Yeah, one nice thing about ePMPs, is that you can always access them (from the ethernet port) on 169.254.1.1.
On Mon, Nov 12, 2018 at 9:18 AM Josh Luthman <j...@imaginenetworksllc.com> wrote: > I have always done SSH from RouterOS. If you made a gateway mistake you > don't need to do anything else, but if you did a bad IP you can just use > static ARP and 169.254.1.1 (or add a similar bad IP). > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Mon, Nov 12, 2018 at 9:06 AM, Joe Novak <jno...@lrcomm.com> wrote: > >> Same here. It for sure worked one or two versions back.. I mucked a >> gateway and had to fix it via mac telnet. >> >> On Sun, Nov 11, 2018 at 8:46 PM Josh Luthman <j...@imaginenetworksllc.com> >> wrote: >> >>> Well I can't mac-telnet to a 3.5.1 on the eth port...wonder why... >>> >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> On Fri, Nov 9, 2018 at 5:43 PM, Mathew Howard <mhoward...@gmail.com> >>> wrote: >>> >>>> It seems to only work from the ethernet side on SMs. I tried it on a >>>> link between two of our towers (I have access to Mikrotiks on both ends of >>>> the link), and I can mac-telnet to the SM from the Mikrotik that's local to >>>> it, but I can't on the one on the other end of the link. The AP works from >>>> both Mikrotiks. >>>> >>>> Also, I think mac-telnet was a fairly recent addition, 3.3 probably >>>> doesn't support it. >>>> >>>> On Fri, Nov 9, 2018 at 3:47 PM Josh Luthman < >>>> j...@imaginenetworksllc.com> wrote: >>>> >>>>> You CAN mac-telnet to eth ports? To an AP? I can't get that to work >>>>> myself. What versions are you able to make work? >>>>> >>>>> >>>>> Josh Luthman >>>>> Office: 937-552-2340 >>>>> Direct: 937-552-2343 >>>>> 1100 Wayne St >>>>> Suite 1337 >>>>> Troy, OH 45373 >>>>> >>>>> On Fri, Nov 9, 2018 at 2:38 PM, Justin Marshal <just...@pdmnet.net> >>>>> wrote: >>>>> >>>>>> Yeah, I would think the same thing. If I’m able to get the CDP/LLDP >>>>>> packets I should be able to mac-telnet to it. >>>>>> >>>>>> >>>>>> >>>>>> I’m able to mac-telnet to the ethernet side, just not the wlan side. >>>>>> >>>>>> I can mac-telnet to an SM from a routerOS device at the customer’s >>>>>> location but I would like to be able to reach it from the tower through >>>>>> the >>>>>> wlan. >>>>>> >>>>>> It’s almost like mac-telnet is enabled on the ethernet interface and >>>>>> not the wlan interface, even though LLDP/CDP get sent for both >>>>>> interfaces. >>>>>> >>>>>> I wish changing the password helped, but it doesn’t seem to make a >>>>>> difference. >>>>>> >>>>>> >>>>>> >>>>>> I do appreciate the suggestions… >>>>>> >>>>>> >>>>>> >>>>>> *From:* AF <af-boun...@af.afmug.com> *On Behalf Of * Josh Luthman >>>>>> *Sent:* Friday, November 09, 2018 1:52 PM >>>>>> >>>>>> *To:* AnimalFarm Microwave Users Group <af@af.afmug.com> >>>>>> *Subject:* Re: [AFMUG] mac telnet from RouterOS to an ePMP, has >>>>>> anyone ever gotten this working? >>>>>> >>>>>> >>>>>> >>>>>> If you're getting those ARP layer 2 packets and can ping it, surely >>>>>> you have to be able to mac-telnet (unless the application denies you). >>>>>> Defaults should work once you've changed the password according to the >>>>>> GUI. >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> Josh Luthman >>>>>> Office: 937-552-2340 >>>>>> Direct: 937-552-2343 >>>>>> 1100 Wayne St >>>>>> Suite 1337 >>>>>> Troy, OH 45373 >>>>>> >>>>>> >>>>>> >>>>>> On Fri, Nov 9, 2018 at 11:10 AM, Justin Marshal <just...@pdmnet.net> >>>>>> wrote: >>>>>> >>>>>> Me either >>>>>> >>>>>> >>>>>> >>>>>> Wondering if there’s a setting that I’m overlooking in the AP that >>>>>> keeps it from happening (SM Isolation, etc) >>>>>> >>>>>> >>>>>> >>>>>> *From:* AF <af-boun...