Weird... all of the APs I've tried have worked from both sides. You do have to use the wireless MAC (whether you're connected from the ethernet or the wireless side), but other than that, they just connected like you would expect.
On Mon, Nov 12, 2018 at 10:42 AM Josh Luthman <j...@imaginenetworksllc.com> wrote: > AP. Bridge mode. > > Looks like on by default to me, too. > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Mon, Nov 12, 2018 at 10:52 AM, Mathew Howard <mhoward...@gmail.com> > wrote: > >> SM or AP? Is it in router mode or bridge mode? >> I've only tried it on radios that are in bridge mode, and I had to use >> the wireless MAC, so it wouldn't surprise me if it doesn't work in router >> or NAT mode. >> You can disable mac-telnet, but it seems to be turned on on all of ours, >> and I never enabled it, so I assume it's on by default. >> >> On Sun, Nov 11, 2018 at 8:46 PM Josh Luthman <j...@imaginenetworksllc.com> >> wrote: >> >>> Well I can't mac-telnet to a 3.5.1 on the eth port...wonder why... >>> >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> On Fri, Nov 9, 2018 at 5:43 PM, Mathew Howard <mhoward...@gmail.com> >>> wrote: >>> >>>> It seems to only work from the ethernet side on SMs. I tried it on a >>>> link between two of our towers (I have access to Mikrotiks on both ends of >>>> the link), and I can mac-telnet to the SM from the Mikrotik that's local to >>>> it, but I can't on the one on the other end of the link. The AP works from >>>> both Mikrotiks. >>>> >>>> Also, I think mac-telnet was a fairly recent addition, 3.3 probably >>>> doesn't support it. >>>> >>>> On Fri, Nov 9, 2018 at 3:47 PM Josh Luthman < >>>> j...@imaginenetworksllc.com> wrote: >>>> >>>>> You CAN mac-telnet to eth ports? To an AP? I can't get that to work >>>>> myself. What versions are you able to make work? >>>>> >>>>> >>>>> Josh Luthman >>>>> Office: 937-552-2340 >>>>> Direct: 937-552-2343 >>>>> 1100 Wayne St >>>>> Suite 1337 >>>>> Troy, OH 45373 >>>>> >>>>> On Fri, Nov 9, 2018 at 2:38 PM, Justin Marshal <just...@pdmnet.net> >>>>> wrote: >>>>> >>>>>> Yeah, I would think the same thing. If I’m able to get the CDP/LLDP >>>>>> packets I should be able to mac-telnet to it. >>>>>> >>>>>> >>>>>> >>>>>> I’m able to mac-telnet to the ethernet side, just not the wlan side. >>>>>> >>>>>> I can mac-telnet to an SM from a routerOS device at the customer’s >>>>>> location but I would like to be able to reach it from the tower through >>>>>> the >>>>>> wlan. >>>>>> >>>>>> It’s almost like mac-telnet is enabled on the ethernet interface and >>>>>> not the wlan interface, even though LLDP/CDP get sent for both >>>>>> interfaces. >>>>>> >>>>>> I wish changing the password helped, but it doesn’t seem to make a >>>>>> difference. >>>>>> >>>>>> >>>>>> >>>>>> I do appreciate the suggestions… >>>>>> >>>>>> >>>>>> >>>>>> *From:* AF <af-boun...@af.afmug.com> *On Behalf Of * Josh Luthman >>>>>> *Sent:* Friday, November 09, 2018 1:52 PM >>>>>> >>>>>> *To:* AnimalFarm Microwave Users Group <af@af.afmug.com> >>>>>> *Subject:* Re: [AFMUG] mac telnet from RouterOS to an ePMP, has >>>>>> anyone ever gotten this working? >>>>>> >>>>>> >>>>>> >>>>>> If you're getting those ARP layer 2 packets and can ping it, surely >>>>>> you have to be able to mac-telnet (unless the application denies you). >>>>>> Defaults should work once you've changed the password according to the >>>>>> GUI. >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> Josh Luthman >>>>>> Office: 937-552-2340 >>>>>> Direct: 937-552-2343 >>>>>> 1100 Wayne St >>>>>> Suite 1337 >>>>>> Troy, OH 45373 >>>>>> >>>>>> >>>>>> >>>>>> On Fri, Nov 9, 2018 at 11:10 AM, Justin Marshal <just...@pdmnet.net> >>>>>> wrote: >>>>>> >>>>>> Me either >>>>>> >>>>>> >>>>>> >>>>>> Wondering if there’s a setting that I’m overlooking in the AP that >>>>>> keeps it from happening (SM Isolation, etc) >>>>>> >>>>>> >>>>>> >>>>>> *From:* AF <af-boun...