Sweet!
On Mon, Apr 19, 2021 at 5:59 AM Caleb Knauer <cknauer.li...@gmail.com> wrote: > FYI 450b is power polarity agnostic, so you don't need to swap pairs. > > On Sun, Apr 18, 2021 at 9:13 PM Sam Lambie <samtaos...@gmail.com> wrote: > > > > Hey all, > > > > I am running into some issues with a 450b PTP setup. The Slave is > running at 200' of cable and the radio powers up, but doesn't transmit. I > got it to talk to the BHM (450b) and toned in the signal at -58 on both > ends for a couple of days at one point then it fizzled out. Swapped channel > and frequencies, No connection. Spectrum scan on both sides shows a totally > clean channel in many spots, and I have tried them all. I swapped out the > radio and the same thing happened. So... I am thinking it's voltage drop > with the dinky 0.5 amp PSU. > > Does anyone make one that is 1-1.5 amps at 30vdc? > > I am going to take a 24vdc 1 amp power supply from a Ubiquiti radio and > swap pairs on the Ethernet cable to see if I can get it to work and prove > my theory. > > Has anyone ran into this situation? > > > > thanks, > > > > -- > > -- > > Sam Lambie > > Taosnet Wireless Tech. > > 575-758-7598 Office > > www.Taosnet.com > > -- > > AF mailing list > > AF@af.afmug.com > > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- -- *Sam Lambie* Taosnet Wireless Tech. 575-758-7598 Office www.Taosnet.com <http://www.newmex.com>
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