@af.afmug.com> *On Behalf Of *Josh Luthman >>>>>> *Sent:* Friday, November 09, 2018 11:05 AM >>>>>> *To:* AnimalFarm Microwave Users Group <af@af.afmug.com> >>>>>> >>>>>> >>>>>> *Subject:* Re: [AFMUG] mac telnet from RouterOS to an ePMP, has >>>>>> anyone ever gotten this working? >>>>>> >>>>>> >>>>>> >>>>>> I can't get into any SM from the wireless side (the MAC we see in >>>>>> neighbors is wireless). >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> Josh Luthman >>>>>> Office: 937-552-2340 >>>>>> Direct: 937-552-2343 >>>>>> 1100 Wayne St >>>>>> Suite 1337 >>>>>> Troy, OH 45373 >>>>>> >>>>>> >>>>>> >>>>>> On Fri, Nov 9, 2018 at 10:58 AM, Justin Marshal <just...@pdmnet.net> >>>>>> wrote: >>>>>> >>>>>> Hmm… >>>>>> >>>>>> >>>>>> >>>>>> I’m only seeing one mac address for each SM. It’s seeing the >>>>>> wireless MAC address… >>>>>> >>>>>> This is directly from a Mikrotik at the tower, through a bridged AP, >>>>>> to a bridged SM. >>>>>> >>>>>> >>>>>> >>>>>> I do see 2 MAC Addresses for our AP’s, but I’m trying to MAC telnet >>>>>> into the SM’s. When doing a mac-telnet to the AP, it works fine when >>>>>> connecting to the wireless MAC even though I’m coming in through the >>>>>> ethernet side of things (weird) >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> I tried changing the MAC to the ethernet interface of the SM just to >>>>>> say I tried it but that didn’t work either…. >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> Thanks for the suggestion >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> *From:* AF <af-boun...@af.afmug.com> *On Behalf Of *Mathew Howard >>>>>> *Sent:* Friday, November 09, 2018 10:41 AM >>>>>> *To:* AFMUG <af@af.afmug.com> >>>>>> *Subject:* Re: [AFMUG] mac telnet from RouterOS to an ePMP, has >>>>>> anyone ever gotten this working? >>>>>> >>>>>> >>>>>> >>>>>> It works fine for me, but it looks like you need to use the wireless >>>>>> MAC address, and not the ethernet MAC (this is on an AP in bridge mode, >>>>>> an >>>>>> SM in router mode would be different, I assume). I initially just right >>>>>> clicked on the MAC in the neighbor list in Winbox, and selected MAC, and >>>>>> it >>>>>> connected fine... after that, I realized both MAC addresses were there, >>>>>> so >>>>>> I tried the other one, and it just disconnected. >>>>>> >>>>>> >>>>>> >>>>>> On Fri, Nov 9, 2018 at 9:28 AM Justin Marshal <just...@pdmnet.net> >>>>>> wrote: >>>>>> >>>>>> Hi, >>>>>> >>>>>> >>>>>> >>>>>> I'm trying to get mac-telnet to work from a RouterOS device to an >>>>>> ePMP and it doesn't seem to be working. >>>>>> >>>>>> >>>>>> >>>>>> It immediately closes the connection as soon as i enter the password. >>>>>> >>>>>> When i hold my mouse over the tooltip on the setting for mac-telnet >>>>>> under configuration->system, it tells me that I need to change the >>>>>> password >>>>>> for it to work. I have done that and I am still getting the same >>>>>> results. >>>>>> >>>>>> >>>>>> >>>>>> Has anybody ever gotten mac-telnet to work from a RoterOS device >>>>>> connecting to an ePMP and if so, what is the trick? >>>>>> >>>>>> >>>>>> >>>>>> Thanks >>>>>> >>>>>> -- >>>>>> AF mailing list >>>>>> AF@af.afmug.com >>>>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>>>> >>>>>> >>>>>> -- >>>>>> AF mailing list >>>>>> AF@af.afmug.com >>>>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> AF mailing list >>>>>> AF@af.afmug.com >>>>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> AF mailing list >>>>>> AF@af.afmug.com >>>>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>>>> >>>>>> >>>>> -- >>>>> AF mailing list >>>>> AF@af.afmug.com >>>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>>> >>>> >>>> -- >>>> AF mailing list >>>> AF@af.afmug.com >>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>> >>>> >>> -- >>> AF mailing list >>> AF@af.afmug.com >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com