You just need to have at least one active CPI, correct? I was assuming it doesn't need to be the same person that originally signed off on it. If you had to re-register everything everytime a CPI was replaced, that would... unpleasant.
On Wed, Feb 16, 2022 at 8:52 AM Josh Luthman <j...@imaginenetworksllc.com> wrote: > Just recertify, you have to have someone on staff with it. > > On Wed, Feb 16, 2022 at 9:05 AM <dmmoff...@gmail.com> wrote: > >> Interesting. I hadn’t thought about what happens when a certification >> expires. That will be a rude shock if it works that way. >> >> >> >> *From:* AF <af-boun...@af.afmug.com> *On Behalf Of *Steve Jones >> *Sent:* Tuesday, February 15, 2022 8:35 PM >> *To:* AnimalFarm Microwave Users Group <af@af.afmug.com> >> *Subject:* Re: [AFMUG] OT: CBRS >> >> >> >> If a cpi leaves and doesnt keep renewing then one day everybody >> disconnects. 5 yeats comes quick >> >> >> >> On Tue, Feb 15, 2022, 12:42 PM Mathew Howard <mhoward...@gmail.com> >> wrote: >> >> It kind of makes sense, because a CPI is really just supposed to be >> verifying that the install was done correctly. If somebody goes and messes >> with it later on, you can't really hold the CPI responsible for that, so >> there theoretically shouldn't be any ongoing liability, as long as you did >> the job right in the first place. There's less incentive for an employee to >> make sure they did everything right, if they aren't personally responsible >> for it. >> >> >> >> A CPI leaving the company shouldn't really have any impact on any >> existing CBSD's... I would think the CPI could even be a contractor, but I >> never actually took the CPI course, so I could be wrong... >> >> >> >> >> >> On Tue, Feb 15, 2022 at 11:46 AM Steve Jones <thatoneguyst...@gmail.com> >> wrote: >> >> I was hoping they had changed that dumb rule >> >> >> >> On Tue, Feb 15, 2022, 10:28 AM <dmmoff...@gmail.com> wrote: >> >> Exactly. They made a big point of the fact that you are personally >> responsible for accuracy of the data you put in. Not sure how a company >> CPI would fit with that. >> >> >> >> -Adam >> >> >> >> >> >> *From:* AF <af-boun...@af.afmug.com> *On Behalf Of *Josh Luthman >> *Sent:* Tuesday, February 15, 2022 10:35 AM >> *To:* AnimalFarm Microwave Users Group <af@af.afmug.com> >> *Subject:* Re: [AFMUG] OT: CBRS >> >> >> >> I mean I did and I'm horrible at tests. I did the Google test at >> Coursera. >> >> >> >> There simply can't and won't be a company CPI. If you leave the company >> then the company needs to recertify. >> >> >> >> On Tue, Feb 15, 2022 at 10:30 AM Steve Jones <thatoneguyst...@gmail.com> >> wrote: >> >> Were any of us really absorbing all that much when we did CPI? It was >> new, half of it wasnt even finalized, the course was too long and dry for >> the small volume of info. >> >> >> >> >> >> speaking of CPI, have they created a company CPI yet? ours is my name and >> if I transition from employee to contractor Im curious how that impacts the >> registered CBSDs >> >> >> >> On Tue, Feb 15, 2022 at 8:49 AM Josh Luthman <j...@imaginenetworksllc.com> >> wrote: >> >> It's like 90% of the class for your CPI, I mean clearly you weren't >> paying attention :P The requirement is to report the height and position. >> Every time. Every CPE, every AP. >> >> >> >> If it's operating under your NN license, which is almost >> certainly expired, you're operating illegally. >> >> >> >> If you're operating under CBRS it requires you to report every CPE. >> >> >> >> On Tue, Feb 15, 2022 at 7:55 AM Andy Trimmell <atrimm...@precisionds.com> >> wrote: >> >> I’m sitting here wondering how I missed this in CPI training. I believed >> that what was supposed to be “registered” was a CBSD which had specific >> height requirements and type which these units aren’t exceeding these >> specifications. Yes the product is Baicells. >> >> >> >> Anyone else here that uses Baicells gone down this road too with a >> similar assumption? >> >> >> >> >> >> >> >> *From:* AF [mailto:af-boun...@af.afmug.com] *On Behalf Of *Mathew Howard >> *Sent:* Monday, February 14, 2022 4:35 PM >> *To:* AnimalFarm Microwave Users Group >> *Subject:* Re: [AFMUG] OT: CBRS >> >> >> >> With Baicells LTE it's possible to leave the CPE in non-CBRS mode (either >> by not enabling it, or by just never upgrading the firmware to the CBRS >> capable version), and they'll connect to a CBRS eNB just fine... I wouldn't >> be surprised if that's true for some of the other LTE products too. >> >> >> >> On Mon, Feb 14, 2022 at 3:23 PM <dmmoff...@gmail.com> wrote: >> >> Well it occurred to me that I’m thinking of Cambium 450 which forces you >> to play by the rules by disabling bridging until the CPE is authorized by >> the SAS. Maybe Andy has a different product that works differently. >> >> ….but yeah all fixed CPE are supposed to be in the SAS. >> >> >> >> I think mobile devices don’t need to be registered. Since Andy mentioned >> eNB I’m guessing maybe he’s got an LTE product, and maybe the vendor allows >> you to pretend the UE are all mobile? >> >> >> >> >> >> >> >> *From:* AF <af-boun...@af.afmug.com> *On Behalf Of *Mathew Howard >> *Sent:* Monday, February 14, 2022 4:16 PM >> *To:* AnimalFarm Microwave Users Group <af@af.afmug.com> >> *Subject:* Re: [AFMUG] OT: CBRS >> >> >> >> Yeah, if they're still running without being registered, you've got some >> problems that need fixing... >> >> >> >> On Mon, Feb 14, 2022 at 3:09 PM <dmmoff...@gmail.com> wrote: >> >> If you’re using CBRS then your CPE can’t connect at all if it’s not >> registered with the SAS. It literally won’t connect. >> >> >> >> I think you may be stuck in another time period. >> >> >> >> >> >> *From:* AF <af-boun...@af.afmug.com> *On Behalf Of *Andy Trimmell >> *Sent:* Monday, February 14, 2022 4:05 PM >> *To:* af@af.afmug.com >> *Subject:* [AFMUG] OT: CBRS >> >> >> >> Do all of you individually register your CPEs? I just got an email out >> of the blue telling me I need to register each one of the CPEs that are >> connected to my eNBs. Am I just misunderstanding what he’s saying? >> >> >> >> >> >> >> >> Andy Trimmell >> >> *Business Manager* >> >> *PDS Connect* >> >> 317-831-3000 >> >> >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
