When I was drilling $15 was the lowest I would take. I got $23 for some jobs.
From: Carl Peterson
Sent: Thursday, December 22, 2022 8:56 AM
To: AnimalFarm Microwave Users Group
Subject: Re: [AFMUG] HDD per foot cost
I'm paying $15 and supplying all duct, trace, and mule tape. Seems high but it
is a rush project and other utilities are tight in some areas. Getting the
project done on time is important so I wasn't as concerned with the cost. Just
wondering what I should be looking for for ongoing work.
On Thu, Dec 22, 2022 at 9:31 AM Aeron Wireless <b...@aeronwireless.com> wrote:
I think this past summer we paid $11/ft in Michigan. We negotiated that price
winter of '2. I'm sure it's higher now.
HDD drill plus 2x 1.24" SDR11 with tracer pull back. We supplied all
materials.
sent from my android phone
On Thu, Dec 22, 2022, 10:25 AM Carl Peterson <cpeter...@portnetworks.com>
wrote:
What is the going rate per foot for HDD drilling and pullback of two SDR11
ducts and a trace wire? Very sandy soil in the FL panhandle. All materials
provided? Around 4-5K' split into three or four runs.
--
Carl Peterson
PORT NETWORKS
401 E Pratt St, Ste 2553
Baltimore, MD 21202
(410) 637-3707
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
Carl Peterson
PORT NETWORKS
401 E Pratt St, Ste 2553
Baltimore, MD 21202
(410) 637-3707
--------------------------------------------------------------------------------
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
