I always thought they were overly complicated.
If it's a new unit, tech support will help you set it up. You'll
probably never have to look at it again so IMO just let them take care
of it.
-Adam
On 5/14/2019 5:42 PM, Trey Scarborough wrote:
Yes you will have to provision a service on them for it to pass traffic.
On 5/14/2019 1:46 PM, SmarterBroadband wrote:
Hi Caleb
Yes, done that. Admin status is up. Operational status is Down....
What else do I need? Ethernet Services? Service Points?
Adam
-----Original Message-----
From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Caleb Knauer
Sent: Tuesday, May 14, 2019 10:58 AM
To: AnimalFarm Microwave Users Group <af@af.afmug.com>
Subject: Re: [AFMUG] Ceragon IP-20C SFP
Go to the Interface Manager and turn on/off GE ports that you want to
use.
1 is the copper port, 2 is the first sfp cage, 3 is the sfp cage that
may or
may not be used for MIMO depending on HW model so probably stick with
port
2. It's under the System tab or something on top of the tree, don't
have
one handy to look.
On Tue, May 14, 2019 at 12:49 PM SmarterBroadband <li...@sbb.net> wrote:
I am trying to get a fiber SFP working in my IP-20C. I am licensed for
two GbE ports. I must be missing something.
Can anyone list the steps to get this working?
Thanks
Adam
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
