with any volume you want to go to a per minute/per item rate, then you reap the profits instead of the guy offering you $8 flat rate...
On Wed, Sep 23, 2020 at 1:32 PM <ch...@wbmfg.com> wrote: > With LNP and direct PSAP and unlimited LD etc? > > *From:* TJ Trout > *Sent:* Wednesday, September 23, 2020 2:27 PM > *To:* AnimalFarm Microwave Users Group > *Subject:* Re: [AFMUG] OT sip question > > I would have to assume doing with a national wholesale voip provider would > be a fraction of the cost compared to a $8 flat rate per line. > > On Wed, Sep 23, 2020 at 1:21 PM Lewis Bergman <lewis.berg...@gmail.com> > wrote: > >> Just as a clarification, FusionPBX is freeswitch not asterisk. >> >> On Wed, Sep 23, 2020 at 2:37 PM Daniel White <dwh...@atheral.com> wrote: >> >>> Having a direct connection for a SIP trunk is easy. Just put an Adtran >>> 904e or something else into the mix. For LNP you don't need to have the >>> switch on-net... just a device in the exchange for portability and a T-1 or >>> something else. >>> >>> To answer your question... CallerID manipulation is easy right now. In >>> 9ish months once STIR/SHAKEN is a thing... you may run into issues getting >>> calls signed with a TN for CallerID that isn't on that providers service. >>> >>> So yes... to answer your question it is easy to do on an Asterisk based >>> system (FreePBX or FusionPBX for instance) but someone like Lewis and I >>> could save you a lot of trouble for certain. That and it is easy today... >>> but is going to be a lot more complicated next year. >>> >>> [image: photograph] >>> Daniel White >>> Co-Founder >>> phone: +1 (702) 470-2770 >>> direct: +1 (702) 470-2766 >>> >>> ch...@wbmfg.com >>> September 23, 2020 at 12:52 >>> The provider charges more for a “trunk”. >>> And Lewis, I already have this service set up through them for another >>> system >>> We have some unique LNP porting issues and really want the voip provider >>> to have a direct connection to us. >>> >>> *From:* Brian Webster >>> *Sent:* Wednesday, September 23, 2020 12:35 PM >>> *To:* 'AnimalFarm Microwave Users Group' >>> *Subject:* Re: [AFMUG] OT sip question >>> >>> >>> It’s been a while since I have done an asterisk config but you still >>> configure a SIP account much the same as you would for the ATA and it >>> becomes a trunk as I recall and then you do whatever you need to with it as >>> a single line trunk. Way back when I was learning it and playing I had >>> multiple providers for single lines and even an IAX line too. Then I could >>> use them as part of the dial plan and other features as to where it would >>> ring and dial out. >>> >>> >>> >>> Thank you, >>> >>> Brian Webster >>> >>> www.wirelessmapping.com >>> >>> >>> >>> *From:* AF [mailto:af-boun...@af.afmug.com] *On Behalf Of * >>> ch...@wbmfg.com >>> *Sent:* Wednesday, September 23, 2020 2:01 PM >>> *To:* af@af.afmug.com >>> *Subject:* [AFMUG] OT sip quiestion >>> >>> >>> >>> If I get a voip service from some random provider and I have a sip >>> device on my end, I am golden. Say an ATA connected to a pots phone. >>> >>> Now, if I want that number to appear inside an asterisk PBX but I don’t >>> want to buy a trunk, is there an easy way to do that? >>> ------------------------------ >>> -- >>> AF mailing list >>> AF@af.afmug.com >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> Brian Webster >>> September 23, 2020 at 12:35 >>> >>> It’s been a while since I have done an asterisk config but you still >>> configure a SIP account much the same as you would for the ATA and it >>> becomes a trunk as I recall and then you do whatever you need to with it as >>> a single line trunk. Way back when I was learning it and playing I had >>> multiple providers for single lines and even an IAX line too. Then I could >>> use them as part of the dial plan and other features as to where it would >>> ring and dial out. >>> >>> >>> >>> Thank you, >>> >>> Brian Webster >>> >>> www.wirelessmapping.com >>> >>> >>> >>> *From:* AF [mailto:af-boun...@af.afmug.com] *On Behalf Of * >>> ch...@wbmfg.com >>> *Sent:* Wednesday, September 23, 2020 2:01 PM >>> *To:* af@af.afmug.com >>> *Subject:* [AFMUG] OT sip quiestion >>> >>> >>> >>> If I get a voip service from some random provider and I have a sip >>> device on my end, I am golden. Say an ATA connected to a pots phone. >>> >>> Now, if I want that number to appear inside an asterisk PBX but I don’t >>> want to buy a trunk, is there an easy way to do that? >>> >>> >>> >>> -- >>> AF mailing list >>> AF@af.afmug.com >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >> >> >> -- >> Lewis Bergman >> 325-439-0533 Cell >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > ------------------------------ > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
