IIRC, CNUT not only uses the SNMP community string, but it also needs to
login to the SM. Make sure you have the username/password set for CLI
access.
bp
<part15sbs{at}gmail{dot}com>
On 10/17/2022 11:09 AM, Mark - Myakka Technologies wrote:
I still have a couple of customers on Canopy FSK900. Had to replace a radio due to storm
damage. Radio is at FW 7.2.9. I'm trying to upgrade to 10.5. Dusted off all my CNUT
stuff. Have everything loaded and discovered, but keep getting "No SNMP
response" from SM. I can log into SM and see the SNMP community and it matches the
CNUT settings. Tried v1 and v2c with no luck. Any ideas?
--
Thanks,
Mark mailto:m...@mailmt.com
Myakka Communications
www.Myakka.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
