These work great in this type of application if you can talk them into running fiber:
https://mikrotik.com/product/RBFTC11 <https://mikrotik.com/product/RBFTC11> If you have AC power at the remote site you can power your radio from the POE port. If you have to run fiber + power there are a lot of inexpensive DC/DC converters like these that will let you stuff 48V down the wire and get clean 24V at the far end: https://www.cui.com/catalog/dc-dc-converters/isolated?[0].sn=Package%20Type&[0].sv=DIN%20Rail Mark > On Sep 1, 2021, at 9:18 PM, James Howard <ja...@litewire.net> wrote: > > Is it a Wisconsin thing that you have a to have any wire that penetrates the > building “envelope” grounded within 20 feet of penetration to meet code? > Seems like if you have to ground it anyway within 20 feet of entry, put the > POE there and then they can have their extender wherever they want along the > rest of the run. > > From: AF <af-boun...@af.afmug.com> On Behalf Of Steve Jones > Sent: Wednesday, September 1, 2021 4:45 PM > To: AnimalFarm Microwave Users Group <af@af.afmug.com> > Subject: Re: [AFMUG] resistivity of cat5 > > all but the exterior cable run of maybe 12 feet. theyre extending their > building out and putting up another building in the current LOS > > On Wed, Sep 1, 2021 at 3:43 PM James Howard <ja...@litewire.net > <mailto:ja...@litewire.net>> wrote: > Just out of curiosity, if he can put a network rack at the midpoint, how much > of this is inside buildings? > > From: AF <af-boun...@af.afmug.com <mailto:af-boun...@af.afmug.com>> On Behalf > Of Steve Jones > Sent: Wednesday, September 1, 2021 12:26 PM > To: AnimalFarm Microwave Users Group <af@af.afmug.com > <mailto:af@af.afmug.com>> > Subject: Re: [AFMUG] resistivity of cat5 > > thats what i suggested trying first, customer wanted the extender, irritating > > he finally has caved now and will be putting a network rack in the midpoint > and is going to place a managed switch there instead of all this other > unsupportable cobbling. Sometimes we get a win. > > On Wed, Sep 1, 2021 at 11:55 AM Adam Moffett <dmmoff...@gmail.com > <mailto:dmmoff...@gmail.com>> wrote: > Maybe a dumb question, but has it already been tried without the extender? > > 400ft is beyond 100m, but not by all that much. It might just work without > any faffing around. > > > > On 9/1/2021 11:16 AM, Steve Jones wrote: > I have a customer fixed on using > https://i.mt.lv/cdn/product_files/GPeRqg_190928.pdf > <https://i.mt.lv/cdn/product_files/GPeRqg_190928.pdf> to extend his epmp f300 > radio run to 400+ feet. > if im calculating this right there will be about a 10v drop on the 24guage > cat5, taking the 30v down to 20. If it does manage to keep the radio powered > i see it burning out the poe circuit. > > hes fighting me on putting the cambium PSU at the midspan point and using his > own POE to power the extender. > > Ive been overruled about telling the customer no, so its happening, but I > want to make sure my math is correct > using https://www.rapidtables.com/calc/wire/voltage-drop-calculator.html > <https://www.rapidtables.com/calc/wire/voltage-drop-calculator.html> > 24guage, 30v, .5 amp, 400 feet shows 10v drop. but im not sure about the > resistivity field > > this is a guy who runs constant latency monitoring and initiates tickets on > every blip, so i see this radio move just becoming a nightmare with this > midspan extender in play > > > -- > AF mailing list > AF@af.afmug.com <mailto:AF@af.afmug.com> > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > <http://af.afmug.com/mailman/listinfo/af_af.afmug.com> > Total Control Panel > Login <https://portal.reflexion.net/login?domain=litewire.net> > To: ja...@litewire.net > <https://portal.reflexion.net/address-properties?aID=242260993&domain=litewire.net> > From: af-boun...@af.afmug.com <mailto:af-boun...@af.afmug.com> > You received this message because the domain afmug.com <http://afmug.com/> is > on your allow list. > > -- > AF mailing list > AF@af.afmug.com <mailto:AF@af.afmug.com> > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > <http://af.afmug.com/mailman/listinfo/af_af.afmug.com> > Total Control Panel > Login <https://portal.reflexion.net/login?domain=litewire.net> > To: ja...@litewire.net > <https://portal.reflexion.net/address-properties?aID=242260993&domain=litewire.net> > From: af-boun...@af.afmug.com <mailto:af-boun...@af.afmug.com> > You received this message because the domain afmug.com is on your allow list. > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com