unless those have banding slits cut in them, he may want to put some mattresses on the ground to catch the radios when the bands tear.
That being said, assuming hes using the 3/4-1 inch bands and the style we used to use, yes, you hammer the clamps. its kind of like kneading dough, you have to roll them with the hammer. I havent used that tool in like 8 years though On Wed, Apr 22, 2020 at 11:46 AM <ch...@wbmfg.com> wrote: > This is what he is installing: > https://www.mccowntech.com/product/heavy-duty-pole-mount-1/ > > *From:* Carl Peterson > *Sent:* Wednesday, April 22, 2020 10:37 AM > *To:* AnimalFarm Microwave Users Group > *Subject:* Re: [AFMUG] Stainless banding - Time Sensitive Question > > If he can post a quick video of what he is doing I'm sure we could > critique it. I haven't done it myself in a decade but all the gear I put > up on steel poles 10 years ago is still up and hasn't moved. Which of your > brackets is he installing? Only thing I can think is the band isn't > slipping through slots in the bracket and thus isn't getting tightened > properly. > > > > On Wed, Apr 22, 2020 at 11:33 AM <ch...@wbmfg.com> wrote: > >> Yes, he has a banding tool. >> >> *From:* Carl Peterson >> *Sent:* Wednesday, April 22, 2020 10:30 AM >> *To:* AnimalFarm Microwave Users Group >> *Subject:* Re: [AFMUG] Stainless banding - Time Sensitive Question >> >> Slip? I'm assuming he has a banding tool? >> >> https://www.youtube.com/watch?v=3nLfRYjlnKU >> >> On Wed, Apr 22, 2020 at 11:26 AM <ch...@wbmfg.com> wrote: >> >>> Mitch Koep is in the field attempting to installing one of my pole >>> mounts onto a steel monopole with stainless bands. I personally have never >>> used bands on a steel pole. >>> >>> Any tips or pointers? Does he hammer the clip flat after bending the >>> strap? He is trying it down at the base before hanging a bunch of >>> expensive radios way up in the air and is having the strap slip. >>> >>> This is fairly time sensitive. I am sure Mitch would welcome a call if >>> any of you have some experience with this. I suggested getting some rubber >>> to put under the mount to increase friction. >>> -- >>> AF mailing list >>> AF@af.afmug.com >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >> >> >> -- >> >> Carl Peterson >> >> *PORT NETWORKS* >> >> 401 E Pratt St, Ste 2553 >> >> Baltimore, MD 21202 >> >> (410) 637-3707 >> ------------------------------ >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > > > -- > > Carl Peterson > > *PORT NETWORKS* > > 401 E Pratt St, Ste 2553 > > Baltimore, MD 21202 > > (410) 637-3707 > > ------------------------------ > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
