The answer is yes:
A witness said it was "absolutely inconceivable anybody could go that fast,
then just stop, and survive." But Stapp did—in fact, he went on to live another
45 years, dying quietly at home in 1999 at the age of 89—and he experienced a
record-breaking 46.2 G's.
From: Chuck McCown via AF
Sent: Sunday, May 22, 2022 12:52 PM
To: AnimalFarm Microwave Users Group
Cc: Chuck McCown
Subject: Re: [AFMUG] Ot: my adventure
Use ring magnets to accelerate and decelerate. Vacuum tunnel. Say a mile of
magnets on each end, I’ll bet you can make the trip in 3 minutes. 20,000 mph.
Zero to basically orbital velocity and back in 3 minutes.
The forces on the tamale would be 45G. I think with a good container it would
survive it. Have to be saturated with lard.
From: Forrest Christian (List Account)
Sent: Sunday, May 22, 2022 12:38 PM
To: AnimalFarm Microwave Users Group
Subject: Re: [AFMUG] Ot: my adventure
Have you done tests to determine the maximum acceleration a tamale can
withstand?
If you suck all the air out of the tube you might be able to reach such a high
velocity that you can have an army of Mexican aunts making tamales to order and
have them arrive still warm.
Maybe you could get Elon Musk's hyperloop to fund the whole thing as a small
scale experiment for their whole transport people in tubes thing.
On Sat, May 21, 2022, 9:30 PM Steve Jones <thatoneguyst...@gmail.com> wrote:
Im slowly gonna sneak in 2 inch duct here and there heading south til I get
to your place. The Texas to Illinois tamale pipeline. Once people find out
about tamale pipelines, the underground markets gonna explode
On Sat, May 21, 2022 at 10:23 PM Jaime Solorza <losguyswirel...@gmail.com>
wrote:
You got this Steve..
On Sat, May 21, 2022, 3:24 PM Steve Jones <thatoneguyst...@gmail.com> wrote:
So for the last three months I've been creating my company, getting all
that stuff in order, spending a shit ton of money (for me). But the last pieces
are falling in place on monday. I pick my drill back up from vermeer (12,300
dollar repair quote, but they managed to fix my strike alert and saved me 3000
bucks). Probably not a good business decision to put that much into an old
drill when the drill is worth less than the repair, but it gets me in a drill.
I have a contract that's local for around 2 years work, fairly low rate
per foot compared to what's out there, but its local and all I can eat when I
want to eat it, so I can keep my fulltime job while I transition. I figure
spend this year and maybe next building experience with my son, then chase the
bigger dough.
The underground industry seems a whole lot like the wisp industry, where
theres a whole bunch of strangers willing to help strangers succeed with good
advice. Theres some assholes, but same here.
Once I get operational and have the toolset refined with some experience
I'll be heavily pimping to the wisp degenerates turning fisp, I think theres a
good number that a guy can operate at to be affordable to small outfits and
still get a little money in the wallet.
My kid operated a mini ex for the first time, the video games actually
paid off, he got the feather concept of the controls down, so he may leave me
to go do that after some experience, dont blame him a bit if he does, equipment
operators get the best cushions in the seats and the best paychecks.
Just need to hand over the workmans comp certificate when I have the
drill back in hand and I start making the millions.
God is good, even if I'm not.
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--------------------------------------------------------------------------------
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--------------------------------------------------------------------------------
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
