I know Forrest has got the DC shunts, but I don't think he has anything
for AC or Clamp on.
The Iotawatt looks interesting. How hard was it to setup? Do you just
create a cloud account and it automagically sends everything there?
On 12/16/2020 6:21 PM, Steve Jones wrote:
Forrest... has anyone seen forrest?
On Wed, Dec 16, 2020, 6:05 PM Zach Underwood <zunder1...@gmail.com
<mailto:zunder1...@gmail.com>> wrote:
While it does not support snmp they may work
https://iotawatt.com/# I use it with infuxdb and home assistant.
It will support up to 14 ct clamps.
On Wed, Dec 16, 2020, 6:12 PM Nate Burke <n...@blastcomm.com
<mailto:n...@blastcomm.com>> wrote:
Since the Demise of the UBNT MFI, what's out there for easy
current
monitoring for AC Circuits. Drop some clamps on wires at the
panel and
read them via SNMP.
I have an Accuenergy device on the Mains of the panel, but their
products seem to be more for mains applications, not individual
circuits. I don't really even care about voltage or power or
metering.
Really what I want to see is how often my Aircon unit cycles
on and
off. The unit isn't smart enough to tell me how often it
runs, and it
doesn't make enough extra load on the mains meter to see it
above the
normal draw. So I want to clamp a set of meters right on that
circuit
so I can see when it cycles the compressor on and off.
I'm still using MFI on another system, and it's still plugging
away and
giving me good data. So if UBNT was able to do it, I'm
guessing someone
else can do it on the cheap too.
--
AF mailing list
AF@af.afmug.com <mailto:AF@af.afmug.com>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com <mailto:AF@af.afmug.com>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
