL PROTECTED]] Sent: 4. mars 2002 08:09 To: [EMAIL PROTECTED] Subject: Re: TSM 4.2.1.9 on Win NT, insufficient number of mount points Þórður, If you have only two tape drives then you probably want your storage pool to only reference one else you would use both of your tape drives for migration... Can you get a successful TSM database backup or any other operation to use a tape drive? Steffan ----- Original Message ----- From: "Þórður Aðalsteinsson" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, March 03, 2002 12:46 PM Subject: Re: TSM 4.2.1.9 on Win NT, insufficient number of mount points Hi and thanx Are you refering to the client node, if so then i have updated the mountlimit to two and still the same result. -----Original Message----- From: Jack Musselman [mailto:[EMAIL PROTECTED]] Sent: 3. mars 2002 17:27 To: [EMAIL PROTECTED] Subject: Re: TSM 4.2.1.9 on Win NT, insufficient number of mount points Check your node setting, is the mountlimit set to two? -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of Þórður Aðalsteinsson Sent: Sunday, March 03, 2002 4:25 AM To: [EMAIL PROTECTED] Subject: Re: TSM 4.2.1.9 on Win NT, insufficient number of mount points Hi, This is a clean install so migration has newer been possible and yes i have two drives available online -----Original Message----- From: TAZ [mailto:[EMAIL PROTECTED]] Sent: 2. mars 2002 23:49 To: [EMAIL PROTECTED] Subject: Re: TSM 4.2.1.9 on Win NT, insufficient number of mount points Hello, Was migration possible prior to upgrading? Its not clear from you description if you actually have 2 available drives. Check your drives and make certain you are not retaining a cleaning tape in one drive. Sam ----- Original Message ----- From: "^srpur Apalsteinsson" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, March 02, 2002 5:26 PM Subject: TSM 4.2.1.9 on Win NT, insufficient number of mount points Hi y4all I am installing TSM 4.2.1.9 on Win NT, I have a Dell PowerVault 128T library. My problem is that when migrating from disk to tape I get this right away, ANR0984I Process 28 for MIGRATION started in the BACKGROUND at 23:20:49. ANR1000I Migration process 28 started for storage pool DISKPOOL. ANR1134W Migration terminated for storage pool DISKPOOL - insufficient number of mount points available for removable media. ANR0985I Process 28 for MIGRATION running in the BACKGROUND completed with completion state FAILURE at 23:20:49. ANR1002I Migration for storage pool DISKPOOL will be retried in 60 seconds. ANR1003I Migration retry delay ended; checking migration status for storage pool DISKPOOL. However im able to label and checkin volumes without any problems I have changed the mount limit from drives to 2 (update dev ltoclass1 libr=lb0.0.0.2 devtype=lto mountlimit=2). That changed nothing My feeling is that im overlooking somthing in the config of the library or drives I also have a newer version of firmware then the one tested with TSM. Would changing OS4s do anything, go to W2K? Best regards ^srpur Apalsteinsson MCSE, MCP+I Margmiplun Internet, Fyrirtfkja~jsnusta Supurlandsbraut 4 105, Reykjavmk Smmi 575 7000 e-mail: [EMAIL PROTECTED] www.mi.is
