We have one. Very happy we purchased it.
Going to be great with CBRS eNodeB alignments and registration. We use on dish alignments and it works really well. Adam From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Steve Jones Sent: Wednesday, February 19, 2020 8:50 AM To: AnimalFarm Microwave Users Group <af@af.afmug.com> Subject: [AFMUG] Advice on spending I got approval from the boss to order a smart aligner. Ive been looking at this for a while, particularly with the need for accuracy in CBRS. Not looking to use it at customer sites, just backhauls and access points. We have historically never been verifiably accurate on azimuths, probably rolled out pretty bad too. We have had issues with contractors not installing sites to spec, and having to go back up to turn radios/adjust tilt, etc. This will be handy for this year, we are dropping in at least 40 new access points and 3 or 5 new licensed links in the next few months. but then the tool will sit Boss said the worst thing to me, "get it if you think its necessary". If it were a $1k tool it wouldnt be a question bet we are looking at almost 7k on the kit. It meets my accuracy needs, but I almost wonder if the convenience outweighs the necessary. ant his is over half the cost of a licensed link. Knowing my numbers are right in propagation tools holds a lot of value. saving maybe an hour getting a tight link aligned here and there offsets some cost. You old timers, is this a justifiable expenditure based on your experience?
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com