Another option. Check out OcNOS from IP Infusion. CLI is almost identical to Cisco and it's a great value. OcNOS runs on white label boxes so you can choose the hardware platform that fits your needs (what I've ordered so far comes with OcNOS pre-installed). Lots of hardware choices from Edgecore and UfiSpace. IP Infusion supports others, too. OcNOS is a full featured carrier-class routing/switching OS and includes full BNG, MPLS, L3/L2VPN suite, etc. A Ufispace S9510-28DC-9N0A with DC power and OcNOS MPLS license is about $8K and is comparable to the Juniper MX204 in terms of features, capacity and port count, including full route tables if used at the border. On the low-end, the Ufispace 9502-16MT with MPLS license and DC power is about $2200 and has all the same capabilities/features as the bigger box, just less capacity and port count. Great platform. I suppose technically the white label boxes are L3 switches in so much as the ASIC that runs it a switch chip at its hard, but all routing, label switching, and L2 switching (data plane) takes place in the ASIC. Control plane is handled by the CPU. Worth a look. We have OcNOS interoperating with Juniper, Mikrotik and NetElastic on OSPF/MPLS/VPLS.

On 1/11/24 11:16 AM, dmmoff...@gmail.com wrote:

Arista goes both ways.  We have a number of Arista L3 switches, and also a big modular chassis thing comparable to a Juniper MX.

Full routes just depends on the model.  Some of them can’t do it.

 

We started buying Arista a couple of years ago when Juniper changed their pricing model.  Good products.  CLI almost identical to Cisco, so it’s old hat.  I have no complaints with Arista.

 

-Adam

 

 

From: AF <af-boun...@af.afmug.com> On Behalf Of Daniel Pautz via AF
Sent: Thursday, January 11, 2024 11:00 AM
To: AnimalFarm Microwave Users Group <af@af.afmug.com>
Cc: Daniel Pautz <d...@webnx.com>
Subject: Re: [AFMUG] Used Juniper

 

Is it really considered a router or just high end switch? Eg  does it take full multi tables, etc?  what model?     I have always considered playing with some Arista’s.

 

From: AF <af-boun...@af.afmug.com> On Behalf Of Zach Underwood
Sent: Wednesday, January 10, 2024 8:00 PM
To: AnimalFarm Microwave Users Group <af@af.afmug.com>
Subject: Re: [AFMUG] Used Juniper

 

While not juniper and with no support we have done very well with used Arista. We got 12x 100gb +24 x40gb router that can do bgp for under 10k eaxh.

 

On Wed, Jan 10, 2024, 9:54 PM Jason McKemie <j.mcke...@veloxinetbroadband.com> wrote:

Is this worth looking at or is it too problematic from a support / update perspective? New Juniper is not in my budget.

--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com



-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to