You a funny guy eh.
On Thu, Aug 27, 2020 at 2:13 PM <ch...@wbmfg.com> wrote: > You usta could get resisters in Canada. > > *From:* Sam Lambie > *Sent:* Thursday, August 27, 2020 2:02 PM > *To:* AnimalFarm Microwave Users Group > *Subject:* Re: [AFMUG] [ External ] Audio tune 450i SMs? > > I'll find out tomorrow. I just made a cable without resistors. I can't > hear shit in the high frequency tones and wear hearing aids, so this will > be a good test. > > On Thu, Aug 27, 2020 at 1:11 PM Matt Mangriotis via AF <af@af.afmug.com> > wrote: > >> The resistors change the frequency of the tone. In fact, some people may >> prefer the tone without any resistors at all… and sometimes (perhaps >> inadvertently) the tone frequency changes with updates to the software >> revision. >> >> >> >> The team does test this feature, but I can’t say that I have first hand >> experience using it with a cable with that specific value resistor… so >> couldn’t tell you what it sounds like on the currently released version of >> software. >> >> >> >> *From:* AF <af-boun...@af.afmug.com> *On Behalf Of *Ken Hohhof >> *Sent:* Thursday, August 27, 2020 1:58 PM >> *To:* 'AnimalFarm Microwave Users Group' <af@af.afmug.com> >> *Subject:* Re: [AFMUG] [ External ] Audio tune 450i SMs? >> >> >> >> I bought one 450i SM by mistake once, I somehow thought the 3 GHz SM with >> the integral panel was discontinued when the 450b came out. And I built >> one of those stupid cables, including the 220 ohm resistors (which I >> suspect aren’t really needed). Have you tried to buy resistors lately? No >> more Radio Shacks, Frys doesn’t carry components anymore, I found some in >> the discontinued items bin at MicroCenter. >> >> >> >> Bottom line, when I realized I would also need a 48V POE, I put that SM >> on the shelf where it still sits today. I’m not sure why you’d want one. >> On top of everything else, it’s very expensive. I think its claim to fame >> is the dynamically tuned front end filter, which I guess would help if you >> had extremely high adjacent channel interference. >> >> >> >> I should really put it on eBay or something. >> >> >> >> *From:* AF <af-boun...@af.afmug.com> *On Behalf Of *Matt Mangriotis via >> AF >> *Sent:* Thursday, August 27, 2020 12:38 PM >> *To:* AnimalFarm Microwave Users Group <af@af.afmug.com> >> *Cc:* Matt Mangriotis <matt.mangrio...@cambiumnetworks.com> >> *Subject:* Re: [AFMUG] [ External ] Audio tune 450i SMs? >> >> >> >> Sam – Please see this forum post… >> >> >> >> https://community.cambiumnetworks.com/t/pmp450i-sm-alignment-tones/54898 >> <https://nam05.safelinks.protection.outlook.com/?url=https%3A%2F%2Fcommunity.cambiumnetworks.com%2Ft%2Fpmp450i-sm-alignment-tones%2F54898&data=02%7C01%7Cmatt.mangriotis%40cambiumnetworks.com%7C7bf06b2dabba4e62576b08d84abb44ea%7C0e263e36340946228ac818d993e76eb6%7C0%7C1%7C637341515507837732&sdata=hWLd2jywJmoe4OtzpMWHsFupqHwciHIFsmWA%2BX8GTAI%3D&reserved=0> >> >> >> >> Matt >> >> >> >> *From:* AF <af-boun...@af.afmug.com> *On Behalf Of *Sam Lambie >> *Sent:* Thursday, August 27, 2020 12:27 PM >> *To:* AnimalFarm Microwave Users Group <af@af.afmug.com> >> *Subject:* [ External ] [AFMUG] Audio tune 450i SMs? >> >> >> >> I just installed my 1st 450i sm and am stumped on how to tune with an >> audio speaker like the old 450 and 450bs. >> >> >> >> What am I missing? >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > > > -- > -- > *Sam Lambie* > Taosnet Wireless Tech. > 575-758-7598 Office > www.Taosnet.com <http://www.newmex.com> > > ------------------------------ > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- -- *Sam Lambie* Taosnet Wireless Tech. 575-758-7598 Office www.Taosnet.com <http://www.newmex.com>
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
