Did forrest die? On Wed, Dec 16, 2020, 7:45 PM Chuck McCown via AF <af@af.afmug.com> wrote:
> Site monitor with a clamp on current transformer, > > Sent from my iPhone > > > On Dec 16, 2020, at 4:11 PM, Nate Burke <n...@blastcomm.com> wrote: > > > > Since the Demise of the UBNT MFI, what's out there for easy current > monitoring for AC Circuits. Drop some clamps on wires at the panel and > read them via SNMP. > > > > I have an Accuenergy device on the Mains of the panel, but their > products seem to be more for mains applications, not individual circuits. > I don't really even care about voltage or power or metering. Really what I > want to see is how often my Aircon unit cycles on and off. The unit isn't > smart enough to tell me how often it runs, and it doesn't make enough extra > load on the mains meter to see it above the normal draw. So I want to > clamp a set of meters right on that circuit so I can see when it cycles the > compressor on and off. > > > > I'm still using MFI on another system, and it's still plugging away and > giving me good data. So if UBNT was able to do it, I'm guessing someone > else can do it on the cheap too. > > > > -- > > AF mailing list > > AF@af.afmug.com > > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com