It’s got an sfp in it

On Wed, Jan 22, 2020 at 1:57 PM Adam Moffett <dmmoff...@gmail.com> wrote:

> Copper.  3000L doesn't have fiber.
> On 1/22/2020 4:55 PM, Nate Burke wrote:
>
> Are you seeing Ethernet problems with fiber connections as well, or just
> the copper?  We put up an EPMP 3000 early last year.  It had Ethernet
> problems for about the first 3 or 4 weeks of putting it up, but has seemed
> fine since then.  This was on Copper connection.  I was just having
> Ethernet problems in general, 1g, 100m, 10m.  It would instantly negotiate
> the speed, but have lots of packet loss.  I attributed it to corrosion on
> the Cat5 pins that summer temperature fluctuations cleared up.
>
>
> On 1/22/2020 2:45 PM, Adam Moffett wrote:
>
> It was 1 link at 0.9 mile on a +30 EIRP DFS band.
>
> Just a test.  Test failed.
>
>
> On 1/22/2020 3:41 PM, Ryan Ray wrote:
>
> Technically you wouldn't see any performance gains over a 2000 unless
> you're hitting 256qam.
>
> What's the distance of the links?
>
> On Wed, Jan 22, 2020 at 11:19 AM Matt Hoppes <
> mattli...@rivervalleyinternet.net> wrote:
>
>> No but Chris and I had a theory it was hot heat related... that kills
>> that theory.
>>
>> On 1/22/20 1:17 PM, Adam Moffett wrote:
>> > Binghamton, NY just north of you.  Usually in the 30's this time of
>> > year, but it's been more like in the teens for several days.
>> >
>> > Did you see a temperature correlation?
>> >
>> >
>> > On 1/22/2020 12:49 PM, Matt Hoppes wrote:
>> >> I purchased a bunch of ePMP3000 (not L) and have honestly had nothing
>> >> but issues with them since trying to deploy... including multiple
>> >> instances at multiple sites with the inability to get Gig to link...
>> >> but at the office it's fine... swap to a Ubiquiti AC radio and it's a
>> >> Gig on the tower.
>> >>
>> >> Out of curiosity what temperature are you at wherever you are right
>> now?
>> >>
>> >> On 1/22/20 12:46 PM, Adam Moffett wrote:
>> >>> On the first unit we tried yeah.  GigE worked in the office, but on
>> >>> the tower it would only run at 100BaseT.  Our guys fought with it for
>> >>> a couple of days. Brought it back to the office and it did a gig in
>> >>> the office no problem.  I assume it's related to the cable length,
>> >>> but maybe some other factor matters.  The switch at the tower was a
>> >>> Mikrotik CRS 2xx of some type.  Not sure if that matters.
>> >>>
>> >>> In any case, the second unit we plugged in at the tower went right to
>> >>> a gig no problem.....except that one died today after being in the
>> >>> air for 4 days.
>> >>>
>> >>> Maybe I just rolled snake eyes or something, but it has me wondering
>> >>> about reliability.
>> >>>
>> >>> The price and feature set is right so I had big plans for these. I
>> >>> probably won't try them again unless something changes.
>> >>>
>> >>> -Adam
>> >>>
>> >>>
>> >>> On 1/22/2020 12:39 PM, Matt Hoppes wrote:
>> >>>> WAIT WAIT WAIT.... You ALSO are having issues linking at Gigabit?
>> >>>> That's interesting, because myself and someone else are also having
>> >>>> this issue and Cambium has sworn until they are blue in the face
>> >>>> there is no issue.
>> >>>>
>> >>>> On 1/22/20 11:54 AM, Adam Moffett wrote:
>> >>>>> So I tried an ePMP 3000L.
>> >>>>>
>> >>>>> Real world performance is ultimately about the same as ePMP 2000.
>> >>>>> QoS doesn't work properly.  SM was re registering with a pretty
>> >>>>> minimal amount of noise.  I had 27 DL SNR and 17 UL SNR on a DFS
>> >>>>> band......it's not going to get a lot better than that where I am.
>> >>>>> Not in real life anyway.
>> >>>>>
>> >>>>> First AP wouldn't link at 1Gig on a long cable (but would on a
>> >>>>> short cable).  Tried a second AP and that one worked at 1Gig, but
>> >>>>> then died 4 days later.
>> >>>>>
>> >>>>> I got a lot of mileage out of the ePMP 2000 and the PMP450, but
>> >>>>> this new product does not currently impress.   It's sort of a
>> >>>>> little bit shitty in fact.
>> >>>>>
>> >>>>> Maybe they'll bake out some of the issues later.
>> >>>>>
>> >>>>>
>> >>>>>
>>
>> --
>> AF mailing list
>> AF@af.afmug.com
>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>>
>
>
>
> --
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to