@af.afmug.com> *On Behalf Of *Josh Luthman >>>>>> *Sent:* Friday, November 09, 2018 11:05 AM >>>>>> *To:* AnimalFarm Microwave Users Group <af@af.afmug.com> >>>>>> >>>>>> >>>>>> *Subject:* Re: [AFMUG] mac telnet from RouterOS to an ePMP, has >>>>>> anyone ever gotten this working? >>>>>> >>>>>> >>>>>> >>>>>> I can't get into any SM from the wireless side (the MAC we see in >>>>>> neighbors is wireless). >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> Josh Luthman >>>>>> Office: 937-552-2340 >>>>>> Direct: 937-552-2343 >>>>>> 1100 Wayne St >>>>>> Suite 1337 >>>>>> Troy, OH 45373 >>>>>> >>>>>> >>>>>> >>>>>> On Fri, Nov 9, 2018 at 10:58 AM, Justin Marshal <just...@pdmnet.net> >>>>>> wrote: >>>>>> >>>>>> Hmm… >>>>>> >>>>>> >>>>>> >>>>>> I’m only seeing one mac address for each SM. It’s seeing the >>>>>> wireless MAC address… >>>>>> >>>>>> This is directly from a Mikrotik at the tower, through a bridged AP, >>>>>> to a bridged SM. >>>>>> >>>>>> >>>>>> >>>>>> I do see 2 MAC Addresses for our AP’s, but I’m trying to MAC telnet >>>>>> into the SM’s. When doing a mac-telnet to the AP, it works fine when >>>>>> connecting to the wireless MAC even though I’m coming in through the >>>>>> ethernet side of things (weird) >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> I tried changing the MAC to the ethernet interface of the SM just to >>>>>> say I tried it but that didn’t work either…. >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> Thanks for the suggestion >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> *From:* AF <af-boun...@af.afmug.com> *On Behalf Of *Mathew Howard >>>>>> *Sent:* Friday, November 09, 2018 10:41 AM >>>>>> *To:* AFMUG <af@af.afmug.com> >>>>>> *Subject:* Re: [AFMUG] mac telnet from RouterOS to an ePMP, has >>>>>> anyone ever gotten this working? >>>>>> >>>>>> >>>>>> >>>>>> It works fine for me, but it looks like you need to use the wireless >>>>>> MAC address, and not the ethernet MAC (this is on an AP in bridge mode, >>>>>> an >>>>>> SM in router mode would be different, I assume). I initially just right >>>>>> clicked on the MAC in the neighbor list in Winbox, and selected MAC, and >>>>>> it >>>>>> connected fine... after that, I realized both MAC addresses were there, >>>>>> so >>>>>> I tried the other one, and it just disconnected. >>>>>> >>>>>> >>>>>> >>>>>> On Fri, Nov 9, 2018 at 9:28 AM Justin Marshal <just...@pdmnet.net> >>>>>> wrote: >>>>>> >>>>>> Hi, >>>>>> >>>>>> >>>>>> >>>>>> I'm trying to get mac-telnet to work from a RouterOS device to an >>>>>> ePMP and it doesn't seem to be working. >>>>>> >>>>>> >>>>>> >>>>>> It immediately closes the connection as soon as i enter the password. >>>>>> >>>>>> When i hold my mouse over the tooltip on the setting for mac-telnet >>>>>> under configuration->system, it tells me that I need to change the >>>>>> password >>>>>> for it to work. I have done that and I am still getting the same >>>>>> results. >>>>>> >>>>>> >>>>>> >>>>>> Has anybody ever gotten mac-telnet to work from a RoterOS device >>>>>> connecting to an ePMP and if so, what is the trick? >>>>>> >>>>>> >>>>>> >>>>>> Thanks >>>>>> >>>>>> -- >>>>>> AF mailing list >>>>>> AF@af.afmug.com >>>>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>>>> >>>>>> >>>>>> -- >>>>>> AF mailing list >>>>>> AF@af.afmug.com >>>>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> AF mailing list >>>>>> AF@af.afmug.com >>>>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> AF mailing list >>>>>> AF@af.afmug.com >>>>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>>>> >>>>>> >>>>> -- >>>>> AF mailing list >>>>> AF@af.afmug.com >>>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>>> >>>> >>>> -- >>>> AF mailing list >>>> AF@af.afmug.com >>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>> >>>> >>> -- >>> AF mailing list >>> AF@af.afmug.com >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
