We have used Netrix, Centracomm, and Walker & Associates at various times. Juniper tries to push you to the local territory VAR which usually just pisses me off. You don’t have to buy from the local VAR but you might have to work a little bit on it. Juniper tries to manage the channel a lot too much.
Mark > On Apr 14, 2020, at 2:35 PM, Gilbert Gutierrez > <mailing-li...@phxinternet.com> wrote: > > I will look into the MX204. Do you have a recommended reseller? I used to > have issues with the old 7200vxr multiservice platform running ATM circuits. > I don't remember as many issues with the old 7500 series boxes. They did like > power though. > > Gilbert > > On Tue, Apr 14, 2020 at 11:30 AM Mark Radabaugh <m...@amplex.net > <mailto:m...@amplex.net>> wrote: > I would suggest looking seriously at the MX204 platform. New with licensing > it’s under 20k (negotiate hard and you can get it closer to 15k). Very > powerful without the power, space, and line card expense of the MX80. The > only real drawback to them is they are a single routing engine rather than > dual. Having said that I can’t recall any time that we have had a routing > engine fail on a MX series router. Used to happen all the time on our Cisco > 7500’s - but we are talking ancient history there. > > We run a pair of MX204’s now, though we used a single one for a long time. > > Mark > > > On Apr 14, 2020, at 2:14 PM, Gilbert Gutierrez > > <mailing-li...@phxinternet.com <mailto:mailing-li...@phxinternet.com>> > > wrote: > > > > I am looking to move away from Microtik on my edge. I have two > > CCR1072-1G-8s+ routers and have had stability problems with random reboots > > over the last year of using them. I am thinking of the Juniper MX80 > > platform but do not know anything about their licensing (looking at used > > ones that I can get for about $5k). I also do not know what other options > > are out there. > > > > I am needing 10G ports > > Support for OSPF > > Support for BGP full routes from multiple carriers > > MPLS would be nice > > Support VLANs > > Support for various MTU sizes > > > > Thank you, > > Gilbert > > -- > > AF mailing list > > AF@af.afmug.com <mailto:AF@af.afmug.com> > > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > <http://af.afmug.com/mailman/listinfo/af_af.afmug.com> > > > -- > AF mailing list > AF@af.afmug.com <mailto:AF@af.afmug.com> > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > <http://af.afmug.com/mailman/listinfo/af_af.afmug.com> > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
